Jump to content

DualWieldNate

Regular Poster
  • Content Count

    229
  • Joined

  • Last visited

About DualWieldNate

  • Rank
    Regular Poster
  • Birthday 02/26/1980

Additional Information

  • Airsofter since
    2002/3
  • Toy collection
    Star M14 SOPMOD
    ICS M4 RIS
    G&P M4 CQBR
    WA Colt Government Series 80 Deluxe
    WA Two Tone Para Ord
    TM M92f Samurai Edge
    KSC G23f
    Maruzen CA870 Charger
  • Most likely to say
    "Get In!", "TBH" or "To be fair..."
  • Country
    United Kingdom

Contact Methods

  • Website URL
    http://
  • ICQ
    0
  1. I was thinking along those lines myself. I also forgot to stick on my Insight M3X, it's usually on there, but I was messing with the gearbox last night so had the rail off.
  2. When you shoulder the rifle and look down the aimpoint you can't see the PEQ at all. Unfortunately I can't get the PEQ in FG, the rails are a temporary measure until I get some XTM covers. That said I may get a mixed bunch anyway rather that one colour. The all matching colours thing used to bother me (hence buying the full FG set for the standard front end) now I'm just not arsed. If it's comfy, works and isn't luminous colours I'm happy.
  3. Posted my M4 last week with a UBR on but I've since removed it and put it onto an SPR as it was too long for the short front end I have fitted. I've refitted my original parts and I think she looks all the better for it: Alternative front end can be fitted in a few minutes if I have an armourers wrench handy:
  4. Recent shenanigans on my old beat up M4, apologies for pic I'm not the best cameraman. I've got a full FG set I used to have on a previous incarnation of this rifle and I'm thinking of putting the CTS back on as the UBR is possibly too long for such a short barrel. It is however, very comfortable and rock solid.
  5. Which location would you have this? Because on closer inspection to the hop unit and the section the nozzle goes into there IS a metal ball bearing with a spring pushing it down, there's a second grub screw near the hop which tightens the grub screw and thus the spring.
  6. Most peoples have been on the higher side of the 400s. Mine is only doing 420 but most peoples are pushing towards 450-500?
  7. What was the postage time like from them? I was looking at their site on Monday with a view to buying the Five seveN.
  8. I noticed barrel wobble last night but the screws did need tightening a touch. I've not skirmished with it yet so that will tell how stable it is.
  9. Unfortunately my rifle dropped about 30fps from first trying it which I'm really gutted about. ~430/440fps atm aint worth using on the skirmish field and I've found no way of reliably upgrading it On a side not has anybody else had issues with their AGM POSPs? Mine only illuminated very briefly when I got it and since then I've bought new batteries and gotten nothing. The reticule is so thin that without illumination its virtually unusable.
  10. How much heavier? I did 0.3s in my post a page or two back.
  11. Going further on what I said regarding the cheapsoft scope. If you have a Dremel and don't mind 5 minutes work you can make the scope fit better and what's more NOT dmg the top cover of your rifle. I can still screw out the brass section I've just ground quite a bit of it away. It's surprisingly soft and wasn't an issue for my Dremel.
  12. Mine isn't doing that, its doing 430-440 at best on 0.2s. I tried almost exactly the same thing but with a spring that had been doing over 400 in an AEG, hence me taking it out of that. I got 370-390 readings on my Chrono I'm thinking The same thing, I wanted a Skorpion for this exact purpose. Might try and pick on up.
  13. My AEG springs fit fine, I was just conerned about the power. If I'm sniping with this I'd like it up towards high 400s.
  14. I've read in a few places that AEG springs aren't that suitable in these. I tried a spring from a gun that I had that was hot on purchase and the SVD only kicked out 400fps :-/ Anybody upspringed these successfully? If so what did you use?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.