FUmiYAsu
-
Content Count
873 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by FUmiYAsu
-
-
No, the gas doesn't leak out, nothing happens. You pull the trigger, but the hammer won't drop, because the trigger bar has been seperated from the sear by the disconnecter. Once the slide returns to its normal position, ie after you remove it from whoever's neck it was in, you can fire as normal. No loss of gas, no nothing. The problem is in that specific moment you want to be shooting, your gun is useless.
So it would work even if it doesn't have the spikes?
-
The idea springs from close protection work, where you might be pressed right up against someone and need to shoot them.
Cheers.
still don't quite get it... so I presume you can't do tht with a normal pistol as the hot gas from the bullet won't vent?
-
Actually... if we were to start a new section... would we have enough posts to fill it? We can have the picture thread, a few more about different accessories and maybe a few more about new real steel m14 stuff.. but tht's pretty much it...
-
We are a team. You know we have team games.
Also patches and alot of us know each other.
Edit: I've seen m14s with PEQs attached to RAS rails.
Are there patches? Why don't I have one...?
As for team forum, i've been suggesting it for ages... It would be a bit like Ar15.com where they have the M1a section... and if it is happening.. I would volunteer to be a mod..
LeMongelo: Does my "custom" flashhider count as custom?
I am actually quite amazed tht there still isn't a M1a scout flashhider in the market... this was supposed to be a temporary thing before I can buy one...
PS: I know it's not quite 100% accurate to the springfield one as the real one have holes on the top. But there are probably some other M1a flashhiders tht looks like mine...
-
love the tiny scope where did you egt i want 1 for my mac 11 project and mabey i 'll egt an mp7
It's a reflex sight, ATN ultra compact.
http://www.atncorp.com/DayOptics/ReflexSig...tDigitalCompact
-
My new MP7 and some of my other guns..
-
Are you sure?
Cause on mine, I cannot open the ejection port unless that button is pushed up at the same time of charging the handle, or if I put the gun on semi.
Hmmm..
WE are absolutely sure. I think you just had to practice with the handle. There's nothing in the design tht could possibly make the mag catch or bolt release stopping the charging handle. To pull the handle back you simply squeeze the left and right portions together and pull back. Somtimes it gets stuck on one side, if tht happens, shift your force from one side to the other and it should open up...
-
I fired a couple rounds today. Nothing like my M15 CQB (of course) but it's not too bad. Hopefully upgrades will come out soon though, because the FPS isn't to my liking.
Also, has anyone else noticed that on semi, some shots fall flat of the mark, like its getting absolutely no compression? Full auto works like a charm though.
Not really... haven't had anything like tht... althou I had like four double feeds during the last 20 mags or so...
-
Hey FarEast, and everyone else who's interested:
You don't have to take the gun off of Safe to pull the charging handle back. There's a small lever right above the trigger that you push up which unlocks the charging handle. So here's to still being safe while adjusting hopup!
Surely tht's the bolt release for the real steel version and does nothing in the airsoft version... The point about the safety switch is that it is in the way of the ejection port, but NOT tht it stops the charging handle or anything. You do not need to press any switch or buttons to pull the charging handle back.
-
For all you lot with charger problems, have you by any chance checked your bathroom to see if you have 110v Shaver socket ?
incase you haven't saw my post in the other mp7 thread, I've cut the wire of the charger and connected it to my logic charger.... and it worked... So no more crapy marui charger...
this is surely a better solution since you get discharging, fast charging..etc with your normal charger...
-
There's been at least one review of the Glock 18C AEP that put it at an average 211fps with .2 bbs. What the difference in chrono numbers means, though... well who knows? Possibly one of the other chrono wasn't properly calibrated or it's a freak difference in manufacturing tolerances between the two Glock 18C's that were tested.
Back to the can test maybe? just to confirm the results...
I think it's about right since there are now two sources that says it's 0.6J...
-
Frankly I'm too concerned about the FPS. If I can get it to 1J I'll be content I think. If it's AEG-easy to get over that it's likely it won't be allowed for indoor use at my local field. However as it is now it looks like it may be okay. I want to use it for MOUT, not just CQB so it needs to have competitive range. As long as the hop up works well the range should be alright though. Here's hoping.
