bankz5152
-
Content Count
5,281 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by bankz5152
-
True! I have polished parts of the bolt to a near mirror finish which seems to have helped mine run a tad better. Also swapped out the rubber and nub, both of which have increased accuracy and range and bent the trigger bars for a tighter pull but thats it. Would like a steel hop unit & bolt stop for the future and obviously the RDS upper.... Mines not gotten stuck yet which is good on my phone, my spelling will suck
-
Just ordered the steel gas nipple, $12 from WGC. I don't need it but I was ordering a few other bits for my HK45, more piece of mind.
-
I would yes. I've put around 3000 rounds through mine so far with near enough no issues. So yeah awesome gun. Cold weather performance is astounding aswell.
-
Tan P90 on sale at UNCo - $239 https://www.uncompany.com/pageproductdetails.asp?prodid=37143
-
Hmmm ood idea. Don't think I have been supporting them that way, but will now!
-
Ahh thats not a bad shout. One has already cracked but not to the point of failure, but I can reinforce the others. Not sure ive anything that thin lying around though...
-
KIC Just ordered 2 in case. Not had any issues at all with mine, friends one has the minor issues. Also after probably ~70 mags through my bolt stop is still intact and working! However the dry fire switch on the mags keeps getting knocked so I think I'll remove them. One thing I have noticed is in the future people may start to see an all too familiar issue with the mags. One screw holding the plastic sheath on, just like the G36. Once that cracks mags will become a pain, hopefully someone starts selling the shells like the did for the G36. I am seriously loving it though, well wort
-
Weather has been very hit and miss here! Sun has rapidly turned into hail and rain! on my phone, my spelling will suck
-
Second proper outing with the P90 today. Still impressed. Relatively warm day today, performed excellently all day, however toward the end it did start to sputter a little. However my mates P90 was having minor issues all day, mainly kept doing an auto burst when in semi on seemingly random occassions. Also the little brass nipple got stuck down at one point and kept venting the internal tank Further inspection showed he was being a little too aggressive when reloading and slightly misaligning the nipple and the mag. So I would suggest to everyone to fit the little rubber buf
-
Not sure but I still wouldnt trust it.... on my phone, my spelling will suck
-
WE by one million miles IMO. Though I hate VFC, externally brilliant guns but internally may as well be birthday cake. Not to mention the WE is considerably cheaper, requires no mods out of the box to actually work properly, if bits do break (don't know of any yet) then spares are cheap and easy to fit.
-
What same results? Power or accuracy/range? The fps will fluctuate as it is a gas gun, no two shots will be the same. Especially toward the end of a mag or the begining. on my phone, my spelling will suck
-
Thought so may have a tinker.... on my phone, my spelling will suck
-
Plenty fast enough as is, more of a general wonderment/engineering exercise.
-
Just installed a Maple Leaf 60 degree & a flat nub into my P90 with the standard barrel. Pretty impressed, range has improved as has accuracy Also anyone think you can up the ROF by adding a spring or buffer behind the bolt? on my phone, my spelling will suck
-
Put 4mags through it with no issues at all, chocking it down to the cold. It was about 2c and hailing on my phone, my spelling will suck
-
Just checked it again seems to be fine! Must have just been ice cold on my phone, my spelling will suck
-
What *albatrosses*! Got to take a look at my mates P90 tonight, bought the same time as mine and fired roughly the same amount of rounds. Though its stopped feeding.... Insert a fully loaded, fully gas mag, cock it and nothing or itll fire a round or 2 at very low power.
-
Just read on FB RA-Tech have confirmed metal upper for the P90, no idea which upper though...
-
Hmm. I fitted a Falcon grey now which seems to fit perfectly and adjust properly even with the standard barrel on my phone, my spelling will suck
-
Used my P90 for the first time yesterday. Even with 2 - 3 degree cold, hail and frickin snow it performed excellently. Minimal cooldown, locked back every time. Range suffered a tad though Over all very happy! on my phone, my spelling will suck
-
Not popped mine open yet but that looks much more like a standard VSR/PDI set up as opposed to WEs new buggering about. Any chance you could check if new rubbers will fit without changing the barrel? on my phone, my spelling will suck
-
Broken link on my phone, my spelling will suck
-
I find a good practice is too tighten up fully then back off half a turn. Usually does the trick. Equally I have been using some nitrile o-rings instead of the regular rubber ones, they are much better. They squash down much better and deform to the shape, almost like removable sealant. Sounds odd but im happy and my mags are leak free.
-
I could not agree more with the drum mags. I cant imagine it would be that difficult to make a simple injection moulded drum with a couple big *albatross* springs on my phone, my spelling will suck
