Introduction:
This is the start of a new addition of technical information to the site.
The "Technical Pages", will include the slightly more
complex aspects of airsoft maintenance. Therefore these pages will include:
1st/2nd Gen Parts Diagram: Here you'll find an link to an image on the left of the exploded parts diagram for the KSC M93r (1st and 2nd gen). This has been scanned in from the manual that came with the pistol in the box. Click the image to the left to get a larger version of the image. Auto9 Parts Diagram: You'll also find the exploded parts diagram for the KSC Auto9 (the RoboCop replica) linked and thumbnailed to the left. Click the image to the left to get a larger version of the image. |
Hop-up adjustment: In the box with your KSC M93r variant you'll find a few curious tools. One is a small allen key, the other is a small cut piece of steel. These tools are for adjusting the "hop-up", this is the cunning mechanism that puts back-spin on the BB, to create a straight and more accurate flight-path. To adjust the hopup, you need to turn the small brass ring that's found at the rear of the barrel (which can be viewed by locking the slide back) with the custom tool provided. Turning the brass ring anti-clockwise (to the left) turns hop-up ON. Turning the brass ring clockwise (to the right) turns hop-up OFF. This can be shown in more detail on the image to the left. Click on the image to view larger version of it. You don't need to turn the brass dial a great deal. - I'd recommend adjusting it by no more than 1/8th of a turn at a time (testing BB shot accuracy between adjustments). |
M93r Disassembly: If you really are a die hard techie.. or just want to upgrade or fix your M93r, then these technical diagrams should be of use to you. These images below are the complete technical disassembly instructions. |
Links: Movie of the KSC M93r in action
This page last updated: Sunday, January 12, 2003 6:32 PM
copyright 2001Arnie's Airsoft