Connery

That's odd, because Power Edge USA has them in stock. PROTIP: Seems like they've only got 3, so get it while you can. I'll be off having fun with my KSC one, until the nozzle cracks.

Yes, they require a bit of force.

It is possible, it's just not going to be as effective. You really should completely take the bolt out, and it's really simple, just follow Redwolf's guide in getting the bolt out. Keeping the hammer down is as simple as not pulling the trigger while the bolt is out of the gun. Once the bolt is out, just pull the cylinder forward so that the piston cup is visible, and spray away.

That's what Duckling and I were talking about. Rocket valve won't change the problem with the nozzle.

Correct, just replace the current aluminum rocket valve in the KSC MP7 with an OEM KSC/KWA Glock/System 7 plastic rocket valve, and it will be shooting +/- 400fps on Green Gas.

Ah, yeah, just thought about that, all the valve is doing is allowing a higher volume of air to actually push the round. Oops, wasn't thinking logically!

Rocket Valve I replaced in mine is OEM KWA Glock. Haven't tried a HurricanE High-Flow valve yet, that's my next step. Waiting to get replacement nozzles before I start stress testing, but I'm going to assume the stock KSC Rocket Valve is restricting the amount of gas going through the nozzle, which in turn is backing up the gas, and it's got to go somewhere.

Don't mind me, just confirming Duckling's theory. Shot at room temperature with KSC .2g BBs and UHC Power Green Gas. EDIT: For what it's worth, that piece is called the Rocket Valve.

Sorry, I forgot to take pictures yesterday. Forgive the quality too, had to use my phone. It lines up good, but you still can't use the pistol sights.

I'll take pics tomorrow with the medium mount so you can see exactly how it looks.

Anybody who tells you KSC and KWA are different are just blowing steam out their *albatross*. KSC is the marketed for Japan version, KWA is the marketed for everyone else version. That's the reason the KSC USP has a plastic slide with trademarks, and the KWA USP has a metal slide that is blank. And for the record, I've seen KWA NS2 nozzles blow in their 1911 series quite easily, so if KWA even tries to say that they're different, then I don't know what to say to that.

Those are the estimated numbers from the factory, not the actual numbers that the gun fires. Mine is only topping out at 330fps on green gas as well. Slightly disappointing, considering the USP Match does indeed fire at 375fps, and the barrel length is the same, if not longer than the USP Match!

I just did it to do it. Supposedly, you get better gas consumption out of the Hardkick system than you do the Non-Hardkick, so I'm noticing that the Non-Hardkick system is shooting harder (for me, at least). I just figured, "Well, I have 4 Non-Hardkick TMPs, why don't I just switch over the guts into the MP9 because I'm super bored today?"

For what it's worth, everything is identical to the TMP/SPP of years past. I was so bored the other night, I swapped over the internals from one of my Non-Hardkick TMPs into the MP9, and it worked with no issues.

I like it, it's good. Can't tell durability yet, I just got it yesterday. Once I figure out how to get the muzzle off, I'm going to transfer over the Non-Hardkick internals from one of the TMPs not pictured.

No problem, your English comprehension is actually a lot better than a lot of English/Americans on this board! Try sending The AUGfather or beretta a message, they've shown pictures of their AUGs with the magwell conversion already done a couple pages back.

I don't mean to be rude, but...

Brilliant. You should send the idea to Steyr. EDIT: You could name it the AUG-V8.

Now now, simmer down. No need to stoop to his level, he's just going to beat you with experience. trevdor, have you thought about using a Grip-pod? EDIT: That's beautifully ugly, Victory. I suggest you do it.

Sounds like an answer to me, Hedge.

Because he wants his gun to be unique as opposed to 'the same thing everyone else has', I'd figure. Hence why it's a custom, not a replica.

I can change it if you send me your most secret bank account informations.

Swerve: If you can't handle the hate, don't dish it. That's all that's going on right now. Basically, case of the bully who beats up on other kids, but as soon as one kid stands up to himself and socks the bully in the jaw, the kid gets suspended while the bully is free to terrorize others. Badger: If you read from page 44, you'll see that evo12 is just standing up for the other people who weren't brave enough to stand up to a bully. He's making their voices heard that 'just because you don't like my gun doesn't give you the right to tell me it's disgusting and that yours is the Holy G