hkssr20det

MGC Glock 17 Seidler Custom

Top - TM Leon Bottom - SIIS

KSC Glock 19 Deep Blue

I finally secured my latest project, actually I just had parts lying around that needed a gun to add to. KSC Glock 19 Deep Blue PDI 6.01mm Tight Bore PGC Hi Flow Valve KM Stainless Recoil Guide Rod & Recoil Spring Very light tune. I actually have a BoomArms slide for it, but the thing is bothering me since the outer barrel legs don't fit the slide....incredibly annoying. I haven't the patience to work on it right now, so I am rocking the ABS slide for now. The Deep Blue coating is some limited edition from Japan, but really just makes the gun look more like plastic tha

Rom shoots his guns, believe you me. I fit the Beavertail and it was a solid few hours of grinding and test fitting. Of course it does look good....probably worth it.

SIIS is a Taiwanese brand using a licensed Magna Blowback and it is all ABS. It is not as good as the TM in almost every way but it is more powerful. Yes it will shoot over 400, and since the Leon uses a stock length inner barrel (I have one right now) it won't get close. Now when I swap in the 10" KM barrel....I bet the TM will beat the SIIS.

I dropped some more ideas in the thread on ASB. These are the joys of working with GBBs, but everything you learn with this build can be applied (in the broadest sense) to the next one and the next one. Almost anyone can swap parts, but the actual fitting (or tuning as I like to blow it up to be) is where the skill and the experience comes into play. Welcome to the club (or mental ward) and I am glad this experience hasn't turned you off, just inspired you to keep going.

I don't really know about the strength when it comes to a race holster, haven't bought one yet, but the left side has my initials stippled in.

Swapped out the PDI hammer set for the Airsoft Surgeon set: Now I need to figure out which set-up is better.

The blowback nozzle and floating valve are much closer to the design of the Glock. No more metal loading thingee and idiot valve system. Now the piston in the BBU is the upgraded green unit from the M9 PTP (both series of 1911 do have this bbu design). The mag has some black magic, voodoo spirit in it. I tested the old version and this one back to back, and wherever the new mag went, 20 fps came with it. In terms of releases outside the US, I can't honestly say. I assume the full metal KSC versions include this upgrade (the full metal KSC M9s are the PTP), but the price on them

Field Stripping As mentioned before, the KWA can be field stripped almost exactly like a real steel 1911. As always, first remove the magazine and be sure no “rounds” are chambered. Then pull the slide back until the right edge of the slide stop meets up with the second notch to the rear in the slide (half moon shaped). Once you have that lined up, push the slide stop out gently, by applying pressure to the post through the frame. If everything is lined up, the slide stop will pop out, and you can gently push the entire slide assembly off of the frame. Moving

Features Controls KWA has chosen to replicate the classic A1 styled WWII 1911, and the controls fit to the gun match this. The trigger is a short checkered example with a matching checkered mag catch. The thumb safety is a single side affair, with a standard grip safety and military hammer, no fancy-schmancy ambi-safeties and beavertail grip safeties. The KWA is a no frills model. Continuing with the theme, KWA has fitted this gun with curved main spring housing with a light checkering. The original 1911 came with a flat MSH, but true to A1 form, the KWA makes d

KWA 1911 (New Structure/Full) Introduction Up for review this time is the KWA 1911, here for the second time, this time with both full metal construction and an improved magazine. I used up most of my prose introducing the original version (which you can read here) but in the world of semi-automatic firearms, and thus in the world of airsoft GBBs, there is one classic and that is the 1911. In continuous use around the world for over 100 years, the 1911 has been released by almost every airsoft manufacturer that dabbles in gas blowbacks. On the market today there are Maru

Interim look. Need new grips, and hopefully a new frame soon. New AS Hammer in the mail.

I fit a slide stop and MSH to a PGC body. The slide stop was pretty tight, but nothing a little sanding (and I mean a little) couldn't fix. The MSH actually slotted in without a hitch. Can't comment on the safeties though, never fit them.

The Delta should work with a beavertail as well. It is the height of the A1 that gets in the way. Duck tail and beavertail grip safeties should clear almost all hammers.

Chairsoft Custom Works X Pinnacle Airsoft X Raptor Packs TM AK74M (blowback w/ recoil engine) Guarder SP110 Spring Systema Spring Guide w. Bearings (V3, modified by Pinnacle to work) Prometheus 6.03mm Tight Bore (455mm) Raptor Pack 30C Discharge 9.6V Mini (custom fit to battery compartment by Pinnacle Airsoft) PDI Flash hider (which is wrong for the barrel, I know) Kobra side mounted red dot (RS) Chrono: XCortech Chrono, Toytec .20 bbs 1 - 408.4 2 - 407.7 3 - 404.6 4 - 406.8 5 - 402.9 6 - 410.2 7 - 395.7 8 - 407.3 9 - 407.9 10 - 406.4 Avg: 4

The Delta was made to fit the A1 safety. Certain other ones do clear it like, the Commander Race version Krame is running (though he can change to anything he wants now).

Sounds like an SVI....I wonder if you could fix it with PGC mag lips for a SVI....you sent it back already right?

Just looks awesome man. Love the hammer most of all.

That is wood stippling. Always wanted a set of those grips but when I got around to trying to buy them, they where sold out.

I honestly don't know. I have never seen a version 2 KSC in person. If what we know about Glocks holds true, then yes, but KWA USA is trying to do some of their own stuff. The full metal gun does shoot noticeably harder than any other KWA I have shot (4 or 5 now) so they did upgrade something in the mag (probably the valve) to gain an extra 20 fps. Tested it in my buddies metal slide version and his picked up the missing 20 fps.