APS eSilver Edge Gear Box

APS have shared details of their new gear box:

eSilver Edge poster

eSilver Edge Gear Box

After years of development, APS finally released their first Electronic Gear Box, named eSilver Edge Gear Box. A micro chip (Super Dynamic Unit) S.D.U.  that works together with magnet gears set, reinforced piston, quick change spring guide and micro switch trigger that gives you instant trigger response when shooting.  Below are the features of this eSilver Edge Gear Box:

Outstanding GearBox Specification:

Base on our design and testing, eSilver Edge Gear Box works perfectly under 7.4v to 12.5v. The current are always stable at <11 Amps in any voltages between 7.4v to 12.5v. Low and stable Amps means it drains less battery and the lifespan of the components could last longer.

Use of Advanced S.D.U. chips

The S.D.U. chipset that used in eSilver Edge Gear Box has a unique function that stop the gearbox from further damage if electric current is too high. Simply to say, electric current / Ampere will increase if there is a malfunction inside the gearbox. For instant, bad motor, damaged gears or short circuit. When our S.D.U. detected more than 5 trigger presses in exceed Amps, the whole gearbox will shut down to prevent further damage. User has to disconnect and then reconnect the power supply to reboot the gearbox, we strongly recommended user to check the internal immediately if mal-function happened.

Micro Switch Trigger

eSilver Edge Gear Box standard comes with micro switch trigger works together with the S.D.U.,  providing you an instant trigger response when shooting. Base on our testing, the response time of the switch is just 0.02 sec, with the short stroke design of the trigger, it is unbelievable fast and you won’t feel any trigger delay when shooting.

Reinforced parts

APS standard Silver Edge Gear Box has long been famous in its durability. APS eSilver Edge Gear Box further develop its strength, our electronic parts could works between -20°C to 80°C and our mechanical parts could works between -40°C to 85°C. The gear box shell is reinforced, it works under M190 spring used. The rear wires of the gearbox were braided with PET sleeving provides extra protection for the wires. eSilver Edge gearbox standard comes with full steel teeth piston that increase the durability of gearbox too.

Ambidextrous design

There are several electronic gearbox manufacturers in the market but none of them come with Ambidextrous design. APS eSilver edge gearbox revolutionary made an electronic gearbox that could be used in Ambidextrous guns, it works perfectly on APS Ambidextrous rifle fully compatible with V2 Gearbox in the market.

To conclude, APS eSilver Edge Gear box has so many advance features that it will sooner become one of the best gearbox in the market. The Electronic S.D.U is replaceable, repairing is easy and friendly. It comes with Dean’s plug but optionally convertible to Tamiya plug with EBB / AEG function base on request (MOQ 20pcs). Parts are TM compatible, which means further upgrade is available if needs.

eSilver Edge-ReSilver Edge-LeSilver Edge-part1eSilver Edge-part2eSilver Edge-part3eSilver Edge-part4eSilver Edge-part5eSilver Edge-part6

(APS)

On this day..

Comments are closed.

Looking for somewhere?
Podcasts
airsoftology
The Airsoft Discussion
Gorilla Airsoft Radio
Airsoft Medicine
SSMG.se Specialist Swedish Military Experience Group
Subscribe to our news

Enter your email address:

Delivered by FeedBurner

News Feeds
Archives