Warning

WOOOOOOOOOOOOOO, its some what alive! Just need to get one of those 14mm converter thingys so i can shorten the flash hider section down, then front wire it and then sort the freaking gearbox out, and BOOOOOOOOOOM!!!! I've got a G3KA4 I tell you all that effort wasn't really worth it

thing is I have one but not a Dremel, but one of those own brand DIY store ones, but in all honesty I haven't a clue on what things do what Isn't that a tad drastic, there mr Azulsky? and surely PDI parts should already fit together all nicey nicey since they cost so blooming much?

ARRRRGGGGHHHHHHHHHHHHHHH right fellas i've got a CA33 front end but the cocking tube refuses to go on to the G3 upper i've got any ideas?

it wasn't meant as a joke, but re-reading it i can see how it could be taken as a joke, sorry if it caused any offense or anything, it genuinely wasn't meant that way. I genuinely meant that i would buy one, so that when i got around to getting a L85 i could put it on there, personally i would probably have to have one on a L85 if i did have one, it just suits the weapon to the tee. tbh im slightly annoyed at my self now for causing this miss understanding sorry again

ubar: any chance of getting that to someone who would make a few copies? cause i'd buy one for my none existent L85

any one know of a good place to get a proper temperate UBACS in medium that's in stock from? I checked cadet direct/survival aids (same company?) and there out, and flectarn.co.uk has the version with the removable sleeves, any ideas?

if you don't know how to downgrade it there are numerous retailers that are out there that will happily downgrade it for you at a cost, that said if you do want to have a go at doing it yourself im pretty sure the people on these very forums would be willing to help guide you throu it

imho if its clone of the VFC (which it is isn't it?) part for part I don't see why it shouldn't fit, other than perhaps if the Dboys one is a little off in measurements or something

does any one fine the G&G receivers slightly annoying? Just tried to fit two of my other stocks (classic army and one tokyo marui) on and couldn't get the front rear pin in but the rear most pin went in fine, any one got any ideas one why?

willing to part with your dboys (no but seriously are you willing?)

lovely lovely G3, btw what sight unit is that? since it suits it to the dot

I dunno what it is but something in my brain just says "awww... that AK looks cute"

@ Chaoslord800: only thing i could suggest is is to check the wiring, and check if you haven't got the Tamiya head thing isn't on the wrong way around, have another look throu often the littlest mistakes are the one you miss @ Azulsky: my god that looks awesome not so sure about the shiny metal cocking tube thingy, are you using a plastic body or a metal body?

wait what? you can leave your gearbox rear wired like this: if you look at the back of my gearbox you can see the plastic part with a cut out top (the SG1 plastic thingy doesn't have this cut out, this plastic thingy is from my MC51), you need that cut out so you can run a from there up and along the left side of the gearbox (left side if you look at it with the loading nozzle facing away from you). if you look down the rear of the upper receiver you'll see this: basically the wires need to go from the back of the gearbox, down the length of the receiver on left hand side, left

Just a heads up on the G3 Stock base: Laylax Website has pictures of it and has it for order, does any one know if they ship internationally? picture links http://www.laylax.com/user2_data/images/07...518611a8c20.jpg http://www.laylax.com/user2_data/images/07...517be704c66.jpg http://www.laylax.com/user2_data/images/07...517bf193212.jpg

did no one read my reply? you can order one from ASG or a Classic Army retailer EDIT: WOOT 666 posts XD

you know i reckon if it was a little cheaper and came with the rails instead of the mars i'd possibly get one

if i remember rightly there's a Classic Army one

if you manage to get ahold of one could you post up a link im sure a few of us would love to have one, i'll keep a look out aswell

just seen this http://www.cheaperthandirt.com/49794-1.html any ideas if this will fit a TM G3/SG1 end cap thing that holds on to the rest of the stock? Also related to the above TAPCO CETME T6 Collapsible Stock, does any one know where to get a hold of this http://www.laylax.com/products/detail.php?product_id=4058 o and this popped up while i was googling for the laylax stock base and before any one says something ITS NOT MINE the source of this monstrosity http://www.flickr.com/photos/pozland/2849184372/

might want to protect the end of that very nice PSO scope with something don't want it getting shot out . tbh thats not an SVD, thats just porn

it didn't have StealthBomber's semi auto fix in it from what i remember

O so your the one who downloaded the file i uploaded and tbh i don't remember where i got it from (the file i uploaded had the piston mod and disabling the blowback thingy init)

hm... the internals look dire if your wanting a better/replacement piston do like the idea of the micro switch in there and i really hope that wires just there cause it taken it out of a grove and not just place across a gear might have to wait and see about the TSI since the Ares is looking a little too grim for my liking

IDEA!!! put it back together just so you could make a mould of the thing and then make a better quality stock and make moneys i'd buy a moulded stock thingy version