p.briden

I figured it might have been for an external CO2 rig? Edit: Folding Stock guide is up, such as it is: linky

Yeah that little hole was on there when I got it but it was clearly drilled by a previous owner and I'm sure it didn't come like that new. Also I've started working on a "How to" for the folding stock but there's gonna be some gaps in it due to that mystery part .

Thanks guys . To be honest I'm not 100% sure what brand the hunting stock is as I bought it second hand but I believe its made for the Maruzen gas 870's as it had a compartment which I think was intended for a gas tank. Something like this: Linky (though mine is the plastic 'synthetic' style one and not wood of course) I suspect other brands would work but any 870 stock is gonna take some extensive tweaking to get onto the Benelli receiver. I have access to a Dremel with alot of different heads and used that for most of the work, which was simply a case of trial and error.

Latest mod for my Benelli M3 shorty boomstick (Tokyo Marui). ATI synthetic folding stock attatched to a modded M3 pistol grip. Needs a bit of minor finishing (need to cut the protruding end off the bolt which holds the stock arm to the grip) but I'm pleased with the result. Still haven't touched the base gun in any way and still have the original vanilla grip untouched if I want to use it. Also still have the modded Remington 870 Sport stock which still works but has developed some unsightly cracks and chips (I may have to get a new one and mod it again at some point).

Thats pretty much exactly how I like modern revolvers to look. Unfluted cylinders for the win. Nice one .

@ Darklite & Kaworu: I take it because you guys have gone to such lengths to permanently fix LR300 stocks to your AKs that this couldn't be done in a non-permanent way with a King Arms/ACM M4 Stock adaptor? I've been putting off getting the parts to do this for some time but always assumed the adaptor route would work fine.

Really nice 1911 Wutang, good job . Are the wood grips actually that red-coloured in real life or is that just the photo?

der-Loki I have questions about your M3: Does any part of the modification permanantly alter the M3 in some way? (ie: to get that stock/RIS on there did you have to chop, grind or drill the base gun at all or use glue/putty to permanantly fix it in place?) Does the stock setup incorporate the M16/M4 stock tube in such a way you could use other styles of M4 stock if desired? Can the M16/M4 pistol grip be swapped out with other types of M4 pistol grip if desired? Could this setup also be attached to a DE Benelli M4? Can you make me one and how much would it cost?

Ledpocket already did. Check the Tech forum.

there was a pic in the old shotgun thread where a guy had put that folding stock on a TM M3 Shorty by attaching it to the standard TM pistol grip through the hole where the rear sling loop goes. I PM'd him and asked him how he did it but never got a reply, I don't think he's a very active member , at least not any more. At some point I plan on buying one and giving it a go.

Unseen don't quote pics

http://www.casesbypelican.com/index.htm I think this thread is a great idea . Anyone know of a case manufacturer that makes cases which are quite deep and/or multi-layered? I need something that will store my G36C on one layer and a load of accessories for it in additional layer(s) (my G36 will eventually have enough parts to make most G36 variants and I'd like to fit it all in one case). Also, does anyone use any cases for carrying airsoft guns that were designed for other purposes, by that I mean if you used say a toolbox for example, just anything that was not intended for ca

that Magpul PRS really suits the M14. I'm almost tempted .

can anyone give me the dimensions of an MP7 standard mag in milimeters please?

sorry to be a nuisance guys but if anyone has a Glock 18 or similar sized variant with a scope mount and some form of Eotech Holosight in their collection could you please post pics of the latter attatched to the former? I really need to see what this looks like. Also does anyone know if the TDI Glock Stock will fit a Glock 18 AEP? I'm referring to this:

very sexy

pic request; Glock 18c with rail and Eotech 552. I just want to get an idea of what that looks like, I have a feeling it may look too bulky. cheers.

blasphemy! burn him! *waves torch menacingly*

I recently put a birdcage on my G36C/K and it certainly does look the business (also good for using M4 QD Suppressors), no photos yet but I'll get some up shortly. Also worth considering are some of the G36-oriented flash-hiders Madbull makes which look very nice IMO.

evidently we have very similar tastes in shotguns as that was something I was planning on doing (although a slightly different choke design) + the heatsheild and our mutual appreciation of 'rifle' stocks here's the one I was interested in, only difference from yours seems to be no spiky 'glass breaker' edge; I believe its made by TDI

awesome choke dannyboy is that custom made? How is it held on?

I concur. Fake Ivory/Pearl FTW

quick question; does anyone know if cheaperthandirt.com ship outside the US?