1cem4n

my gun is over 1k but my Bipod is REALLY ugly so i dont' know if i want to buy a new one. some *beep* spraypainted mine without my permission. will paint thinner get it off?

I know that the G&P SR25, and ONLY the G&P one, uses a different long gearbox. nothing like a PSG-1 though. I'm pretty sure you're SOL on aftermarket parts besides the G&P Specific SR-25 ones. I wouldn't trust any spring over 400fps with it but since you're in the UK, 328 is the max anyway? I'm pretty sure the Hop Up unit is the same as a regular m16. The hop up bucking should be replaced because mine tore really fast and i never had a jam. EDIT: nice counter-sniper Hammer. what type of bipod is that? i've never seen it before. the m16 with m203 looks really weird tho

In my opinion, and the rest of my team, the G&G guns are horrible. One of our DMs got a G&G M14. Now the story begins in June where I ordered it from War4Toys. We got it in the Black Fiber stock and although I never personally fired it stock, it sounded like a rubber band when firing (ka-thwoing). He had it for 2 months, fired only 20 rounds through it and sold it to another guy I knew. Now he quickly changed it to a wood stock and he upgraded it to 415 FPS. He upgraded every internal part and he rarely used the gun either. He only bought it so he could try and

Well I'll post some pics of my P226, just got it back from my dad. lol, anyways. I have my 2 extra mags with it and My new parts are coming in tomorrow and the Dyna-Piston and POM Piston head will show up within the week.

well i made a poll to help my decision. http://www.arniesairsoft.co.uk/forums/inde...ST&f=57&t=85163 I would really love some suggestions on what I should buy. I don't mind the heat as it does get quite a bit cold where I live.

who has an MAV with the X-harness? does it move around a lot when you run?

one question, should i get the TT MAV 1piece with X Harness or a Eagle Industries Plate Carrier with Cummerbund? Any good Multicam pictues and I want to be light, meaning just two "accesory" pouches and 4 M4 Double Pouches. I want to see what would justify the extra 100 dollars for the plate carrier.

he just dropped it off at my house. i had to reassemble it too, it was all in separate pieces

no, i'm using the masking tape right now because i'm going to spray paint the stock, the rail covers and the pistol grip soon, a nice tan. some jackass stole my bipod and spraypainted it desert and used it for a weekend and then returned it to me at my front door. i was so ###### about that. and the mags, it doesn't matter to me but these were cheaper from my sponsor. I usually cover them with grip tape on the bottom anyways. I'll post up another picture of an older picture of it. I still have the silencer but it's getting a camo netting makeover right now. and I still hadn't bought

my G&P SPR/A with one TM VN mag in it and 8 MAG HK mags next to it. I need to get spraypaint and I have to get another picture with it and my silencer.

i've got a quick question on high flow valves. some people say they're good and some say they're bad. i was talking to onslaught before and he said he got 1.5 mags out of his mag with green gas and it was using a KM High flow valve but he said the Nineball ones are better. I was at AEX asking about them but the owner said they were next to useless. anybody have some opinions? i want some people with p226's opinions.

anybody know if there are any replacement sights? better ones maybe? that i can put on my p226?

does it come with the spring or do i have to demolish my loading nole?

augh.... wgcshop just ran out of stock when my friend went to order for me. so i am going to order from unco with a POM loading nozzle. what are all the extra white pieces for?

i guess i'll be the first one to get it. i'm ordering right now.

can anybody find a review of the Dyna Piston? I don't know if I can justify a 25 dollar purchase vs a 7 dollar one. i've found some people WANTING it from airsoftcanada but nothing else.

anybody try out the new dyna piston from Nineball? Maybe I'll get it.

my parents took my p226 away for a week because i shot it and it ricocheted off the light switch (turned off the garage lights), hit the wall behind me, ricocheted off the back of my head and embedded itself in one of my mom's vegetable/fruit. no installing my p226 parts this week....

well I have some parts coming in next week from WGCshop. I have a PDI Piston head, a Guarder Enchanced Loading Nozzle, a RCC 130% recoil spring, and a Guarder Silver Outer Barrel. I'll also pick up a new polishing head for my dremel and I can polish the little bits. I still need to file down the trigger to get it to fit absolutely perfect without rubbing on the Guarder Metal Body. After that, I will post up pictures.

I think the USMC reciever is awesome. I have the G&P SPR/A and the reciever is the envy of all my friends with the CA M15A4 (basically my entire team). I'll post up pictures of my gun all updated soon.

i know i'm going to regret getting the guarder one after seeing all these PGC kits. Anybody know if i should just stuck with using a dremel and a cloth pad to polish or should i use something else?

does anybody have a definite guide to installing those lovely hogue grips besides "use a dremel"? I will give out +1s to anybody who does. And when you can't buy a Guarder P226 Kit from Airsoft Extreme anymore, that's probably me on my 3rd one (So many manufacturering defects). I installed my first one and then i realized the slide was cracked down the middle. The second one had no threads on the leftside(where you screw in the grips), and now I'm on the third one (Wish me luck). I can install it all by myself but it's such a pain to keep going back and getting a new one.

i hate you onslaught... i want your gun..... meow. I need to post pics of mine. got a shipment coming in from WGC

i dont' know if I really want a silencer. i mean, they look AWESOME but is it worth the money (i'm strapped for cash right now so yeah...) i need to get a tap to put in threads in the left hand side grip ....