Jump to content


Photo
- - - - -

Marui M870 Clone: New Versions


  • Please log in to reply
13 replies to this topic

#1 chas

chas

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 2,939 posts

Posted 30 August 2017 - 07:10 AM

I'm not sure if everyone's heard of the original clone: a 100% copy of the Marui gas system 3/6-shot M870.

 

I bought mine like a year ago, still running fine, no misfeeds in either 3- or 6-shot mode, superlight, full metal, no bulging gas container... might need to change O-rings on it, though. Fantastic gun, paid 120$ for it and one of my best airsoft buys, compared to both low-end and high-end products.

 

Anyway, Golden Eagle (Jing Gong or whatever) have now released an updated version with an extended ammo tube for just 87$:

 

http://airsoft.tiger111hk.com/p35807/Golden-Eagle-M870-Tri-Burst-Gas-Pump-Action-Shotgun-(Black)/product_info.html

 

Regular ammo tube version in tan and black furniture:

 

http://airsoft.tiger111hk.com/p35806/Golden-Eagle-M870-Tactical-Gas-Pump-Action-Shotgun-(Tan)/product_info.html

 

And a tactical version (M4 stock, upper rail system and extended tube, can't tell if the side shell carrier is part of the rail system or not) for just 116$:

 

http://airsoft.tiger111hk.com/p35808/Golden-Eagle-M870-AR-Tactical-Tri-Shot-Gas-Pump-Action-Shotgun/product_info.html

 

I don't need one, but I might grab one just be able to say: I got a Marui clone for under 90$!


Edited by chas, 30 August 2017 - 07:12 AM.

  • johny_blaze and AG1212 like this

#2 chas

chas

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 2,939 posts

Posted 30 August 2017 - 12:53 PM

I should have ordered this morning: they raised the price to 110$ for the regular models and 140$ for the tactical model. I guess the original price was an error. Well still cheap enough.

 

The tactical version is still cheaper than either the Angry Gun or the G&P stock adapter for the marui M870.  :D 



#3 Batmause

Batmause

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 203 posts
  • Gender:Male
  • Location:Budapest, Hungary
  • Country:Hungary

Posted 30 August 2017 - 01:00 PM

I think that the prices are correct, it is much cheaper the product anything in CN. The stock version is around 110$ everywhere so the tactical version also good for 140bucks. I'm looking forward for the cheap replacement parts for TM M870 by the chinese because the weak internal, plastic shell is crazy expensive at this moment - I need to buy a GE M870 to replace it which is a joke.

 

As I know, Secutor also do some customization on GE shotguns like this. So I think the chinese got idea from them which means there will be more custom made versions in the following days...


Edited by Batmause, 30 August 2017 - 01:01 PM.

My armory
Pistols: Glock G23, Detonics Combat Master, Silver Shark (RaceGun based on TM 5.1)

GBBRs: WE G36c, KJW 10/22, GHK PDW, VFC HK416 D10.5RS

Craps: Benelli M3, DBoys KAC PDW AEG, Fully custom made M4A1 RASII AEG


#4 hitmanNo2

hitmanNo2

    Your friendly neighbourhood hitman

  • Forum Regular
  • PipPipPipPip
  • 5,987 posts
  • Gender:Male
  • Location:England - the world's official novelty country
  • Country:United Kingdom

Posted 30 August 2017 - 01:13 PM

Any word on a breacher?


gallery_3510_769_19216.jpg

.......   .....  ....00110001 00111001 00110001 00110001
                    Wanted - Prime/PGC MEU metal frame for WA

 

 


#5 renegadecow

renegadecow

    is brony

  • Forum Regular
  • PipPipPipPip
  • 8,582 posts

Posted 30 August 2017 - 02:53 PM

I'd be totally on this if it weren't for all the TM shotguns I've had to fix through the years with their dumb reversed valve.



#6 Wingmann

Wingmann

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 1,665 posts
  • Gender:Male
  • Location:Pamplona, Navarra
  • Country:Spain

Posted 30 August 2017 - 06:01 PM

LOL@Secutor.

 

Move on :D


  • AG1212 likes this

= I have practiced fourteen hours a day for thirty-seven years and now they call me genius -Pablo Sarasate, musician and composer =


#7 harborne blue

harborne blue

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 1,158 posts

Posted 30 August 2017 - 10:36 PM

Tempted to buy the tactical one just for the parts!


When the pin has been pulled, Mr Grenade is no longer our friend...
------------------------------------------------------------------------------------------------------------
Omnes una manet nox - Omnes vulnerant, ultima necat

I won't sit down, I won't shut up and most of all, I will not grow up!


#8 chas

chas

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 2,939 posts

Posted 31 August 2017 - 06:54 AM

I should have ordered this morning: they raised the price to 110$ for the regular models and 140$ for the tactical model. I guess the original price was an error. Well still cheap enough.

