Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 04/28/2020 in all areas

  1. 7 points
    So... I heard we are on a H&K thread. I have some H&K stuff. KWA gbb fresh from this morning.
  2. 6 points
    Hi, hello mmmmm hi... it's me again.
  3. 5 points
    Good lord that's one long boi. My contribution: maximum P L A I D
  4. 4 points
    SLR B15 now properly suppressed :). Non-suppressed will use an AAC Blast Shield (that's still on back order :()
  5. 4 points
    I was told there would be pestilence... #MakeCuringGreatAgain #Impeach05Council #NotMyPlague
  6. 4 points
    VFC MP5A5 Aeg -Rs stock -Rs body pins -Rs rear sight
  7. 2 points
    New products teased on TM's site - Glock 17 Gen4 GBB (Previously announced last year) - FNX-45 GBB Black version - Ruger LCP GBB (most likely)
  8. 2 points
    Yep, another Glock boring photo.
  9. 2 points
  10. 1 point
    The latest ERG from TM is the AK Storm NGRS. 17/4/20 release The latest NGRS AEG from Tokyo Marui, the AK Storm NGRS, is set for release on the 17th of April... "The next-generation electric gun 'AK Storm', which is a modernized custom made Tokyo Marui Original take on AK47, reveaked! We have produced custom parts that improve operability, such as a short barrel that is easy to handle, a stock that can select the shape according to the situation, and a Magwell that is easy to change magazines, a mount base with a backup site, etc. are adopted in various places. Major features: Equipped with a shoot and recoil engine: When the trigger is pulled, the bolt is activated at the same time as the firing, and the strong recoil generated inside the body is transmitted to the whole body. An auto-stop system that stops firing when the magazine is empty. It is a model that pursues the reality of operation and operability. Bolt release mechanism: Equipped with a bolt release mechanism that releases the auto stop by pulling the bolt handle. You can enjoy realistic operation procedures. (Nice) Metal parts used: Die-casting and press steel are used for the parts of each part, including the lower receiver, to produce a profound feeling that moves to the eyes and a feeling of weight when picked up, and also achieves high rigidity. By applying a defric coat to the lower receiver, the texture of steel black dyeing processing has been reproduced. M-LOK rail system: The latest rail system M-LOK is used on both sides of the hand guard with underrail. The hand guard, which allows you to add rails only where needed, is slim and easy to handle, and has been lightened by removing meat. The M-LOK rail with a width of 20mm (Picatinny standard) comes with one of three types of slots: 3 slots, 5 slots, and 7 slots. It can be easily removed with the attached hexagon wrench. Various accessory parts: Two types of M-LOK covers, two types of hand stops that support the hand holding the hand guard, and a special mount that can be attached at a lower position with the optional “Micro Pro Site” are included. Compatible with various muzzle options: If you remove the muzzle flash hider, you can install a muzzle option with a 14 mm reverse screw specification such as a silencer. Steel Press Magazine: Includes a magazine with 90 shots and a steel press outer case similar to the real one. With a built-in follower stopper, you can enjoy just firing without putting BB bullets in the magazine. * There is no magazine compatibility with the magazine for AK74. Magazine adapter included: By attaching the adapter to the main unit, the magazine for electric gun standard type AK can be used. * When the adapter is installed, the auto stop system and bolt release mechanism do not operate. Also, the magazine for the next-generation electric gun AK47 cannot be used."
  11. 1 point
    My life hasn't changed much either. That isn't inherently bad, it just means that the people I care about are almost all online friends so the way I interact with that hasn't changed. I don't really like people or the outernet so being in the house is fine to me. You seem to have a lot on your mind, look if your boss has made you do a new job with no training that essentially absolves you of any responsibility for mistakes. I find that makes me less stressed. If I mess up, it's their fault for not training me. A fact that can (if necessary) be argued in court. I hope you find something to enjoy, a little something to look forward to. It's out there, don't close your mind to that possibility.
  12. 1 point
    Actually, I'll stick with my H8R Mk2 revolvers with their adjustable hop-up, no shells, quick to load 10 shot "full moon clips", ability to actually be suppressed, and railed for mini-red dot (or scope) and weapon light. I know they dont really exist in real-steel, but they are very very good.
  13. 1 point
    Best info for camo suitable for your own location would be looking at what your armed forces wear at home. Same stuff might be hard/illegal, but it gives you the idea of the colour ratios to look for. Going for some exotic camouflage pattern can, indeed, be a pain with getting the whole set to match, since helmet covers in particular tend to be hard to come by. They are easiest to do yourself, though, if you can get the fabric from somewhere. I'd be a bit more inclined towards the olive drab than coyote, at least unless oyu can see in person how light the coyote actually is, but either should work in your environment, as long as you don't do too large patches of one.
  14. 1 point
    That reminds me. I need to clean up my open tabs.
  15. 1 point
    My GHK uppers. Top: CQBR Bottom: 16" Recce
  16. 1 point
    I've used KJW G17/KP13 pistol magazines in my KJW, WE and TM pistols, so just get some of those and you should be fine.
  17. 1 point
    AC Unity 60 Rounder modded to take GHK internals, got it half price as it has cracked windows. Still work in progress, physically fits but don't dare test fire just yet until alignment is good. Once that's done, will look into expanding BB capacity and potentially even gas if it requires it. (Probably not necessary given default mag already goes through far more than one fill and I'm unlikely going to be able to double capacity. Helped by @Bada Bing's video for general mag mod tips, so thanks for that.
  18. 1 point
    Something appears to be misaligned .. take it apart and reassemble it I'm guessing the leaf spring jams somewhere Wolf
  19. 1 point
    I had one .. Cool slide kit ..Sadly sold it but I kept the Prime/Nova ZEV G17L Wolf
  20. 1 point
    Yes, I bought one. Very nicely made but the outer barrel needs to be opened up inside very slightly if you want to fit a longer inner barrel. 10mm diameter and 10mm more depth will do it I also put in a Guns Modify lightweight blowback chamber to bring the moving mass weight back down a touch.
  21. 1 point
    Desert Eagle. I think the release of their Desert Eagle re-peaked my interest in WE. Before this I had also owned TM Desert Eagles with Creation and Guarder kits. The full length travel of the WE version pushed me into purchasing. Out of the box it is not a bad performer but I knew it could be better. Internals: Aside from a strip and lube with minor tweaks, I replaced the HOP rubber with TM and the inner barrel with a 6.02mm tightbore. This has given me more range than the standard set up. I also cut the recoil springs down to make it less sluggish and improve efficiency (I am using green gas). Externals: On occasion, I felt minor straightening of some lines was necessary (I am super fussy and was getting them Cerakoted anyway). Initially I wasn't that keen on the matt black finish as it almost made the markings look feint but with a wipe and buff using Superlube oil it looks much better in my opinion. I do still have one with a standard black finish. The fit and finish is generally good. Tolerances are fine and on the whole the design seems sound. Better materials and quality control is always preferable but that comes at a price. Yes, sure; it is an impractical, big old clunker and the same can be done in a smaller, more efficient package but I just don't care because I like them. How much? 🤣
  22. 1 point
    Choate stock fitted. MI M-Lok ris WIP. Yes I'm a grown *albatross* man with Dr. Who sheets. No I won't apologise.
  23. 1 point
  24. 1 point
    [emoji41] Sent from my SM-G955F using Tapatalk
  25. 1 point
    Updated my brain bucket with some FMA nonsense.
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.