Jump to content

Mazor

Members
 View Profile  See their activity

  • Content Count

    13

  • Joined

  • Last visited

 Content Type 

Posts posted by Mazor

  4. BOLT M4A1 Internals

    in Rifles (AEG)

    Posted

    I echo others, if you want good recoil AEG, get either TM or PTS.

    Bolt is nice, but too expensive for what you get.

     

    It is not a bad gun at all, my one have good accuracy and range, recoil is nice and all. But for same price you can get something better, hopefully.

  11. BOLT M4A1 Internals

    in Rifles (AEG)

    Posted

    That's pretty much it - an average performing AEG out of the box with very good recoil! Had to spend a little bit getting it to "great" performance, but it was desperately needed. Shame about the faux bolt, I just hope a better quality replacement part is available soon. 

    Care to share what have you done so far?

    I opened the GB today, basically everything looked okay. Anti-reversal hatch shoved some serious wear, picture later. 

     

    I need take pictures of my mods, so they can help someone with similar problems.

     

    And someone talked about the dust cover not closing. Mine closes, but won't open when shooting the cover closed... It flipped open before the piston hook broke, but now with metal one it does not.

    Bolt moves, but somehow I have messed with the bolt mechanism...

  12. BOLT M4A1 Internals

    in Rifles (AEG)

    Posted

    I have to upgrade my complaint level on this from "niggle" to "disillusioned"! Really not for the £320++ asking price, as you'll have to spend money reworking the internals (and this is not a matter of if, it is a matter of when AND how soon). 

     

    Still the recoil is much heavier than the TM versions - but still, not worth the extra spend at the moment. Very, very poor product for the price.

     

    I have same opinion here. It is really nice and fun gun to shoot, but not worth of it's price tag... I paid 400€ for this gun, for that money I could buy really good gun that works well OTB.

     

    Wires and castle nut are giving me bad headache right now. I am going to open the GB, but every time I do this the wires lose their insulation, resulting to shorting. This time I will drill through the receiver end plate and route wires through there and then under to the buffer. It costs me the sling attachment point, but using the stock one anyway.

     

    I am keeping this sucker, it is so nice to shoot. Some day it will be perfect, I hope.

    • Like 1

  15. BOLT M4A1 Internals

    in Rifles (AEG)

    Posted · Edited by Mazor

    I throw my spoon to this also, I have Bolt Sopmod version and have done some modifications to its internals.

    At first it caused me lot of headache, as it was shooting semi only. Well, finally noticed that selector plate was modded so it would not move cut-off arm. I bought the gun from Germany, and due their laws here it was modded by Bolt to fulfill the laws... I was not aware that law, and it took while to find the small mod done to selector plate. I replaced plate with old unknown maker plate and now it rocks happily.

     

    My friend did a metal spring guide from old metallic non-bearing, basically it was just drill a hole through it. Before that we tried to drill a bigger hole to spring guide with bearings, only to found that its bearings inner diameter are just 7mm... And we were after that size hole, so guide snapped. :P

    I filed down the second teeth from the piston, just to be sure. 

    Oh, and I put the Gate PicoSSR 2 mosfet inside the gearbox. That fet is amazing small, and fit to space where wires come inside box. No need to more wires outside the box  :)

    Also I changed the wires to better, if I remember right they are now non silicon AVG18.

    I the first or maybe second game the fake bolt carriers actuator arm broke. I had assembled it wrong and it stuck when returning back to front position. Next cycle snapped arm clearly and it was later found inside the box. My friend machined new one from steel, and it is again functioning. 

     

    Gun shoot a little too powerful with 1,69J (130m/s with 0.2g) so I replaced the original spring with M115 spring. Now it shoots around 120m/s.

     

    Lastly I replaced the regular ris with Iron Airsoft URX4 13". Bad pictures here: http://arniesairsoft.co.uk/forums/index.php?/topic/197001-ar15-variants-and-derivitives-picture-thread/?p=2652247

    Love how light the URX4 is! 

     

    Otherwise really nice gun, blowback is so nice that I doubt I will newer buy any new gun without one. 

    I'm running 11.1V lipo in it, and now I think 7,4V would be safer. What you think?

  22. Airsoft in inclement weather

    in Game & Events

    Posted · Edited by Mazor

    Some pics from our last little operation. Our objective was to gather intel from 2 spots while evading opfor and then do strike to objective that may be found using this intel. It was really nice day, we walked some 10 km in knee deep snow :)

    Im on left, looking so weird...

    http://gallery.jvisoft.net/var/albums/Skenaariot/Muiden-j%C3%A4rjest%C3%A4jien-skenaariot/Operaatio-Lumikko-2013/2013-02-02%2009_23_05.jpg?m=1359913196

     

    Sun shines, time to take pretty pictures!

    http://gallery.jvisoft.net/var/albums/Skenaariot/Muiden-j%C3%A4rjest%C3%A4jien-skenaariot/Operaatio-Lumikko-2013/IMG_1443.JPG?m=1359913272

     

    Planning the route:

    http://gallery.jvisoft.net/var/albums/Skenaariot/Muiden-j%C3%A4rjest%C3%A4jien-skenaariot/Operaatio-Lumikko-2013/IMG_1448.JPG?m=1359913278

     

    I'm the last man,  keeping watch on our tail:

    http://gallery.jvisoft.net/var/albums/Skenaariot/Muiden-j%C3%A4rjest%C3%A4jien-skenaariot/Operaatio-Lumikko-2013/WP_000108.jpg?m=1359915524

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.

  I accept