Jump to content

sacairsoftsn00py

Forum guru
 View Profile  See their activity

  • Content Count

    1,344

  • Joined

  • Last visited

  • Days Won

    11

 Content Type 

Everything posted by sacairsoftsn00py

  1. sacairsoftsn00py
    Very nice. I may have to pick some up for one of my GHK AK's. Sent from my iPad using Tapatalk
  2. sacairsoftsn00py
    It lasted for a while when the mags were new. I just relube the gaskets with silicone grease. Sent from my iPad using Tapatalk
  3. sacairsoftsn00py
    Nice kunlun I sold one of mine a whiles back. Dude is still rockin it with the azimuth nozzle. ..gun fires well. I did mod the firing pin so full auto firing went poof on that one. My other mp7 with the ready fighter nozzle is also in tact.i have a couple of spare tm mp7 oem nozzles on hand. I have been running it with duster 152/134a gas however. I got tired with having to re-seal the mags running propane in it. 134a has adequate pressure to run the gun. Sent from my SGH-M919 using Tapatalk
  4. sacairsoftsn00py
    Thought about it. I think the hinge joint will keep it from allowing for full adjustment. Otherwise, it should work. I may try it on mine. Sent from my SGH-M919 using Tapatalk
  5. sacairsoftsn00py
    Of topic. Eta on the ghk m4? I have the m4 Ras 10.5 on pre order... paid for. .. Just waiting to have shipping confirmation. Sent from my SGH-M919 using Tapatalk
  6. sacairsoftsn00py
    A bit off topic.... For those in the US who live where it gets super warm/hot, you guys might want to use 134a gas. Duster gas is normally 152a. Those air horn refill canisters that I have come across are tetrafluoroethane. All you need is am adapter for it. Where do you get an adapter? If you guys used green gas from a couple of years back that had detachable tips...then you've seen it. With 134a, im getting 250-60 fps with .20g bbs. Oddly enough, .25g bbs seem to slightly overhop some. No biggie. No swollen gas tank for me. Sent from my SGH-M919 usin
  7. sacairsoftsn00py
    Todays haul. Thanks to the UPS guy and USPS chap. Had a chance to pop a few shots out of the m870. If I rack the shotty with the barrel pointing up, I sometimes pop out 5 rounds instead of 6. Racking the gun horizontally, I pop out 6 rounds...as it should. I'll play around with it more when I have more time. Sent from my SGH-M919 using Tapatalk
  8. sacairsoftsn00py
    Since echigoya was having problems with the 870 getting through the California Customs...I went ahead and ordered elsewhere. Ehobbyasia got it through via UPS. Package had this note stuck to it. Sent from my SGH-M919 using Tapatalk
  9. sacairsoftsn00py
    Got to field mine for about 10 mins. Started recording midway through. Same deal as before. 390+ fps with .20g bbs. 335+ fps with .28g bbs. 7.4v 1200mah 25c lipo. Sent from my SGH-M919 using Tapatalk
  10. sacairsoftsn00py
    Where'd you get one of these puppies? Sent from my iPad using Tapatalk
  11. sacairsoftsn00py
    Same setup as before with the exception of a chopped Systema m120 spring. Rof was at about 12.3 on a fully charged 7.4v 1200mah 25C lipo. Trigger response slowed down some, but is still fairly snappy considering that I am now shooting 396-401 fps with .20g bbs. Sent from my iPad using Tapatalk
  12. sacairsoftsn00py
    No BTC Spectre in mine...yet. Guarder Infinity Torque Motor. Thats what im running. Makes a big difference Sent from my SGH-M919 using Tapatalk
  13. sacairsoftsn00py
    Nice! I just heard back from echigoya... supposedly, they are having issues with California customs not letting shipments of the m870 in. Annoying. I may just leave it as it is with the 1200 mah battery. Fitting it over on one side means my cheek is welded over onto the side where the connectors are housed....away from the cells...just in case. I will look into it though. Thanks for your input richard Sent from my SGH-M919 using Tapatalk
  14. sacairsoftsn00py
    My TM 416. Funny how microphones pick up sounds you don't hear in person. Yes, I did drop my gun on its suppressor. Lol Currently shooting 347-352 fps with Javelin .20g bbs. Hop is set for AEX .25g bbs. Shoots 295-300 fps with AEX .28g BBs. With the said .25g bbs, it shoots 310-315. ROF is at 12.5 RPS. Not the best but adequate to shoot back with. Sent from my iPad using Tapatalk
  15. sacairsoftsn00py
    Low battery maybe? The gears turning over sounds on the slower side to me....hmmm Sent from my SGH-M919 using Tapatalk
  16. sacairsoftsn00py
    Fps? '> Not exactly a recoil shock m4...but I want one of those in it...see how much better it gets. Im running a 7.4v 1800mah 35c in the gun. Sent from my SGH-M919 using Tapatalk
  17. sacairsoftsn00py
    What battery are you using and whats your gearbox setup like? Sent from my SGH-M919 using Tapatalk
  18. sacairsoftsn00py
    Ordered my second m870 just cause of that. sold my first one to a buddy last December for cheap. Yay for a shorter stock, pistol grip, and a new tank that uses actual o-rings. Hopefully this one shoots 6 bbs instead of 5 this time around. Lol
  19. sacairsoftsn00py
    Are you keeping yours stock? Using 8.4v sopmod batteries? Sent from my iPad using Tapatalk
  20. sacairsoftsn00py
    What batteries are you guys using to run the kobayashi motor? Sent from my iPad using Tapatalk
  21. sacairsoftsn00py
    Do note that the outer barrel wobbles most when the handguard is off. With the hand guard on, barrel wobble is significantly reduced. Sent from my iPad using Tapatalk
  22. sacairsoftsn00py
    If you are using the guarder infinite motor with the stock gear set..the gun will sound smooth. You will have to adjust the set screw at the bottom of the grip. No experience with the gold terminals. I may attempt to install a basic MOSFET into the 416 some time...less I opt for the btc specter. Sent from my iPad using Tapatalk
  23. sacairsoftsn00py
    You may need to replace the o-ring. That happened to my ak mags. You'll need to find the right size orings for it. Sent from my SGH-M919 using Tapatalk
  24. sacairsoftsn00py
    Mine The kobayashi torque motor is our of stock. I've tried a few motors including the guarder infinite motor, marui eg3000 high cycle motor, tienly 30000 motor, and g&p m170 devil jet motor. The g&p motor is awesome with the 7.4v lipos that I use. Next is the guarder. Those two don't suck up the battery much. They improve the trigger response significantly. If your velocity is limited there. ..or are limited to semi auto fitter only. ..look into the guarder infinite motor as is the most cost effective improvement performance wise. Sent from my SGH-M919 usi
  25. sacairsoftsn00py
    Clean your barrel/hop. That usually helps with hopping bbs. Sent from my SGH-M919 using Tapatalk
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.

  I accept