accuracy

Looks very nice, hopefully a little more reliable than my original wem4

Ordered some spare spare parts from ab on 24th in early morning. On the 27th he sent an email saying that order has been shipped and gave me tracking #. I ordered some trigger springs, couple part#66, and a new trigger.

well i could never get my rod to align properly with the stabilizer in the first place. So i just tossed it aside and don't use it. It should be fine considering i've already fired 4000 rounds thru my gun without it. Just make sure you check if it gets loose or anything, or you could loc-tite it as well

ohh. okay thanks guys. do you mean the sear not the trigger? cuz i didn't know that you could wear out the trigger. is there an entire reinforced premade triggerset that i could purchase to save money? otherwise i'm guessing this is what i'll need right?: http://airsoft123.com/index_eproduct_view.php?products_id=6 http://airsoft123.com/index_eproduct_view.php?products_id=7 And do you guys think that my problem with extra gas being expelled after a shot fired could be caused by these parts being worn. Cuz i replaced my chamber and nozzle with the CO2 conv. kit,

well i managed to fix my double feed problem with upgrading to CO2 kit. however, when i pull the trigger to shoot on Full auto mode. The gun will just keep firing non stop until i either pull out the mag or change the selector switch. The reason it does this is because when i let go of the trigger, apparently the return spring isn't powerful enough to overcome the recoil and return it to original position. So if i manually push the trigger forward it will stop firing. Any ideas?

Wow thank you! too bad it cost me 60 bucks.

dear god. I've been looking everywhere for the co2 conversion kit as well for the last month. Only have seen just the new co2 nozzel. but no one has the compatible #111 and #112 chamber to go with it. Someone PLEASE tell me when someone has them in stock. My rifle is useless until then : /

I ordered one online and it woudln't fit right out of the box. I took some calipers and did notice that the RS one is just a tad bit bigger. And eventually i found out that the nubs that stick out of the handle that sides along guide rail inside the receiver were causing it not to go in all the way. For me, i had to file down the sides of it. and from the top a bit. Then it worked smoothly for me.

So it's been three weeks and i've sent this message twice: they're ignoring me now. this is ridiculous

then that sucks because I can't get all the parts I need. Evike says they're ETA sept 15 though... sigh. they're annoying though I ordered the valve and a magazine for 80.73. And i asked to cancel the magazine the day i ordered it It's been a week and a half and they have only refunded the cost of the valve (37.31) after it took them a week to find out that it was out of stock. They have yet to pay me back my magazine and shipping ($43.42). I don't quite understand why it takes so long.

do you need a new gold chamber thing for the co2 valve or can i use the original cuz the nozzel is bigger.

ya but it doens't come with the housing and also it says "* AWSS valve head NOT included in kit. "

Does anyone know where I could find the entire chamber and valve upgrade? http://airsoftbuddy.com/index_eproduct_vie...products_id=370 Evike said it was in stock, but they lie and then 5 days later, canceled my order. So dumb, they still haven't even updated to show it's Out of stock. http://www.airsoftpost.com/awss-stainless-...gn-p-31266.html

well. I just tried to shave the nozzle tip a millimeter (measured w/ calipers). And it didn't fix it, i think it made it worse. Has anyone had troubles yet with this upgrade using propane? http://www.airsoftpost.com/awss-stainless-...gn-p-31266.html

Wow thanks! What you are saying does make sense. I will try that later tonight. much appreciated, but let me try to see if maxing out the hopup will change anything. but it's still wierd since i switched from my 500+ fps valve to my 400fps one. and i've used both valves a lot before with no troubles ever, until just now

nah. sigh, i'm pretty sure it's not the barrel. it seems prestine. My biggest guess is either the hammer mechanism or the magazine. One of which is still letting gas continue to leak out of the chamber after it's been fired. I don't have another magazine at the moment. I can't find any used ones anymore online, and I can only see it on evike for 40. The thing that bothers me the most, is that i don't know what's wrong. I think it's either 3 things. Magazine. the valve assembly. Or maybe it's #117 (but i dont' think so) Is there a way to take apart the

yeah b/c i have used two separate barrels. and also changed hopup on new barrel as well. i'm pretty sure that's not the problem. I have adjusted the hopup to different positions as well. makes no difference. : /

yeah, that's sort of what I guess was happening as well. I can't say that every time it happens. But you're right, most of the time when i get double feeds, the first one can actually penetrate my cardboard target, and the second one just plops out. The spring is towards the front, infront of the floating valve pushing it backwards. I wish i had another magazine to test it out with. It's just wierd that it appears to have happened right after my old nozzel snapped. But my magazine isn't leaking or anything. wierd

Hm. Thanks for your reply. I did lube up my floating valve more. And i just did a test putting 1 bb in the magazine at a time. When magazine only had 1 bb. it fire flawlessly. However when I have any more, the will often double feed.... Stock barrel does the same thing, but not as often as the new one for some reason. EDIT----..... So I just found out a lot more information. I have no idea why my gun is double feeding, it is so wierd. So what I did was put two bb's in the magazine. Cock it to load the first BB. Took out the magazine again to mak

Wow, This is soo aggravating! I can't see ANYTHING wrong with the gun. It appears to dryfire and cycle just fine. 117 doesn't even look deformed. My valve slides in and out normally. I have used different hop-ups. Everything appears normal. but i'm still getting double feeds and super low fps. And more so, with my new barrel. Anyone help?

ya, i took it out and made sure its in correctly. I have the original valve and housing that came originally with the v2 where can i purchase part 117

Something really wierd and drastic happened to my gun. I recently just bought the new 6.02 chromed barrel with latest black hopup from AB. I fired that for a couple mags and then my 500fps brass nozzle snapped. So i just switched with my original lower fps nozzle. And now for some reason, like 90% of my shots only shoot like 3 yards and then drop (really weak) The gun appears to cycle well, and kicks well too still. I even used a new canistor of propane. Any ideas? edit: My gun double feeds sometimes. And then a lot of times, the shots are just low po

I bought a brand new steel bolt catch, and the TSC Bolt Catch plates, and my gun still isn't locking back every time. Any ideas anyone?

has any one had any experience with the new hopup rubbers besides alston yet? i'm wondering if they're worth 2 more extra bucks.

i've been waiting for AB's short length v2 barrel but it's been out of stock for so long and he doesnt' know when. I'm using .28's and i'm overhopping with v1 barrel. it sucks.