Epyon

Had some requests for more/better pics. Well......I can do the "more". I really like the RIS. It needed some bracing though. I put a longer screw through the rail with a spacer into upper reciever. No more quick barrel removal here. That square bit behind the cocking handle serves no purpose. Oh, and the top rail is off of my P90. Flip sights down You can see the bolts in the magwell, they don't interfere at all. *Edit* Stupid interweb

Double post

The sig is just for laughs, but I use the AK all the time. I shimmed the gearbox and put in a different cylinder/piston combo I had lying around, and a spring of unknown strength. The inner barrel is a tightbore, well... a scrap of one. I took a piece I cut off of a Madbull barrel and cut a new hopup hole. Anyhow It'll very nearly punture both sides of a can. Until recently I had the stock pistol grip on it. It was pretty creaky. I just put on a CA one had to modify the reciever a bit, but it made a world of difference. It's a very solid, and so far reliable gun. Accuracy-wis

ICS : m120, Madbull tightbore to end of barrel, Cherokee CETME cheekpiece, Nitro V.O. rail sleeve, BSA scope. ICS/AE : Airsoft Elite upgrades + m120, Star tightbore, Nitro V.O. rail sleeve, Just handguard, CAA folding fore-grip, ICS cocking tube mount laser, Barska 50mm RDS. 11.1v LiPo. ICS MP5SD, rs M4 stock+cheekpiece, ICS RAS, Systema m150 gb, Barska 50mm RDS, 11.1 LiPo. ICS MP5A4, shortened cocking tube, MP5K RAS, M249 butt plate, Systema high speed gb, 11.1v LiPo. Cyma CM027, shortened cocking tube, RAS off of Well springer, m100,external 9.6v mini in s

I got some goodies today. ICS : m120, Madbull tightbore to end of barrel, Cherokee CETME cheekpiece, Nitro V.O. rail sleeve, BSA scope.

You can also use slat board like alot of shops use, but it's expensive. I prefer pegboard, because there are more height options. It's easier to get your guns sitting level. Oh and it's cheap.

Man, I wish you had told me before I went to all this trouble. Seriously though it's like 135% plastic and Chinese why wouldn't it creak.

My constantly changing wall.

It's a Double Eagle (UTG). The barrel is a vacuum cleaner extension, I just held it upright, set a light bulb in it upside down, and heated it with a heat gun. It turned out alright. Gets some looks.

Nothin too different here. Pretty hot internals though.

My Elephant Gun.

Bad pic, but the angled bits are brushed aluminum. It made the gun hella stiff, no creaks. Mag changes took a while to master though.

To each his own right?

Actually I fit a 7.2v batterry in the hand grip, it's just an lpeg.

BE SL8: CA gearbox & hopup, 650mm inner barrel, bipod foregrip (off of DE springer), M120, 10.8v custom nimh.

BE SL8: CA gearbox & hopup, 650mm inner barrel, bipod foregrip (off of DE springer), M120, 10.8v custom nimh.

Battery sling, you can kinda see the wire. I actually use this alot. It has very poor accuracy, because well the barrel is litterally ----------------------------------------------- this long.

Both are Well R7s Flame on

Some HK goodness

Double Eagle M82 + Dremel =

BE mgb with some reinforcements, and Best Gun RAS.

Heh, Heh