msx361
-
Content Count
3,136 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by msx361
-
-
Still to use either primary in the field yet
-
2
-
-
So Celcius or G&D?
-
Good effort!
-
Hi guys looking for a little bit of help. I picked up a second hand KWA mp7 the other week and when i stripped it down to clean it up, the ali piston head had loads of dents and scratches all over the top of it and the npas looks like some one has been hitting the end with a hammer and deformed it a bit. It all still works, but my question is, is that meant to happen with use or has who ever fitted it made a complete hash of it?
Also as its a picture thread here is my mp7 as it stands.
-
The fittings that came with mine were; Helmet clamp and molle. The ones in the accessories kit are arc adaptor and ris adaptor.
-
I had to buy mine separately.
-
Here's my mich 2001, finally finished and modelled by the lovely Tina
-
That it's a faithful recreation anyway lol.
That was meant to say 'Not that its a faithful recreation any way'.
Thanks guys type one it is and squad 701 im pm'ing you
-
I see, thanks for going over it again for me. So for my sig above any firing pin i can get hold will do, it wont be glaringly obvious that its the wrong type for non-railed model. That it's a faithful recreation anyway lol.
-
Yeah i was pev'd about the markings too, how did they f that up?! I might see if i can just remove that part, rather then spraying the whole thing.
Yeah, dremel too. Then i got the mbk, and didnt need to do it
Meh, feels great and looks good to so im not that bothered i wasted all that time lol. Just got the Trijicon (replica) glow sights too, better then the glow in the dark ones i had. Just want that firing pin to finish it off now, any ideas which to get? -
Sorry, just to go over this firing pin business again. The type 1 is for non prime MBK and type 2 it just for Prime MBK. Do they both look the same once installed? I want to get one for my sig as its nearly finished now, im just so short on cash i dont want to have to buy it twice. Thanks.
Oh an pics for the pic thread.
-
4
-
-
Ha that's Aaron all over, my mag came back with sand in the gas reservoir
I hold my hands up to the butchering that was done to that kit. But it just wouldnt cycle correctly and i got fed up with the softly softly approach so i just dremelled it. He said he was never going to sell it and he didnt mind what i did to it as long as it worked and looked good from the out side. We talked about either trimming the mount or the lower and decided that the mount would have a better resale value and a wider market, so trimmed the lower (not that he was going to ever sell it). I might have the other two screws for the sf mount, but they dont reach the plate to tighten.
I feel a bit guilty that ive ruined that kit for you with out the p114 bro
-
Grab Team at longmoor.
-
Hi guys, im trying to find some innert or replica 40mm grenades, more speciffically m433. Ive looked all over the internet and have found a few autions that ended years ago and a site or two that will only post state side. Is anyone in the know of where these can be bought from. I want them for a bandolier for show and dont really want to have to buy a load of airsoft one as that will be very expensive! Thanks guys.
-
Well that answers that question as to if the guarder kit fits the p114. Will save a team mate money on a PGC lol.
-
Just messing around a little. Picture taken at longmoor of the team.
Close up on news cast.
-
A few from longmoor this last weekend.
-
Hmmm RCC make the other internal bit im after, il see any where has the other springs in stock. Am i right in thinking that the 70% one is weaker then the stock spring? The 150% works but the slide wont lock back on empty mags, but with stock spring the hammer gets stock on the bbu some times.
-
Hi guys, first off thanks for the advice on which mbk to go for, i went with PGC in the end. It took a while to find one in stock but i finally did and it arrived to day! Im so happy with it so far. It took a bit of fitting but nothing compared to a guarder kit i had, for a start this one works! The SF fit on like a glove too, the only problem being is that you cant unlock the slide with it on, the dremel will have to come out soon i think lol.
Sorry for the poor pictures but there is no light any where in this flat
Just a few internal upgrades and mag upgrades to do and then she's done. Just out of curiosity do they make a spring that is 120/130% or is it just 150 or stock? Thanks again.
-
lol sounds about right. Thanks for the clarification pal.
Oh and thanks Ezek_GrayFox
-
I wouldnt ask or expect you to either. The us flag is probably what lead me to believe it was mixed. I know that there is sas in that pic but i thought black group or whatever they were called were an international group, but in that photo were us and sas. I guess we will never know as none of us were there
-
I was under the impression it was joint task force uk/us? If not then im sry to offend you guys, ive obviously made a mistake as a ref picture showing sf mixing camo. Maybe its just the sas that do then and not the us sf as no one has a picture of it. Same with rrv and 1911, il take your expert advice
Thanks again for your input. -
Well i didnt really state a unit i was going for, its just bits pulled from lots of different pics for a generic impression.
This is one of them.
I had ciras and didnt get on with it, it was too big and a bit stiff for me (giggidy) even with out plates. The RRV does its job better for me and its more comfortable to wear.
Oh and after spending silly amounts of money making a kimber warrior before the chinese im going to wear it with as many load outs i can get away with
Thanks for the input though.
-
SF impression. The camo base is going to be the base for a seal load out but different vest and gear ect.
SIG Picture Thread
in Weapons
Posted
Just picked up a WE p228. I have to say i am impressed, i wasnt expecting much but they have upped their game. Just need some better grips and maybe get the slide engraved.