-
Content Count
5,281 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by bankz5152
-
Hopefully but all too likely. The VFC MP5 bolt stop system wasnt too bad, i wonder how the nozzles/followers have faired... On my phone, my spelling will suck
-
Its fitted!!! The kit is lovely, a 500% improvment on the old kit. The finish is excellent and the trades are crystal clean. My only issue is the slide is VERY STIFF. Requires some real strength to rack and will not cycle. Cant work out why Yet the new slide works on my old lower and the new lower works with the old slide.... Still find it amazing that the DE had been out for 13 years and no one has thought to make hop rubbers! On my phone, my spelling will suck
-
Wooo! My kit has been delivered! Got to say Boom Arms have done an excellent job, was dispatched Weds afternoon, arrived today. $18 for shipping and NO tax/charges to be paid! I am a happy bunny
-
On the 10" yeah or on the KWC ones but I think you can get some clone hogue ones On my phone, my spelling will suck
-
I have got a Guarder electroplated front outer batrel in chrome but is missing the 'prongs' that hold it to the hop chamber On my phone, my spelling will suck
-
They are a fair bit bigger, you get used to them after a while. Failing that the airsoft rubber grips are much slimmer On my phone, my spelling will suck
-
Haha yep me! Was glad to sell em for somthing so awesome. Got genuine Hogues on mine, they are damn comfy On my phone, my spelling will suck
-
As has mine! :D Got my donor sitting here ready. Sadly it is the 10" Biohazard pistol, it got ruined in a skirmish then I sold the grips to Kodiak to finish his 24k gold DE.
-
Looks like it was down to the rubber been too soft. Think it was a maple leaf 65, am I right in thinking a 75 is harder? On my phone, my spelling will suck
-
Floating valve, nozzle and TMH are all fine. Hop rubber does feel very soft so ive removed it for the time being. Hop adjustment has zero effect. Going to strip my MP5 tomorrow take the rubber from that and test it. On my phone, my spelling will suck
-
Did use some PTFE on a couple seals but don't think thats the issue
-
I did use silicone oil to seal the mags though filled and vented several times to avoid the oil getting in the gun. Also fired each mag, no issues. I'll check the retainer spring and the rocket valve tonight/tomorrow.
-
Had my P90 out yesterday, ran perfectly for the morning though come the afternoon it was having hop/gas issues. Not had a chance to have a proper look at it yet though... Basically I went to shoot someone and the range had dropped to around 10ft felt like there was no power behind the shots. Tweaked the hop no change. Changed mags and all seemed fine, though the issue cropped up again about 20 rounds later.
-
That is good to know!! On my phone, my spelling will suck
-
Precarious way of thinking! Especially when its hard if not impossible to get a spare hop chamber! On my phone, my spelling will suck
-
Awesome! On my phone, my spelling will suck
-
+1 Equally don't want to go wrecking my GB-Tech RD Upper for something I know very little about!
-
Yeah mine works fine, just have to stick to semi and dont be trigger happy On my phone, my spelling will suck
-
Had no idea about that! Guess im not looking close enough!
-
Trigger case is a good idea, sooner or later that ABS will crack and fail. The latch however hmmm not really needed but good to know its there.
-
I had to sell my spare mags as needed cash. I miss my MP5!!! This is a fantastic release from WE On my phone, my spelling will suck
-
Got to disagree with almost all of that. The plastic nozzle survives fine, my other metal DE has the first Guarder kit since it came out never broke. However the so called reinforced nozzle broke after 2 mags. As for the hammer spring that does nothing but increase slide resistance. High flows, maybe but not if you want to use it in anything less than 25c outside. 120% recoil springs however yes. On my phone, my spelling will suck
-
Haha fair enough! In that case ill stick with my original order, bought a spare nozzle incase I break it fitting. Im actually very excited! I bought the first electroplating kit but an asshat friend left it in his damp garage for 3 fays which wrecked the finish around the trades, it started to bubble. While he was doing some work to it. This one will remain pristine, but will be used. Going to make a faux alcantara lined kydex holster for it. Similar to the blackhawk level 3s. Max protection to keep it safe! On my phone, my spelling will suck
-
I'm waiting for them to reply to me as to when they actually ship. Considering canceling my order with Boom Arms and buying from them
-
Ahhh for some reason I thought you had 3d printed it... not sure why! Ok cool. Not to worry, any pics? On my phone, my spelling will suck