Jump to content

All Activity

This stream auto-updates     

  1. Today
  2. Gunmane

    My eye! Sweet Jesus, Ouch!

    It is perhaps hard to feel it as much when it has been going on and off for the past 6 months or so. Any time my mother goes down to visit her she seems to come back to life briefly but then a day or say later it goes "took a turn for the worst." Now that it is definitive I sort of feel like I would rather her be allowed to pass peacefully rather than go through a shutdown that is only being ignored through painkiller injections apparently.
  3. Gunmane

    Schnitzel with noodles - what made you smile today?

    Always fancied a field gun for the backyard, purely to spook out the golfers that try to hop the fence or worse drive into it via the neighbors fenceless yard.... Finally figured out why the bizon gearbox would not work, it was the sodden selector bits. Managed to glue the peg to the lever and it so far works (I think) so no to having to pay near 30 dollars for an ics one (I wish stateside shops would stock those more often and cheaper). Ordered some bits from my favorite shop and hopefully will get the gearbox up to snuff for the games in April. Not so bad if the cart amount was less than a day's worth of work right? I also got to pry off something that was stuck to kitchen wall (little shelve platform that this decades old island platform mother always hated) with a pry bar, fun times.
  4. Yesterday
  5. RedScare

    Anyone still around from the old days?

    lol Titleist, he was admitting to breaking several different laws on this forum way before he got popped for exporting stuff. Some of the mods, that are no longer here, made the forum pretty toxic and let their ego get in the way. I stopped logging on mostly because I was already talking to other members off the forum, then my local field closed down, and i got into real steel. I pop in once in a while to check the news section or see if any gear is being sold. I miss the camaraderie
  6. judgeman

    Glock Picture Thread

    Umarex Glock 17
  7. sandstorm

    Gas Rifle

    And unless you're willing to go into the woods, be preapred to compare AR-pattern rifles. There are, now, G3's coming, and MP5s are in couple varieties, some AKs, but maybe 80% of gas rifles are ARs of some ilk.
  8. DiscoBiscuit

    WE Hudson H9

    Hudson would continue to own the IP and Trademarks which are still protected, bankruptcy doesn't mean it's open season to rip them off, it doesn't even necessarily mean they will discontinue operations. The IP and TM will be looked at as assets, however negligible, that creditors can use to make themselves whole or that Hudson will retain in an attempt to restructure.
  9. hitmanNo2

    WE Hudson H9

    Maybe they can knock a few $ off that ridiculous $180 price tag.
  10. 1st Commando

    WE Hudson H9

    I would think they will still get released . In fact they may make more margin now they don't have to pay royalties
  11. Got Wood?

    Gas Rifle

    I’ve picked up an Army G36 that I’m pleasantly surprised with. I wouldn’t use it every game though. Only advice I can give is pick something with spare parts are plentiful, upgrades are available if you want, and expect it to be a bit lacking unless it’s ideal weather
  12. Got Wood?

    WE Hudson H9

    Would love a Bren 10. Never understood the hype around the genuine article on this though
  13. hitmanNo2

    WE Hudson H9

    Well Evike is still taking pre orders for an ETA May release. Maybe a limited run and then done?
  14. renegadecow

    WE Hudson H9

    To me it's like a plane that never flew. Unlike other guns which are long out of production, their historical use and involvement in films/video games would boost their popularity.
  15. Hardcore1-6

    Gas Rifle

    Afternoon all, I've notoriously had bad luck with AEGs. My one saving grace is that my gas pistols are always dependable. Question - Where to start with gas rifles? I'm confused as to types and what is recommended. My play style is methodical, and I fire single shot only. #hatredofspeedsoft #fullautofortherangeonly Is there a starter guide anyone can recommend?
  16. shmook

    My eye! Sweet Jesus, Ouch!

    What hardcore said. It's a rubbish time, sorry to hear you're going through it bud ☹️
  17. hitmanNo2

    WE Hudson H9

    I don't see why WE would abandon it. They've already invested in molds, licensing etc. Plus, it will have the rarity factor that people won't be able to buy the RS but can buy the airsoft version if they like it.
  18. Wingman

    WE Hudson H9

    To bad. Went the way of the Bren Ten. Was kind of looking forward to this...as I was the Bren Ten.
  19. Hardcore1-6

    My eye! Sweet Jesus, Ouch!

    Stay strong for your family - grief has a different affect on everyone. For now, cherish the fact that your grandmother is a good person, that has raise you and your mother. Your mother needs you to be there for her but shutting out what is happening right now isn't for the best. Work is work, airsoft is airsoft. It will both still be there in a day, 6 weeks or 5 years. Be there for your mother and family, accept that you cannot be everywhere at once. If you feel a necessity to shut down, have an end state for recovery - give yourself an afternoon or evening just to go for a walk and mentally process what is happening.
  20. renegadecow

    WE Hudson H9

    With Hudson filing for bankruptcy, I'm wondering if WE is still pushing for this?
  21. Black_Bird

    H&K Picture Thread

    I agree, I don't think I'd put it on any other gun. Thanks and Never give up hope! The world needs more G3s on the field! Thanks and I originally planned to get a KA style grip for it. Got the Magpul after shooting a buddies AR with one. It was just more comfortable for me.
  22. Gunmane

    My eye! Sweet Jesus, Ouch!

    Work taking its usual toll on me, mixed with the fact my grandmother is all but dead now. Not sure if she will go whilst I'm working tomorrow or during the next week. It is hitting mother hard, and there is not much I can do besides let her cry or repeat things to me over and over. I've tried to keep my mind off of it so I don't shut down, but as darklite can tell, my efforts via trying to fix my bizon have only made things so negative I'm just wanting to quit all together this hobby sometimes. In short, *fruitcage* spring.
  23. druid799

    H&K Picture Thread

    Gorgeous looking gun but the magpul grip looks hideous on it way too modern for my liking i’d go for an old school knights armourment Type my self , but that’s just me , I’m an old fart that hates seeing new and old mixed up ! 😂😂😂
  24. Last week
  25. NonEx

    WE All new P-series GBB pistol

    Full size AEG F17 / WE Sig Sauer M17 with and without markings are now available at KY Airsoft. Black and tan. $90 USD for unmarked and $129 USD with markings. https://www.kyairsoft.com/catalogsearch/result/?q=F17
  26. renegadecow

    WE/Cybergun M1A1 Thompson Submachine Gun

    It's a fairly simple compression spring with lots of tolerances so finding a suitable replacement won't be too hard. You can also insert a smaller diameter spring inside it to bring the tension up, maybe from a ballpoint pen. One other modification (if you could call it that) which I now remembered after going over my internals is polishing the top and edges of the disconnector (#62) where it engages the trip (#67).
  27. AMPZ28

    WE/Cybergun M1A1 Thompson Submachine Gun

    Do you know of a possible higher tension spring? the sear in my mind seems pretty weak to be honest.I can't get rid of this random cycle issue.
  1. Load more activity
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.