Jump to content

jal3

Regular Poster
  • Content Count

    937
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by jal3

  1. jal3

    AR15 Variants and Derivitives Picture Thread

    I think you should chrono your gas rifle instead of guessing. I've seen WE rifles straight up doubling energy from 0,20 to 0,40. And double again from 0,40 to 0,87.... Then again, it's more the sites fault than yours. This is what they get when they chrono with 0,20 rather than the BB weight used. Maybe some more abuse is good, it might initiate some changes in how brit sites chrono.
  2. jal3

    AR15 Variants and Derivitives Picture Thread

    Try chronoing it with those 0,40's, maybe there's a good reason you feel guilty...
  3. jal3

    Videos Thread !

    I don't think those sites/players are the "rules" type. Check out his other vids. He's very, very odd.
  4. jal3

    Videos Thread !

    GET DAAAOOWN!!
  5. jal3

    Videos Thread !

    Mouthwatering flanks :0
  6. jal3

    Videos Thread !

    Put boobs on the playlist pic.
  7. jal3

    PTW clones( DTW A&K etc)

    If you feel adventureous, try install an ASCU into it
  8. jal3

    Magpul PTS PDR-C

    Wouldn't it be easier to just write the actual ROF.
  9. jal3

    PTW clones( DTW A&K etc)

    TM is respected because they have good QA. It goes a bit deeper than just comparing two products.
  10. jal3

    PTW clones( DTW A&K etc)

    The problem is not just that the price-to-quality ratio is horrible, they're actually quite *suitcase* out of box. Faulty motors, horrible shimjob, botched hopup, breaking receiver etc. There's people here who pay(paid) 1500-2000£ or more for AEG's too. There's people who will throw any kind of money at something if they think it's good, even though you can only throw so much money at parts before it's just pure extra. When people pay that much for the product, they pay for the skill put into it, not the parts themselves. Considering the bad QA on PTW's, you can't really justify the price that way.
  11. jal3

    PTW clones( DTW A&K etc)

    The problem with PTW is that they're quiten often faulty and parts cost a fortune. Local warranty is nil, because the local prices are too high. With DTW and DTW parts, you get the same functionality at a price much lower. It's a lot more fun to toy around with it when a complete gearbox costs 50£ and all the parts are available for individual purchase.
  12. jal3

    What music are you currently listening to?

    One of those old thrash gems...
  13. jal3

    Videos Thread !

    I'm so hungry now. You know, we can't actually get bacon like that here :S What you call "danish bacon", we call "english bacon".
  14. jal3

    Videos Thread !

    Tournament paintball
  15. jal3

    Videos Thread !

    You got outplayed fair and square. Winning on a rule technicality isn't "milsim mindset", it's paintball attitude. It destroys airsoft.
  16. jal3

    Videos Thread !

    1:15 Did you just turn around and shoot a player who called you out? From 1 meter away. With your back to him. While you were Reloading your pistol. ?
  17. jal3

    DMRs

    I like it. The stock and the handguard goes well together.
  18. jal3

    Inokatsu M1911A1 Standard Edition

    What material is the nozzle made from, and is there any significant wear on the hopup rubber?
  19. jal3

    DMRs

    No, you (or others for that matter) did not indicate that in your posts. You talk about going from 15c to 25c. C rating means little to us airsofters. It's a complicated thing about standardized testing for the manufacturer. When determining the product during their R&D, they use some different ideas than airsofters do. You get back the A discharge rating by multiplieing the Capacity in ampere with the C number. The C is short for Capacity. 25C is 25 * C, or 25 * 2 in case of a 25C 2000mAh battery. You can write 7,4v 2000mAh 25C or you can write 7,4v 50A, but you can't write 7,4v 25C. 25 times Capacity only works if the capacity is also stated.
  20. jal3

    DMRs

    C is not a discharge unit. Discharge rating is measured in A. 12, 15, 25c etc alone is meaningless. Your common 1500mAh stocktube battery is rated for 35A+ burst discharges (which all airsoft discharges are). A normal 400fps 30rps rifle draws 20-25A. If you cannot pull a 440fps DMR, don't change the battery as a solution (altough it's the easiest) :<
  21. jal3

    DMRs

    Let me summarize the thread and repeat it for you very clearly. A: There is no such thing as velocity determing range. There is only energy (joule) and BB weight (air drag). B: Energy is derived by calculating velocity and weight together. C: It does not matter what accelerates the BB up to a given energy. D: 4,2J is the equivalent of a M210 AEG. It is VERY rare to see an AEG performing to it's 210m/s rating with a 0,40 and hopup dialed as such. If you compare your rifle with another persons AEG, both rifles must shoot EXACTLY the same. That is, both rifles must shoot 145m/s with a 0,40 and the hopup set. Otherwise, it's a wrong comparison. If you do not understand this, just memorize it.
  22. jal3

    DMRs

    We can only judge you from what you write. Let me summarize the thread and repeat it for you very clearly. A: There is no such thing as velocity determing range. There is only energy (joule) and BB weight (air drag). B: Energy is derived by calculating velocity and weight together. C: It does not matter what accelerates the BB up to a given energy. D: 4,2J is the equivalent of a M210 AEG. It is VERY rare to see an AEG performing to it's 210m/s rating with a 0,40 and hopup dialed as such. If you compare your rifle with another persons AEG, both rifles must shoot EXACTLY the same. That is, both rifles must shoot 145m/s with a 0,40 and the hopup set. Otherwise, it's a wrong comparison. If you do not understand this, just memorize it. Here's some charts. Bitches love charts. These are NOT EFFECTIVE RANGES. It is merely energy loss to air drag ratio information. However, this is the main factor in why a heavy BB shoots further. The graphs may not show it clearly, but the difference should be noted in relation to Y axis 0, not each other. At 4,2 joule, we should be shooting 0,87 steel bearings for the longest range. It's unpopular for other reasons though
  23. jal3

    DMRs

    A general term for how long time a poppet valve is open. The time unit usually indicates how long time the solenoid that controls it is energized, not the actual time open.
  24. jal3

    DMRs

    Well it's hard to be short on that subject and still be constructive. Educating them on joule rules is incredibly hard. Field owners tend to be very stubborn. --- Brainteaser: One could also argue that a polarstar is LESS efficient with a lighter BB than AEG's are...
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.