Danke Posted December 25, 2014 Report Share Posted December 25, 2014 I'm running propane and I think most others will chime in also. I did wrap the leading threads with teflon tape. Link to post Share on other sites
Wingmann Posted December 25, 2014 Author Report Share Posted December 25, 2014 It's leaking somewhere in between the adapter and the receiver. I can't tell which of the 2 seals but I have the orings soaking in silicon oil right now. Are you sure it's coming from the junction and not from the inside valve? Try this: Undo the tube and put a good squirt of lube in the intake (top hole). Shoot some BBs and recheck for leaks. Link to post Share on other sites
Feyd Posted December 30, 2014 Report Share Posted December 30, 2014 Quick heads up, fixed a leak from the buffer tube/body joint. Original 'o' ring had given out. AEG piston head 'o' ring replacement worked a treat! Tiny little bit thicker than the original, greased up, sealed perfect! Link to post Share on other sites
skyrider1 Posted December 30, 2014 Report Share Posted December 30, 2014 Are you sure it's coming from the junction and not from the inside valve? Try this: Undo the tube and put a good squirt of lube in the intake (top hole). Shoot some BBs and recheck for leaks. Very possible, I am not familiar with the internals of the m870. I'll have to do more reading/testing and see if the valve might be the issue. Link to post Share on other sites
Pascotam Posted October 6, 2015 Report Share Posted October 6, 2015 I have installed it successfully tiny Breacher. Very well-balanced. ~ Pascotams iPhone TapaTalk Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.