Jump to content

bjorn

Forum guru
  • Content Count

    1,397
  • Joined

  • Last visited

Everything posted by bjorn

  1. Maybe, but then in my case it would have to had failed.
  2. Well I just checked the manual that came with the ASCU. Quote from it: "The ASCU has an integrated Low Drain Protection, which is specially designed to keep LiPo batteries from damage." There are not a lot of ways you can understand that quote. As I understood it, you do not have to disconnect your Lipo battery because it has Low Drain Protection. There is nowhere in the manual stated that you have to disconnect your battery to prevent it from being completely drained. P.S. still no word from them.
  3. Exactly my point. I had a 11.1V 2000mah lipo, that was half-full just as it has to be. So it should not, in normal conditions, drain the battery in a week.
  4. Here are my final findings with the ASHU hopup chamber. This is extra to the info in the first posts. Since Madbull Blue hopup rubber was in a review test, I had to order it to try and get it to work. That was another 10 euros not very wisely spent. The madbull blue hopup rubber did install okay and looked good but it did not perform any good. 1) It did not feed, not even with Magpul pmags, which have a very strong spring. 2) When it did feed (about 1 in 10 shots) then I got a FPS reading well below the average (about 10-15m/s less or 30-40FPS less). That was it and I have no other tests
  5. Hey, Since I had already previously installed a standard mosfet then comparisson to that it did not. If you had a standard switch assembly and you install the ASCU then yes, probably it will.
  6. +1 to this. As of this moment then only "great and beyond believe performance" products they have shown us are 1) on a picture or 2) as a prototype. Now on the other hand ALL the real products they have produced (ASCU line + ASHU) seem to fail at every step. Since when is a manufacturer rated by hype? And lets be honest - Airsoft Systems IS based on a LOT of hype, specially before the release of the ASCU Gen3. Well we fixed that, didn´t we? P.S. Wasn´t it so that a whole lot of units (ASAR) inside Bulgaria were supposed to be sent out to test users already last year and they are stil
  7. Well just as I predicted I am not the only one with loads of problems with this unit. I checked out Airsoft Systems Facebook page and there are tons of people already now posting different problems on there. Since I still haven´t got a reply from Airsoft Systems, I decided to post the videos with descriptions to their FB page as well. Maybe it will speed things up a bit. Airsoft Systems FB page: https://www.facebook.com/pages/Airsoft-Systems/150377941783808
  8. Background: I have been wanting for an advanced mosfet trigger unit for my Lonex M4 for a long time now. I always tought that they were overpriced and not good enough. After I saw Airsoft Systems Gen3 ASCU and ASHU combo (trigger unit and hopup with "empty mag" function) I knew that this was something I wanted. That is maximum realism and PTW like AEG. The price was steep though - 85 EUR for the ASCU and 30 eur for the ASHU. I explained myself that I needed it and so I ordered it via a local dealer who inturn got it from the official dealer www.gunfire.pl The review: First up the package. Wh
  9. Why M120 instead on M100? Well the answer is the same as why a VSR rifle should have a 150m/s upgrade instead of a 120m/s one. A little bit of extra range and extra speed. However I ofcourse agree that a big failure rate is not worth it. That is why I asked about the shells braking. Bjorn
  10. I have tried sorbos. Please be more specific - do you mean that in general gearbox shells break or THESE (M4 EBB) shells break in winter time? Because ver.3 gearboxes hold up rahter fine in harsh environments. B.
  11. Without reading the whole 130 pages can anyone confirm if this version gearbox can hold a 400fps tuneup fine in minus Celsius in the winter as well? Regular Ver.2 gearboxes go like sandwitches even at 328FPS when played under 0C. Anyone heard of these broken as well? Bjorn
  12. bjorn

    DMRs

    Actually it depends of the viewpoint. If I remember correctly the UK forces in Afghanistan are using a .308 bolt action as a squad marksman rifle. So I guess it could go? Depends on the doctrine. Also - in airsoft you are usually doing a DM job with a bolt action rifle. Bjorn
  13. LOL after all those James videos promising absolutely top notch stuff? Do they even do ANY quality testing before releasing a new rifle? B.
  14. Nope I´ve had my own for quite a few years now, but my friend had your VSR at the same game as well and we rocked! B.
  15. Waiting.... Running for the last kill of the session: Moving out of OP: Bjorn
  16. I dont own the rifle anymore but I can say this. After a few months of use the plastic body start giving away. It doesnt break, but it start to squeak a lot. Pretty annoying really. Also the hopup rubber didnt survive for very long. At the time it was a great choise. Now you have lots of newcomers like Well VSR and SR series rifles, JG VSR series, Snow Wolf M24-s etc. Bjorn
  17. Learn to use iron sights? B.
  18. Placed an order with them about a week ago for a G&P IR laser. Price was good and they were the only ones that had it in stock. A week later after asking for a tracking number I got a reply that they actually do not have the item in stock and could not get it from the manufacturer. Do not recomment them much. Bjorn
  19. I have to agree with UsPeaceKeeper. A bit too "standard". But hey - atleast the forums are up again, thank god. Now I can have my life back. Best regards to Arnies and CO B.
  20. Did you also try shimming the lowest gear up or down a bit? It might be that the height is correct more or so but since the shimming is a bit off a 100% perfect mesh can not be achieved. Bjorn
  21. What gears are you using? Might be just a bit interaction between the gears and the motor pinion gear? Have you tried the motor in another AEG as well? Bjorn
  22. bjorn

    $1K club.

    Noveske: When do you get bored? Or is this the results of boredom? B.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.