sigmaboy

VFC 416: CA SPR: Here's a picture of how I ran both of them at a game yesterday:

Were not exactly a team. ie. we dont have a team name, or requirements, but were all good friends who go to the same school, and who happen to love airsoft. aaaaaaaand, tactical piggyback

sorry, but it will. My G&G SOPMOD/SOCOM stock is quite heavy, but i like it. puts more weight in the back of the gun. i cant speak for the SOCOM GEAR version, but id assume its about the same weight.

Why? Theyre two completely different guns.

im actually using a very small lipo in there. its a HOT POWER 11.1v 1100mah 15c lipo that goes in one of the tubes.

doesnt exactly meet your requirements. but i figured it close enough. it looks much better with the PEQ on top, but it partially blocks the ACOG. maybe if you had a VFC PEQ, or a lower profile one, then it wouldnt get in the way, but i cant say for sure.

Erik, i dont know if your aware of this or not, but the HK416 iron sights are not the same height as regular M4 iron sights. so the HK416 BUIS you have on your gun doesnt line up properly with the triangle from sight.

its not for CQB, i just prefer a shorter weapon. the gearbox is shooting upwards up 420-430fps, and im getting around 220ft range, so it definitely does its job in the woods. so the ACOG is nice for checking the path up ahead and getting a closer look at the "dark spot" in the bush, and a boost in accuracy.

thats an oxy-moron if i ever heard one. ill trade you for my NV 2 . my mom has the 1st gen iphone, and its pretty damn nice. i cant imagine what the 3Gs is like. regardless, ive never seen the KAC handstop used like that. this is how ive seen it used. to each their own.

umm, PTWs come stock with a chrome buffer tube.

the upper for my VFC 416. im working on the GB right now, getting it ready for a CQB game, and installing new wiring. the G&P ACOG just came in today, so i thought id snap a few pics, even though the lower is in pieces.

the upper for my VFC 416. im working on the GB right now, getting it ready for a CQB game, and installing new wiring. the G&P ACOG just came in today, so i thought id snap a few pics, even though the lower is in pieces.

the micro aimpoint looks HAWT on the LR300. thats possibly the best looking LR300+Optic combo ive ever seen.

sorry for the rather shoddy pic. but its a VFC 416, its a bit different now though. and no, its not in this thread because of some uber expensive optic. most of the money is inside the gun, with a bit on the outside. ill try to get a better and more recent picture. but a quick parts list of the externals: VFC 416 G&P 4x ACOG G&G SOPMOD stock Surefire 6P w/ R2 upgrade LED King Arms full steel Noveske KX3

WHERE DID YOU GET THAT PRESSURE SWITCH! ive been looking all over for one compatible with my 6P, and cant find one. all my wildest dreams may have just come true.

Surefire 6P LED w/ R2 Drop In, Surefire G2 LED, StreamLight TL-2, Coleman MAX, 2 pressure pads that work with both the 6P and the G2 290 lumens, 85 lumens, 78 lumens, and 115 lumens respectively if anyone wants the Stream Light TL-2, toss me a PM.

its just you, its still on straight.

here my CYMA AKS74U. ive been kinda torture testing it lately, burying it, then leaving it there overnight, dragging it behind my car, tossing wood in fire, kicking it everywhere i take it, ect. so far nothing bad as happened. funny thing is my friend dropped it on my carpeted basement floor, and the hinge for the battery cover/upper receiver thing broke. it was an easy fix, but it so far nothing has broken other than that. parts list Guarder Infinite Torque up motor element gears KWA piston KWA piston head KWA bearing spring guide (yes, the KWA M4s use a V3 spring gui

here my CYMA AKS74U. ive been kinda torture testing it lately, burying it, then leaving it there overnight, dragging it behind my car, tossing wood in fire, kicking it everywhere i take it, ect. so far nothing bad as happened. funny thing is my friend dropped it on my carpeted basement floor, and the hinge for the battery cover/upper receiver thing broke. it was an easy fix, but it so far nothing has broken other than that. parts list Guarder Infinite Torque up motor element gears KWA piston KWA piston head KWA bearing spring guide (yes, the KWA M4s use a V3 spring gui

took some pics a couple weeks ago before i shipped out my SRC 416 for a CA SPR. SRC: VFC the VFC has a G&G SOPMOD stock on it, but i dont have a buffer tube lipo for it, so im currently running a ghetto rigged intellect 9.6 2000mah under the stock

ive been tweaking it a bit, and right now its probably doing about 410ish fps with all stock parts, other than a new hop up chamber an bucking. its getting about 210' range as of now, and i havent even began to start throwing money at it. its getting pretty much gutted soon. Guarder Infinite Torque Up Gears Element Half tooth piston G&P M160 motor SP140-150 edGI 6.01 or Promy 6.03 KA hop up chamber systema bucking SCS nub AB Mosfet 11.1v Lipo *Maybe* the AJAX STS i think im gonna sell the systema bore up kit, im not positive yet, but if anyones intere

dont worry, my parade already got rained out. someone else informed me that the new CA 7mm gearboxes come with the ribbed cylinders. i have a systeam bore up kit lying here, but the CA one gets surprisingly waaay better compression. so im leaving that in there for now.

a rather large scope will be added soon. i just need to do a bit of research as to which one.

classic army M15A4 SPR with crane stock. i was told it was all stock CA, but he shipped with the upper and lower receiver separated so itd fit in the box. and i notice the cylinder is an silver/chrome, ribbed cylinder. all the ribbed cylinders ive seen are bore up cylinders, so i guess it isnt stock CA, which im perfectly fine with the hop up is broken though. ill try swapping a few parts with some spare chambers i have lying around, but im planning on getting a new chamber anyways. the fps is great, ROF leaves quite a bit to be desired, and the range is poo right now because of

classic army M15A4 SPR with crane stock. i was told it was all stock CA, but he shipped with the upper and lower receiver separated so itd fit in the box. and i notice the cylinder is an silver/chrome, ribbed cylinder. all the ribbed cylinders ive seen are bore up cylinders, so i guess it isnt stock CA, which im perfectly fine with the hop up is broken though. ill try swapping a few parts with some spare chambers i have lying around, but im planning on getting a new chamber anyways. the fps is great, ROF leaves quite a bit to be desired, and the range is poo right now because of