Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 04/26/2019 in all areas

  1. 7 points
  2. 4 points
  3. 3 points
  4. 3 points
    Been liking the look of my 416 unsuppressed recently!
  5. 3 points
    So a long time ago I got to use an AK in Slovakia that had a really nice dust cover rail on. Note how it's nearly identical to the Texas Weapon System rail, except it has the original rear sight on. Since I own the Asura TWS clone, I thought maybe all I need to do is replace the "bridge" to do what the little rail does on top. ^Asura rail. Work in progress: Still need a bit of tweaking, the rear sight sits 1.5mm higher than the original position, so if I cared enough I would adjust the front sight up by the same amount. Gotta come up with a way to put a spring in there to keep good tension, and a few more fitment issues, after that it's ready to get printed in steel!
  6. 3 points
    Reading an article about Detective Inspector Terry Hopkins, Police Officer and Veteran who killed himself on Christmas Eve. And then being angry, angry that the government doesn't look after Veterans yet can push pay rises through (as well as their bloody expenses, isn't that what a salary is for?) and pay for this Brexit cluster*fruitcage* but won't help people it sent into harms way. Angry that people don't really seem to give a *suitcase* as it's not a celebrity, it's not smut, it's not apocalypse level events (though to the family I'm pretty sure it is). Angry that people feel their only solution is to take their own lives because we've stigmatised mental health ("committed suicide") and people don't think they can share their problems and theres not enough work being done by the government to get the message out.
  7. 3 points
    PBS-1 replica arrived for my Bizon. Had to dremel out a bit on the end (and fight the gearbox again after having to take it out to put longer inner barrel in). Despite being non-steel it still got a bit of heft to it and oddly enough makes the bizon front heavy somewhat now (which is what most folks assume the bizon on its own to be when it isn't airsoft wise). I'm sure the longer barrel won't play nice with the cylinder but hey, maybe it will drop the fps down low enough again to make it 5 ft MED again.
  8. 2 points
    TM please make a GBB version of this in the future. This thing just too adorable.
  9. 2 points
    I mean it's not very friendly, but on the other hand, why make a big thing out it (the initial situation). *suitcase* happens.
  10. 2 points
    In case anyone is still interested, slow trickle of new stock available on their website now. It's a faint pulse but still alive nevertheless.
  11. 2 points
    "Hey Jim what's the best way to show off our new toys which specifically make the gunshot louder" "Compare it against a pistol that doesn't have the toy!" "Great idea. I can't figure out what's missing though." "How about music which makes it really *fruitcage* hard to hear the difference?" etc.
  12. 2 points
    Recently bought a TM recoil G36k from a nice chap on Prefired for a KSK build , progress so far .
  13. 2 points
    https://www.taiwangun.com/en/electric/cm-093-cyma?from=listing&campaign-id=19 https://www.taiwangun.com/en/electric/cm-093c-cyma?from=listing&campaign-id=19 There are actually many models variants coming out: http://www.020mag.com/revista/mobile/64/page/11?fb_comment_id=2479518658785767_2530913156979650 Most interestingly, there are AEGs available in Asia with engraved markings: http://blog.livedoor.jp/may0522-bellpapa/archives/53001563.html
  14. 2 points
    Another little un. Had this Prime SIS Ultra kit in my projects stash for years, finally got around to gettin Negative Airsoft to build it for me on an old WA Kimber Parts gun I had. Was hardest WA Build he's ever done apparently, partly down to old knackered donor gun and partly down to kit. It loos lovely but design is very poor. Where the SIS is cut into slide the remaining metal is way to thin and infact can me flexed with finger tip. Anyway great job Luke thanks a lot. This one will be a safe queen I think. lol
  15. 2 points
    Got my setup complete, still haven't skrimed with it yet but damn it's satisfying to shoot.
  16. 2 points
    Sprayed the upper on my mk18 build. Can't wait to wear it in some..
  17. 1 point
    Iron Airsoft made a 20DS back in 2013 that I really wanted, but could never even remotely justify paying $700 for. It went into the "want but no way" pile along with CRW's steel Colt Detective Special ($1,550), and QRF's steel Colt Python ($1,650). I'd still like a Rhino, but I don't like WinGun much. I doubt I'd be prepared to pay what it would cost to build one of these to the standard I'd be prepared to buy it at... Which is probably the quintessential airsoft complaint.
  18. 1 point
    Although most stores will probably not send theses outside of Asia, I thought a lot ofpeople may be interested in these: old-school AR15s (XM177, Colt Commando, Mk.18 Mod. 0 and 1, all sorts of 416 and M27 and more). From what I can see, save for a few details, they all have period corect markings and uppers and lowers. For just 170-190 Euros. http://www.bbgunzerker.com/search?q=e%26c
  19. 1 point
    Yes this is massive. Its easy to say 'just get your three games in' which is fine if you are over 18, but it really *fruitcage*ed over younger players, and to be honest I reckon a big % of airsofters back in the day got into it when they started getting thier first paychecks aged 16-17ish. Me and my friends got our airsoft guns aged 13-15 and it peaked at 16-17 before we all went to uni etc. A mate of mine was flipping airsoft guns from zeroin and making a good profit too. Its hard to do that nowadays. My dad would drop us all off at GZ then come collect us at the end. Now i see VERY PATIENT parents waiting in the safe zone ALL DAY for reasons im not exactly sure and it breaks my heart!! If I'm going to rant i think alot of sites have done a shameful job of accomodating younger players - there should be a system where a younger player can 'rent' a gun of thier choice which is owned by, and kept at the site. As for here i've said it before and im not THAT bitter but the main reason this forum is dead is cause sales were restricted, and whilst they are open now i think its just too late. Yes facebook plays a part but AFUK is thriving and zeroin is still the best place for classifieds. VCRA aside I think airsoft in the UK is better then its ever been. So if anyone is thinking about getting back into it i really do reccomend it. Everything is better and for the most part cheaper,there are more sites and importantly way more cool sites... eg portsmouth has ucap bunker (d day tunnels) ucap redemption (former prison) and south coast cqb (former army barracks as seen in bad lad's army).
  20. 1 point
    Maybe he feels burdened with the gift of vision.
  21. 1 point
    I'm not taking a poke at anyone, but it's pretty simple, if you don't come on.. that's one less person. Not saying anyone 'has' to use the site either you gotta do what you gotta do.
  22. 1 point
    2 weeks back I was a overstressed, gibbering, shivering mess. A visit to the doc sat me 2 weeks on my buttocks, at home. Got a LOADS of work done at home, but at my own time. 14 days to sleep in, have a good thinking with coffee, time to read a book, and slowly coming up with solutions. Tomorrow will be first day work after this and I actually look forwards to it. Energized. Makes me smile
  23. 1 point
    But you are a tinkering Jedi, I am a mortal, ham-fisted fool.
  24. 1 point
    Nerpa vest with a condor belt thrown in by the seller. Spent quite some time tonight adjusting it to fit and still having moments of "Why do I eat so much!" Can report that the pouches will hold Bizon mags (came without dividers already so figured might as well test it). Whether or not they come flying out when moving at an angle has yet to be seen. Debating how to go about getting what are likely paintball stains out of it.
  25. 1 point
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.