Jump to content

Horse

Regular Poster
  • Content Count

    311
  • Joined

  • Last visited

Posts posted by Horse

  1. Real grips fit once you have modified them (holes). The easiest way to make the stock grip tighter is to remove the stock grip screw and remove about 1/8"-3/16" frmo the end of it. Mine bottomed out at the base of the threads prior to being tight on the grip.

     

    When I installed my RS grip I had to shorten my screw about 1/2"

  2. Got this back from RS:

     

    Dear Horse,

    Thanks for your approval on our product, and what you favored is already in our agenda, but we have no exactly idea about when it will be released. You will be informed if I get any new info about it.

     

    Best wishes!

    Sophia

    RS Service

     

  3. I'm going to a game on Sat and plan on trying .2's .25's and .3's.

     

    I will post results.

     

     

     

     

    I finally got my MAG brand mids to feed correctly - it took a hand file and CAREFUL filing of the latch to even it out accross the latch and bring it down a smidge more. The 2 I tried yesterday fed like champs on both single and FA.

     

  4. Draco - Where are you located? Im in Layton!

     

    TWO DG AK's in one place - Fantastic!

     

     

     

    I chronoed my DG 105 and obtained 330 FPS with 100 PSI (CO2 at room temperature at WeaponBlender SLC). This is with the stock recoil spring - the high rate spring is currently on order from Sparrow and with it on 120 PSI should be shooting 390. The guns (as pictured) come with the entire mizzle brake caked in red paint. This was easily recitifed with a little bit of brake cleaner in my case. They also come with the standard Kalash mag seating problems - again easily cured.

     

    The recoil is stout - and on par or better than a GHK. I won't say it is the same ammount of recoil as my real steel 5.45, but it is the closest thing I have felt in an airsoft gun.

     

    The CYMA Ultimak I purchased at The WB was a breeze to install. Retro-Cow and I had it installed in about 2 mins of tinkering. I also modified a real steel grip so that I can have a proper thin AK grip. I intend for this to be a near exact clone of my real steel, and so far it is awesome.

     

     

    I hope to see you on the field Draco!

     

    A few pics of mine:

    DGAK1.JPG

    DGAK2.JPG

    DGAK3.JPG

    DGAK4.JPG

    DGAK5.JPG

    DGAK6.JPG

    DGAK7.JPG

    DGAK8.JPG

    DGAK9.JPG

    DGAK10.JPG

  5. Thanks for the review!

     

    I myself went with the external air becuase of the circumstances you mentioned in your post. CO2 being essentially cheap and easy to find in the US, and the high cost of magazines led me to DG.

     

    But - the GHK is still a sweet piece of kit!

  6. the PC gearbox is fantastic is all I know. I have over 100K rounds through my FNC (same basic gearbox) and just barely had to change the hop rubber and changed to a low FPS stock Marui spring in order to use it for CQB. After nearly 3 years it was still shooting 376 average FPS.

     

    If they put in a crappy pot metal gearbox I would not use the gun at all.

  7. Hello from Tac-4 Israel and a shout out to the real hero's of the IDF.

     

    Here is a picture from our last game on Sat:

    IDFFNCQB.jpg

     

    And some other pics of our team to start off this thread on a good note:

    game_photo_72.jpg

    game_photo_74.jpg

    game_photo_46.jpg

    game_photo_75.jpg

    game_photo_47.jpg

    game_photo_48.jpg

    game_photo_54.jpg

     

     

     

    From henceforth let the IDF goodness flow forth.

     

     

    (my hosting sight sometimes goes on the fritz - don't worry if you can't see the first image)

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.

[[Template core/global/global/includeJS is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]