Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 04/28/2020 in all areas

  1. 7 points
    So... I heard we are on a H&K thread. I have some H&K stuff. KWA gbb fresh from this morning.
  2. 6 points
    Hi, hello mmmmm hi... it's me again.
  3. 5 points
    Good lord that's one long boi. My contribution: maximum P L A I D
  4. 4 points
    SLR B15 now properly suppressed :). Non-suppressed will use an AAC Blast Shield (that's still on back order :()
  5. 4 points
    I was told there would be pestilence... #MakeCuringGreatAgain #Impeach05Council #NotMyPlague
  6. 4 points
    VFC MP5A5 Aeg -Rs stock -Rs body pins -Rs rear sight
  7. 2 points
    New products teased on TM's site - Glock 17 Gen4 GBB (Previously announced last year) - FNX-45 GBB Black version - Ruger LCP GBB (most likely)
  8. 2 points
    Yep, another Glock boring photo.
  9. 2 points
  10. 1 point
    The latest ERG from TM is the AK Storm NGRS. 17/4/20 release The latest NGRS AEG from Tokyo Marui, the AK Storm NGRS, is set for release on the 17th of April... "The next-generation electric gun 'AK Storm', which is a modernized custom made Tokyo Marui Original take on AK47, reveaked! We have produced custom parts that improve operability, such as a short barrel that is easy to handle, a stock that can select the shape according to the situation, and a Magwell that is easy to change magazines, a mount base with a backup site, etc. are adopted in various places. Major features: Equipped with a shoot and recoil engine: When the trigger is pulled, the bolt is activated at the same time as the firing, and the strong recoil generated inside the body is transmitted to the whole body. An auto-stop system that stops firing when the magazine is empty. It is a model that pursues the reality of operation and operability. Bolt release mechanism: Equipped with a bolt release mechanism that releases the auto stop by pulling the bolt handle. You can enjoy realistic operation procedures. (Nice) Metal parts used: Die-casting and press steel are used for the parts of each part, including the lower receiver, to produce a profound feeling that moves to the eyes and a feeling of weight when picked up, and also achieves high rigidity. By applying a defric coat to the lower receiver, the texture of steel black dyeing processing has been reproduced. M-LOK rail system: The latest rail system M-LOK is used on both sides of the hand guard with underrail. The hand guard, which allows you to add rails only where needed, is slim and easy to handle, and has been lightened by removing meat. The M-LOK rail with a width of 20mm (Picatinny standard) comes with one of three types of slots: 3 slots, 5 slots, and 7 slots. It can be easily removed with the attached hexagon wrench. Various accessory parts: Two types of M-LOK covers, two types of hand stops that support the hand holding the hand guard, and a special mount that can be attached at a lower position with the optional “Micro Pro Site” are included. Compatible with various muzzle options: If you remove the muzzle flash hider, you can install a muzzle option with a 14 mm reverse screw specification such as a silencer. Steel Press Magazine: Includes a magazine with 90 shots and a steel press outer case similar to the real one. With a built-in follower stopper, you can enjoy just firing without putting BB bullets in the magazine. * There is no magazine compatibility with the magazine for AK74. Magazine adapter included: By attaching the adapter to the main unit, the magazine for electric gun standard type AK can be used. * When the adapter is installed, the auto stop system and bolt release mechanism do not operate. Also, the magazine for the next-generation electric gun AK47 cannot be used."
  11. 1 point
    Been away from my online presence for a bit while sorting some things out. Got my head straight now though. So, first post here in a couple of months, where do I start? Covid19 is . Lack of airsoft is . I still, so far, have a job though which I'm grateful for. And my car hasn't yet shat it's gearbox out like people told me it would, so that's a plus point. How's everyone else keeping?
  12. 1 point
    Social distancing paint job...2 rattle cans and some free time Sent from my HD1900 using Tapatalk
  13. 1 point
    Actually, I'll stick with my H8R Mk2 revolvers with their adjustable hop-up, no shells, quick to load 10 shot "full moon clips", ability to actually be suppressed, and railed for mini-red dot (or scope) and weapon light. I know they dont really exist in real-steel, but they are very very good.
  14. 1 point
    That reminds me. I need to clean up my open tabs.
  15. 1 point
    My GHK uppers. Top: CQBR Bottom: 16" Recce
  16. 1 point
    I've used KJW G17/KP13 pistol magazines in my KJW, WE and TM pistols, so just get some of those and you should be fine.
  17. 1 point
    I had one .. Cool slide kit ..Sadly sold it but I kept the Prime/Nova ZEV G17L Wolf
  18. 1 point
    Yes, I bought one. Very nicely made but the outer barrel needs to be opened up inside very slightly if you want to fit a longer inner barrel. 10mm diameter and 10mm more depth will do it I also put in a Guns Modify lightweight blowback chamber to bring the moving mass weight back down a touch.
  19. 1 point
  20. 1 point
    Choate stock fitted. MI M-Lok ris WIP. Yes I'm a grown *albatross* man with Dr. Who sheets. No I won't apologise.
  21. 1 point
    Thread resurrection - shazam! Devgru 2011 Jump Set up (A few small inaccuracies, but close enough for my tastes) Pictured with CAG 2012 lid:
  22. 1 point
  23. 1 point
    [emoji41] Sent from my SM-G955F using Tapatalk
  24. 1 point
    Updated my brain bucket with some FMA nonsense.
  25. 1 point
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.