Jump to content

christhesecond

Forum Regular
  • Content Count

    621
  • Joined

  • Last visited

Everything posted by christhesecond

  1. christhesecond

    Initial Impressions of the TM SOPMOD M4 AEG

    Praying for other solutions! Lol
  2. christhesecond

    Initial Impressions of the TM SOPMOD M4 AEG

    After upgrading the spring in my 416D, I went to take the upper off the lower to change the inner barrel and the front body pin is stuck firm. It bushes about 1mm then does not move. I've put as much force into it as I'm willing to without risking breaking the receiver. I've tried pushing the receivers together, pulling them apart etc etc but it just won't budge. Anyone else had this problem/have a solution?
  3. christhesecond

    Eagle6 Airsoft - Retail

    Have you tried ringing them?
  4. christhesecond

    Tokyo Marui HK416D

    No problems with mine either.
  5. christhesecond

    Tokyo Marui HK416D

    Can anyone recommend a motor with a bit more torque? I'm running a 25c 7.4 lipo currently and I'd like to up the rpm slightly without going to an 11.1. My plan was to wait for one of these spectre MOSFET thingys, shove an 11.1 in and use the fet to turn the rpm down to a reliable figure. Sadly it looks like I'll be waiting a few years yet for that. :s
  6. christhesecond

    Tokyo Marui HK416D

    Agreed
  7. christhesecond

    Tokyo Marui HK416D

    Definitely remove the stupidly high resistance *suitcase* in the stock. It's a fix for a non existent problem IMO. Personally I wouldn't touch the barrel or hop as I did and initially I thought it was better but now I've realised that was a bit of a placebo. I upgraded to an eagle6 m100 which it found does make a huge difference. The extra 45 fps makes a big difference.
  8. christhesecond

    Tokyo Marui HK416D

    TM 417 set to 400 on semi would be epic!
  9. christhesecond

    Tokyo Marui HK416D

    Nice one. I deans modded mine too and the rof increase was surprising. Got a link the the 2300 lipo you're using mate?
  10. christhesecond

    KWA LM4 PTR GBB

    No it doesn't. It says it clamps on to the barrel but so I assume that means the existing one.
  11. christhesecond

    KWA LM4 PTR GBB

    Quick question for you guys: http://www.gggaz.com/ar-15-free-float-tactical-forearm.html Would that fit a ptr without mods?
  12. christhesecond

    Initial Impressions of the TM SOPMOD M4 AEG

    Upgraded my Tm 416 with a new spring to 345 Fps. All is working perfectly. I went to change my hop rubber today but the front receiver pin won't budge. Anyone else had this problem?
  13. christhesecond

    Tokyo Marui HK416D

    Mine, when bone stock, I was hitting a man sized target 8/10 shots at a measured 163ft (using 0.25s). The range beyond that wasn't much though. A tightbore and firefly hop bits have improved that slightly.
  14. christhesecond

    Tokyo Marui HK416D

    From what I've read it's pretty similar. I've yet to try it yet but I have changed the inner barrel and hop bucking/nub and there are the 3 plastic spacers on the outside of the gearbox and for te hop up to deal with although that is extremely simple. My understanding is that everything else inside is the same apart from the ambi selector gear which is also very simple. This has some info: http://www.airsoftcommunity.it/recensioni/asg/28-marui/1113-tokyo-marui-h-k-416d
  15. christhesecond

    Tokyo Marui HK416D

    Fitted firefly hop rubber and nub. Gave me 20 Fps and noticeably improved range and accuracy
  16. christhesecond

    Tokyo Marui HK416D

    Fire support have both.
  17. christhesecond

    Tokyo Marui HK416D

    Chronod mine today at circa 285 with a Prometheus tb and hop set for 0.25s. Got the firefly hop bits coming so will fit those and retest power/range/accuracy then ill fit an eagle6 m100 and rewire at the rear. Currently getting 13rps with a 7.4v 25c lipo. With a stronger spring but then wiring with less resistance I imagine ill get around the same maybe a touch higher. Anyone know if the buffer tube cap can be unscrewed easily or does it need that tool on echigoya?
  18. christhesecond

    Initial Impressions of the TM SOPMOD M4 AEG

    :'( I assume magpul has yet to bother with emags?
  19. christhesecond

    Initial Impressions of the TM SOPMOD M4 AEG

    I can't find the emags on your website Richard. Only Pmags.
  20. christhesecond

    Tokyo Marui HK416D

  21. christhesecond

    Tokyo Marui HK416D

    Got mine today. Initial thoughts are really positive. Need to get hold of a chrono to test fps and rof but range and accuracy are marginally better than the tm m14 I bought long ago. Only disappointing thing so far is the gap between the front end and the receiver.
  22. christhesecond

    Tokyo Marui HK416D

    Great info thanks. I'm picking my 416 and lipo etc up tomorrow and I have a 7.4v 1300 25c for it so without removing the fuse or other contacts I should expect about 14rps I would have thought. 309 fps is great. Is that stock tm? Hope mine is like that as I've to a tightbore ready for it which should bring it near to 320 which is great for now.
  23. christhesecond

    Tokyo Marui HK416D

    Do you have a chrono that measures the rof mate?
  24. christhesecond

    Tokyo Marui HK416D

    Fire support are out of stock now but airsoft world have some left at £535. Importing from hk would be around the same after tax and shipping etc. Richard, what internal mods would you suggest to get these firing to around 340. I've got a promy tightbore and was thinking, nozzle, pistonhead and one of your m90 springs.
  25. christhesecond

    Tokyo Marui HK416D

    Of course not mate. Not saying you should.
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.