Custom P90 Battery

How to fit a bigger battery into your P-90!

Kindly translated by Jeremy Kao [azn_with_nsx@hotmail.com] from the original article found here: http://freehomepage.taconet.com.tw/This/is/taconet/top_hosts/v5915/html/test/p90-02.htm

Update Monday, October 22, 2001 10:41 PM: Those nice folks over at Intruder Shop/Guarder (www.intrudershop.com.tw) kindly emailed in to inform us that the following article is about their innovative and pioneering design for the P90 custom battery. In their own words "...allthough a Catonese 1700 mAh version has been copied and is available on the market now, we'd still like to claim credit for the original concept of the 1500 mah P90 battery...".

Tokyo Marui's Project 90 has been on the market for almost 3 months now. This futuristic airsoft gun is almost perfect, but the 8.6V 600mAh battery seems not enough for a long game.

Here is how you can improve your P-90 by using a 9.6V 1500mAh battery.

How do we fit this biggy into the little space of the P-90?

Materials:

1. A saw [the ones that used to saw models because it make a thiner cut]

2. Screw driver [the + ones]

3. Sanding material

Step 1. Open the back of the P-90 and take out the mechbox back board. Then saw off the back board like this,

Saw it like so it looks like the one on the right.

Step 2. Take the back board of your P90 and sand the board like so,

Sand it so it looks like the one on the right.

Step 3. Screw back the mechbox back board, and then put the battery in like this,

This is how the battery should fit.

Step 4. Time to rock n' roll!

P.S. I would recommand to simplify the wires inside to fit the battery better.