chris u'5

I wasn't suggesting you were lying Midma.

Exactly what you are doing. Contact the retailer you purchased it from. There is no doubt though that externally many of the WE M4s that have been purchased are in far from perfect condition. Perhaps on some occasions this is to do with retailers but the same cosmetic faults can be seen on many of these rifles that have been purchased by people from all corners of the Globe. So to say "this has NOTHING to do with anything in the factory" is kinda hard to believe, of course on this occasion with Midma's rifle this may be true (it may the responsibility of the retailer) but it is qui

Agreed. The Wiki guide contains pretty much everything you need to know when you are getting started. Consider it your Bible

If I were you I would send him the pictures. I know it would be a hassle sending the whole rifle back from France to HK but he should really hook you up with a new magazine and forward assist.

Where did you buy it from Midma?

Thanks guys @Tengar It was my intention to include a picture of the handle installed, sorry about that. @4boost/rottenotto I received your PM 4boost. I understand now how I should upload it to site but I'm not great with computers! I'll give it a go though. I've Pmd you otto.

Thank you very much Gaz

I've just posted my review of the Horizon Tactical 'real steel' modified charging handle. Horizon Charging Handle Review I hope you find it useful.

Those of us lucky enough to own the WE M4 will know that it is a fantastic rifle but as with most things in life it isn't without its problems. One of the most commonly reported failures is to do with the weak material used in the stock charging handle and the tendency for the handle to snap. This was a problem which I was quite concerned with which led me to be extra cautious when operating this part and I felt this detracted slightly from my enjoyment when using the rifle. Therefore I was delighted when I stumbled across Horizon Tactical and their modified 'real steel' charging handle. To

Well I was a bit disappointed with the initial condition of mine. Lots of wee marks and scratches all over the receiver, all stuff that would probably happen anyway but a bit annoying. Plus the forward assist was missing and on closer inspection I discovered the forward assist spring was missing too! The guy in factory who was responsible for that part was slacking that day EDIT. On another note I have decided to attempt the inner barrel change for the first time today. Is it just me or is really tough to get the short barrel back into place?

Bloody hell mate! You're not having much luck at the moment

Bloody hell Gaz! Are you sure that AK is airsoft?

@accuracy I have a some weird marks on mine too. Not as bad as yours but disappointing nonetheless! Not ideal but Horizon Tactical will be stocking replacement receivers soon apparently. In regards to TS One, I fear they may have damaged their reputation beyond repair, you really have to ask if they ever tested or inspected any of the products they have released. What happened to them posting directly here plus they were supposed to show us a video to prove that their buffer tube was effective

Wow! That really is quite unbelievable

Mmm...well I'm kinda annoyed now! I wish I never asked

I was just thinking exactly the same thing! When I first received mine it had quite a few scratches and marks plus paint loss on some of the furniture I wasn't really that bothered but the condition of the receiver was pretty poor in comparison to all my AEGs when first purchased. So was this the same with everyones WE M4 then?

I can't get mine off either!

So were you trying to turn in the correct way then w0lfy? Thanks to Chris and Carsten by the way. I got the pin out (it was a *badgeress*!) I just need to buy a replacement spring now so I've not put it all the way in again as I will only have to get the bloody thing out again

That's brilliant. Thank you guys. One more question please If you don't have any 1500 grit sandpaper to smooth down the brass cylinder opening is it still worth using Loctite to secure part 36 in the meantime? (It'll be next week before we can get some 1500 grit)

Well I finally had a look at my buddy's rifle with the missing forward assist button and I've stripped the rifle and the spring from the forward assist assembly is also missing! I managed to buy a complete forward assist assembly replacement for him but at the time I didn't realise the spring wasn't there either! Another part to buy Anywho, can anyone tell me how to remove the forward assist from the rifle? I can't get it out, I presume the small pin in the upper receiver around that area has something to do with it but I've tried punching it out and it isn't budging. I don't want to for

Personally I think it's a really good idea and I would definitely take part but there is no doubt that it would be a bit of a hassle to organise as there will always be people that'll mess you around.

Good work IBICO! This will prove to be very useful. You're a dedicated man

Mmm...I think I kinda I like it! It's certainly different and the 'battle wear' on the buttstock and receiver looks amazing. In that respect it's probably the most realistic airsoft AK I have ever had the pleasure to view! Perhaps it would be better without the rail? I dunno, I'm no AK expert (I do like AKs with modern optics though) After watching an episode of The Unit I've always wanted an AK like that (minus the rail and EOTech) but with a KAC QD Silencer. I know it's not for the purists but I quite like the mix of old and new.

Agreed! I actually saw some pics recently of a US Army M4 and it looked amazingly similar to your M4 Did you do anything in particular to achieve that look or did you just use it

I'm not usually a huge fan of stippled Glocks but I really like your design. It reminds me of something but I can't put my finger on it! Edit. I got it!! It looks like chainmail armour http://www.raisonsbrassband.com/images/cha...0for%20ebay.jpg