yanng

Hello, Please excuse me if I'm wrong but I think it is a 30 round magazine just like the others and uncompany did make a mistake. I just checked the list of the WE magazines on unco and they aren't selling the 30 rounds ones. No one else has ever spoken about 50 rounds magazines, I think it is just a little error ....

@rottenotto : Do you still have the part n°37 ? Maybe your gas system isn't centered inside the cylinder and this would be why your part n°122 is wearing out so fast. The small oring n°37 corrects and recenters the gas system, but it is a very bad way to do this. It looks like a cheap fix. I hope there will be some replacement parts that will actually center the gas system. My washer was pretty worn out when I received the gun but I was able to fire 2000 rounds and it still fires fine but I will replace it asap.

Slu is faster The bolt carrier is made out of steel ( magnet test ). After 500 rounds, mine never jammed but the bolt doesn't always stops, it seems the bolt catch isn't pushed far enough by the part inside the magazine. Still no wear on the bolt catch or the bolt carrier or other vital components. But the bolt carrier scratches the ouside of my cylinder, so no operating problems but I wanted to know if this happened to the other owners of this gun ? I doubt it scratched it when firing because it cycles very well, maybe when removing the bolt assembly.

I ordered mine at wgc ( afc version ) and it has the steel bolt catch. I tested it with a magnet : http://picasaweb.google.fr/yanngx/WeAfcM4a1# . @OKane22 : green gas shoots harder ( this gun needs it, the bolt assembly weights 250g and look how far it travels ! ) and doesn't cools down as fast as other gasses so you will get your 60 shots but the temperature is also a major factor ( no problem on semi at 6°C but 20°C are needed for extended burst with a great rof ). I encountered the firing pin issue and I found out that the gun needs to be cocked before inserting the magazine a

I tested it outside ( 6°C ), works well and the bolt stopped when the mag was empty. I also got some good trajectory and it seems my M4 does have a softer hop up rubber made for lower fps settings ( my version shoots at 350fps or something similar ). I tested it with excell 0.23g and the bbs are falling at 30m, with more hop up this thing would have a range similar to a good aeg. But the hop up ajustment ring is still difficult to turn so I can't have a perfect trajectory. Among my 4 magazines only one does have a problem, the bolt stop feature doesn't work on it, and it also lea

Thanks slu for point out the weak points of previous versions so I can compare. @ The Chef : you should better read this topic : http://www.gasguns.info/forum/viewtopic.php?f=7&t=154 only 14 pages and it contains all the informations you could find here. I agree someone should make a big review of this gun ( I would be glad if I could help, since English isn't my first language well my review wouldn't be top notch ). @Chevieblazer : I will testfire the beast outside tomorrow but the weather is quiet warm for this period of the year ( around 8°C ), but Lupus tested it in col

Hello guys, I just received mine today, so it's a brand new version with ........... STEEL bolt catch and it seems the bolt carrier is also made out of steel ( just tested them with a magnet ). It's the afc version ( anodised and grey ), the markings are very well made. The paintjob is quiet good ( noticed a few litlle scratches on the receiver ). I just tested it and it works well, but it seems the rof is slower compared to many videos on youtube ( 21°C on green gas ), maybe because the bolt is heavier or maybe because it's quiet dirty with some heavy grease. Like

You should better buy the begadi green gas instead of the medium one. I tested the medium with my TM hi capa, the first shot is quiet strong but this gas cools down very quickly ( even at 20°C ). After 3 shots, the cycling was poor and there was no kick. Their green gas is much better, same power as the HFC green gas but without his horrible smell.

Hi guys, I just checked WGC and they have the spare mags ( same price as AB ) they also added 2 other versions of this M4 : one with some special markings and the other is called HK version ( I though it was the only version they ever had ). But anyway I will order mine from AB because of his awesome customer service, I emailed him and he told me he could help me to reduce the power down to 350fps ( probably by placing the white rubber in the nozzle ). 430$ for the m4 + another magazine + shipping included is a very good price