 

The tactical version is still cheaper than either the Angry Gun or the G&P stock adapter for the marui M870.  :D

 

OK. The black/extended tube is now 110$ and the tan one is 99.44$. What a rollercoaster.

 

I think that the prices are correct, it is much cheaper the product anything in CN. The stock version is around 110$ everywhere so the tactical version also good for 140bucks. I'm looking forward for the cheap replacement parts for TM M870 by the chinese because the weak internal, plastic shell is crazy expensive at this moment - I need to buy a GE M870 to replace it which is a joke.

 

As I know, Secutor also do some customization on GE shotguns like this. So I think the chinese got idea from them which means there will be more custom made versions in the following days...

 

Don't get me wrong: I was complaining about the price changes, not the prices themselves. A regular model is well worth 200$. The tactical could easily go for 300$ and it would still be a fair price.

 

Mind you, I have never held a marui one, but reading about the problems that many had out of the box, I don't see why this clone should be a third of the TM price. Marui's finish seems nicer, though.


Edited by chas, 31 August 2017 - 06:55 AM.


#9 Number5

Number5

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 522 posts

Posted 31 August 2017 - 01:05 PM

£60 for postage though!? Makes it less economic. I wonder if that's a website mistake...

Edit: no, don't think it is.

Edited by Number5, 31 August 2017 - 01:08 PM.

AKA
BATFINK

Pro Lucror


#10 Batmause

Batmause

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 203 posts
  • Gender:Male
  • Location:Budapest, Hungary
  • Country:Hungary

Posted 01 September 2017 - 10:02 AM

...

I have a TM M870 but I have a lot trouble with it, just see my list bellow.

- broken internal plastic shell (impossible to get replacement)

- broken pumb-arm (70$ for a steel one or 20ish USD if you find a stock one)

- broken nozzle and hopup chamber (WiiTech is around 110ish, finding a stock is clearly impossible too)

- it is leaking all the time after the sealing o-rings lose the grease or silicone oil on them (I designed a new valve nest and stock connector part which solved the problem completely now)

 

Now I bought more as the stock, original TM M870 which isn't too big deal. For example I have less problems with my PPS M870. I don't recommend the TM because they can cause a lot s*ck sometimes and I read the same experiences with it around the world. Or you can buy one but use it with weak gases, like 134a. This gun is great for parts for example to refurbish a TM...haha...like a bad joke... :no:


Edited by Batmause, 01 September 2017 - 10:04 AM.

My armory
Pistols: Glock G23, Detonics Combat Master, Silver Shark (RaceGun based on TM 5.1)

GBBRs: WE G36c, KJW 10/22, GHK PDW, VFC HK416 D10.5RS

Craps: Benelli M3, DBoys KAC PDW AEG, Fully custom made M4A1 RASII AEG


#11 harborne blue

harborne blue

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 1,158 posts

Posted 03 September 2017 - 04:54 PM

Bespoke Airsoft have these in stock - not on their website but they posted this on FB the other day. Good people to desl with - James is a top bloke and one of the best gun techs in the business.

https://www.facebook.com/bespokeairsoft/photos/a.541143512677526.1073741828.525289064262971/803379899787218/?type=3&theater 


When the pin has been pulled, Mr Grenade is no longer our friend...
------------------------------------------------------------------------------------------------------------
Omnes una manet nox - Omnes vulnerant, ultima necat

I won't sit down, I won't shut up and most of all, I will not grow up!


#12 harborne blue

harborne blue

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 1,158 posts

Posted 03 September 2017 - 04:58 PM

Actually on the website - my bad! http://www.bespokeairsoft.co.uk/_shop/secondary-shotgun/ 


When the pin has been pulled, Mr Grenade is no longer our friend...
------------------------------------------------------------------------------------------------------------
Omnes una manet nox - Omnes vulnerant, ultima necat

I won't sit down, I won't shut up and most of all, I will not grow up!


#13 chas

chas

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 2,939 posts

Posted 04 September 2017 - 09:40 PM

Way cheaper here:

https://airsoftyecla.es/escopetas/

http://www.maxaventuras.com/tienda/876-secutor

#14 Batmause

Batmause

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 203 posts
  • Gender:Male
  • Location:Budapest, Hungary
  • Country:Hungary

Posted 05 September 2017 - 06:26 AM

I think I will buy one of these but I have the right budget for this a 2 month later. I ready want to refurbish my TM M870.

I hope that they will do the same custom project on the standard springers too. It will be nice to see also.


Edited by Batmause, 05 September 2017 - 06:28 AM.

My armory
Pistols: Glock G23, Detonics Combat Master, Silver Shark (RaceGun based on TM 5.1)

GBBRs: WE G36c, KJW 10/22, GHK PDW, VFC HK416 D10.5RS

Craps: Benelli M3, DBoys KAC PDW AEG, Fully custom made M4A1 RASII AEG





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Site Meter