If fareast said there is a 8.4V batt adaptor for it then I am sure 100mps or 90 mps is quite archieveable... at the most replacing most stuff in the gearbox and motor... Again, the mp7 being quite a big launch there should be enough parts made for it...
-
staticzero is offering to host them for you.
Oh... and please chrono it or at least do the can test... it's the most important question...
-
ok... so my hammer is good... at least I've isolated that the problem is with the mag catch now... Would anyone happens to know a shop that sells p226 mag catches?
-
is it supposed to have a slanted bit on the left top corner of the hammer in my pic?
mind taking another picture of the hammer at right angle concentrating at the top left corner of the hammer?
How many shots can you people get with one mag full of gas, when trying to empty the mag as fast as you can?
-
Could anyone take a pic of a TM P226 hammer like so:
I am trying to figure out whether there is something wrong with my p226's hammer... +1 rep waiting ...
-
Does anyone know where I can get a PGC non rail frame and pay by credit card? (no paypal) It seems that only the sites that do paypal has them...
-
Early 90's, the model that the Marui is a copy of is the SEALS model which was introduced only a year or two ago.
Personally I like the uniqueness of the PGC-nonrailed model, plus I hate the way the railed dustcover looks.
Actually I think I am now liking the PGC- non rail more now.... probably get it... But still after the sale... should have £100 more after this week...
-
whered you get that cheek rest thing?
surely that's the BHI cheek pad... available at most tac gear stores...
as for bolt lock mod, see: http://www.arniesairsoft.co.uk/forums/inde...ic=39779&hl=m14
-
What's wrong with the older trades, makes it more unique than the SEALS model.
I just like it all together with lots of engravings on one side and have the other side plain..
I am still unsure... on the one hand I am the kinda person that likes the gun to be different from most people... So it makes sense to get the non rail PGC but then I like the laid outs of the new styled engravings more and the shape of the trigger guard...
At this point I am not too sure yet but I still need to finish off selling some stuff first before I have spare money for this.... (All other airsoft money being tied up to the EBR fund now...
)Just wondering, would you happens to know the history of the P226? when was the extractor added? and when did the engravings changed?
-
As far as I know. Yeah I strongly vote for the PGC kit, you mentioned the rail framed kit as the one you're going to buy, but didn't you just say you wanted the non-rail frame one?
Yea, but I want the newer styled trades more than a non-rail frame...Hence choosing the railed with new trades over non railed with old trades..
-
Sorry, this may offend a few people here, but creation = ######.
Get yourself the PGC kit, far better fit and finish than the Creation kits. I've felt the creation and guarder kits, and they're really rough around the edges when it comes to build quality. Spend the 230 bucks for the kit, it's really worth it. I swear.
Just to make sure, the creation kit you are talking about is the US260 one with recoil spring and piston head right? The one that's the same as the guarder one is Action I think....
In that case I shall get the PGC railed frame with guarder spring set then....
Oh also... just looked at you website, does the PGC kit not include a barrel? Since you are using the guarder steel barrel for it...
btw... I am using ur skimish sig's picture as my wallpaper now.... it's just beautiful...
-
Sorry I meant recoil spring, not guide, DURRRrrrrr....my bad.
It's weird, I can't say which one is closer, the surface feel of the PGC kit is closer to my real 226, but looks wise i'd give it to the prime. So both are close but no cigar.
How about the Creation kits? Do you have experience with one..? The thing is I want to get a non-railed frame but with the new engraving laid outs, so that pretty much leaves creation the only brand that I can buy... or maybe settle for the old style PGC frame you got.. there's no other new non rail frames is there? other than prime since they are too expensive for me...
-
You guys suck. You just made me buy an OD M14.
Guess im part of the "brotherhood" now?
originally it was only for m14 owners but i am not sure what the rule is now....
2011 Picture Thread
in Weapons
Posted · Edited by FUmiYAsu
I figured this would be a good thread to ask this question:
Where can I find a online shop tht has a springfield or limcat hi capa slide in stock AND accepts VISA straight? (not paypal)...
The other question is, is it actually realistic to put a 1911 slide on a 2011 frame?