Jump to content

vietnammarine

Regular Poster
  • Content Count

    108
  • Joined

  • Last visited

  • Days Won

    36

Everything posted by vietnammarine

  1. Last weekend I have finally finished also my T44E4 rifle: - WE M14 gbb w/ modified flashider, gas chamber, bolt lock, receiver - USGI M14 early stock (not 100% correct) - SA M1A wooden handguard - USGI M14 barrel band - USGI M1 Garand buttplate - USGI sling - Internals fixed and tuned to 3.5J w/ .50 BBs. Sent from my iPhone using Tapatalk
  2. Tried to make an art picture of my Guarder MEU SOC, Inokatsu M1911A1 and Pi July's M1911. My skills suck[emoji23] But main point is the question. Is there perhaps any Marui/KJ compatible slide & frame kit for Remington Rand, Ithaca or US&S M1911 at all? Sent from my iPhone using Tapatalk
  3. Yes[emoji6] Sent from my iPhone using Tapatalk
  4. Quite a difficult task to source the parts. I was not expecting to even get some of them. Luckily and by coincidence I was able to get the most unique once at military show in Germany before covid has closed everything. Sent from my iPhone using Tapatalk
  5. Difficult to say, I like all three of them - Shadow 2, 1 and P09. Good shooters, reliable and mag options (GG and CO2) without upgrade needed. Shadows are of course heavier than P09. Nevertheless if should choose just one - Shadow 2. But P09 is a bit more military if that plays a role for you. Sent from my iPhone using Tapatalk
  6. M14 Sniper Rifle (1967, pre-XM21) - base WE M14 GBB (No.9) - USGI M84 optic sights from Garand M1D - USGI AWC mount base - USGI Griffin & Howe mount for USMC Garand MC1 (to be replaced by G&H for Garand M1C) - USGI complete stovk and barrel band - USGI selector lock - USGI National Match front and rear sights - USGI leather cheekpad for Garand M1C/D and MC1 - USGI M1907 sling
  7. Additional two of my M14s are almost finished: M1A-A1 (SEAL - VBSS Sniper Rifle) - base is WE M14 GBB (No. 8 ) - Aimpoint 3000 (year 1989) with mount - folding stock from FPR - USGI M14 National Match front and rear sights - USGI M14 barrel band for proper position of barrel (WE's lower) - USGI M14 selector lock - USGI nylon sling from 70s Sent from my iPhone using Tapatalk
  8. My latest acquisition - custom built from Taiwan: M1911 No.33 Sent from my iPhone using Tapatalk
  9. I had no idea that UHC has made guns for MGC until I have found this pistol few months ago. I remember my brother used to have UHC's manual M1911A1 more than 20 years ago. As I remember it was quite hard hitting compared to my Academy M16A1 or pair of M1911 Commanders, which I don't remember the origin of. Sent from my iPhone using Tapatalk
  10. Scored this MGC NBB 1911 in our local airsoft shop. Sent from my iPhone using Tapatalk
  11. VFC and real one fits. G&P and it's chinese clones need some work for rear fit and rear mounting point(s). Sent from my iPhone using Tapatalk
  12. Hohoho, supernice!!! One of my favourite guns. Sent from my iPhone using Tapatalk
  13. Has anybody got the Mafio(so) M1928 steel kit here? Sent from my iPhone using Tapatalk
  14. My new Guarder-TM MEU(SOC): Sent from my iPhone using Tapatalk
  15. My SIG is finished, just 5 or 6 Marui parts have remained in this built. I love the new fake firing pin the most [emoji23] Sent from my iPhone using Tapatalk
  16. I wanted P226 for a very long time, it is one of my favourite pistols, but never bought one from some reason... till now :-D And I like it... a lot. Sent from my iPhone using Tapatalk
  17. So my TM/Guarder P226 is finished, until the few remaining inner parts and grips come. I have to say I am really pleased with the semi-result, the look and performance on MAPP are just great. Sent from my iPhone using Tapatalk
  18. Yeah, I have just ordered all the missing Guarder parts...and also similar sets for TM M1911 MEU and M9 [emoji1787] Wonder if they are on stock though. Sent from my iPhone using Tapatalk
  19. Decided to built me a Marui based SIG... some parts fot complete Guarder built are missing in my local shop so need to wait for re-stock. Sent from my iPhone using Tapatalk
  20. Has anybody done some real bucking vs bucking comparison between VSR type ML 2021 Autobot (antifreez???), original Autobot and the old Diamond? I was testing Autobot 2021 last weekend and have to say was quite impressed by it's cold weather performance. But I am not sure if it is really better or just "my wish". Also these new buckings seem to be a step softer compared to original autobots. Dimitri MdP maybe? Sent from my iPhone using Tapatalk
  21. I also didn't want to have anything with VFC's gbb after my painful MP7 experience. But got their G3 and UMP, which are in my opinion some of the very few best gbbs out of the box. Just take out and shoot, shoot, shoot... I was really amazed and pleasantly surprised. I will not get PSG, but FAL Delux for sure. Sent from my iPhone using Tapatalk
  22. It was a beautiful piece, shooting quite well, but overall useless for my collection and more importantly I was in a quick need of money for our dogs operation...the most expensive toys ... of my wife, thus mine :-D Sent from my iPhone using Tapatalk
  23. And few I do not own anymore: NE Sten MkII Tanaka K98k Sent from my iPhone using Tapatalk
  24. You are absolutely right with the need of new WW2 guns picture thread and both of yours are amazing kivk offs. I was not even aware there is such Tanaka and Unertl repro scope. Giving me an idea for my own 1903 conversion [emoji6] And let me share some of mine WW2 / Korea toys... 2 of 3 8mm Marushin Garands (3rd will be - one day, a donor for my BM59 built) - one Garand is regular for my Marine Recon impression. - 2nd Garand will become M1D Carbines are 6mm King Arms and 8mm Marushin. Inokatsu M1911A WE M1A1 with USGI wood set. S&W Beretta M1938 Hudson and S&W M3A1 Sent
  25. Beautifull Asahi, the only gun I want and be fine with HPA. M14s...eeergh, I think 10 by now. But need few more[emoji23] Sent from my iPhone using Tapatalk
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.