planeman
-
Content Count
179 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by planeman
-
Have you ever had this problem with the shells jamming when pumping the shotgun? It seems to jam on mine when pumping slow or fast.
-
I was trying to remove the fore-end tube assembly but you don't have to remove the bolt when removing the barrel assembly
-
I got the bolt out but I had to take out this part out via removing the trigger group. Did anyone get the bolt out without removing that part?
-
I am stuck of getting the bolt out. Any ideas of getting the front assembly off as it gets stuck at the forend tube assembly
-
I got my shorty from Evike and is not MAP controlled so i got a 21% discount. Only things that sucks is that I scratched the outer barrel from removing the orange tip and that the manual does not give you information of how you load the co2 into the shells.
-
Has anyone who has the AngryGun power up silencer have any problems with the part holding the silencer to the flash hider. Mine seems to come loose when firing with or without bb's in single shot.
-
I just got the AngryGun Power Up Silencer and it does not increase the fps (its stays around 380). Any ideas of to get it to work as I have to remove a screw in order to remove the silencer. Edit: Never mind got it to work
-
That sucks about the sling loop cutout. I got rid of the sling loop on mine and filled it with JB Weld since the real MP5K did not have one (although some MP5K has them). It seems like guns workshop has a custom steel outer barrel with the cutout https://www.facebook.com/gws.custom
-
Asian Edition = No long/lame warning paragraph on the side of the gun. Have any of you bought the AngryGun Power Up Silencer and is wondering if its not front heavy.
-
Looks like VFC is releasing a PDW conversion kit for the MP5K https://www.facebook.com/photo.php?fbid=314411178717357&set=a.108427199315757.18932.100004454315497&type=1&relevant_count=1
-
Where did you get the mag clamp. I looked at HKparts but they are expensive and robertrtg had a used one but are sold out.
-
I got the side rail set and the weight had gone up to 1.9 kg with magazine. Wondering if the data from the MP7 operator's manual is based on with or without side rails.
-
Has anyone tried a RS double magazine clamp? Wondering if it fits as it cost $50 dollars for a used one.
-
I am having the same problems you were having on my MP5K. Wondering if I can add a RS hammer spring or is that too much?
-
Canon 100mm f2.8L IS Macro shot of VFC M&P9 magazine base plate Smith & Wesson lettering. No crop just resize.
-
The hex screw for the rear sight is bigger on the VFC, so I guess you need to make the hole bigger on the RS rear sight so it can work on the VFC. I read it is a *badgeress* to remove the set screw on the RS rear sight though.
-
Maybe but the problem is the hammer assembly is inside where the tab of the backstrap is supposed to go in on the VFC
-
Just got my M&P 9. Here are some comparison shot with my RS M&P 40. Unfortunately the RS back straps wont fit in the VFC due to the fact the tabs are different and the hammer assembly gets in the way.
-
I guess it one of those newer finishes as mine is like a grey like finish. At first I did not like the color but now I like it.
-
I weighted my loaded 10 rnd RS Glock 23 and came up with 836g. Does you steel slide leave fingerprint marks as my RS does?
-
RS frame is 198g
-
Mine also came with one bolt guide. If you look at the part list for the MP5K it shows one bolt guide. But the tab holding the bolt guide broke off but it is still working. The only problem that I have with mine is that when firing the first shot it is weak but on the second shot is is normal.
-
How about a non pistol, my MGC (Model Gun Corporation) Beretta M12
-
Nice photos of the Officer. Would of been better if it had been a M1991A1 Compact which was the actual gun used in the movie HEAT
-
I have a ProG4 G17 and G18C slide on my KSC's and were a drop in fit. WE and KJW mags are compatible with the VFC.
