Ledpocket

Clone PDW with a new ultra short barrel.

Recent addition :-)

If you mean me, thanks. But 2 seconds after I posted the pics, I was on boomarms and saw the new rcp kit for $650. About $400 less than the kit I bought a year and a half ago, and appears to only be missing the grips.

Kimber RCP built from a WA officer... Kimber Ultra Carry with homemade rcp grip...again, built from WA

Hey gents, Here's a custom shorty AK I did a while back

A little late on the draw, but my chopped up maruzen is an 1100 semi auto. No pumping required. Also, no shells, it is mag fed.

I sold that one a while back. Kovacs has it, and I'm pretty sure he just got done "blackening" it up.

6mm Here's another pic or 2

LOL Thanks again. If it was real steel you'd get 2 in the the and 1 in the chamber. Same thing with the Serbu super shorty. Really only useful for home defense and drug deals My airsoft version uses 18 round mags, so I could chop it at the receiver and still have the same shots. It's the old defender 1100 semi auto gbb, not the newer shell fed version. For anyone not aware, it has 2 interchangeable chambers. One allows 3 bbs per trigger pull, the other shoots 1 bb at a time.

Thanks guys. It's mad-dog-bad-assilicious I got about halfway done shortening the stock this morning, but my wife made me stop and go to work

Thanks! I still need to trim a bit off the stock to even it up with the front end when it's folded. I'm pretty happy with this one. Have another pic!

Maruzen mag fed defender...as usual, chopped

A Blast.

Those are r/s I think http://www.athenswater.com/my_weapons.htm

Thanks again! Kart EBR was the starting point. I probably won't be doing any more of these. It was VERY time consuming compared to most of my projects. Some detail on how I did it was added here: http://www.arniesairsoft.co.uk/forums/inde...t&p=1764539

Thanks!

It's a little drafty. Next time you're in town, stop over and try it out

Small, smaller, smallest. M14 EBR shorty project compared to a full size. 1st, set for a mini then chopped more for a lipo: interim stock: Finally shaved another inch off the front: Compared to an unmodded ebr:

Evolution of a chopped SIR M4:

Painted up this old thing:

China clone 8mm chopped to 10" barrel: (Old marushin 6mm serbu mod shown for comparison) prior to paint: in pieces: As purchased:

Homemade modification of WA ser80 officer grips (exactly the same ones seen on the 2 tone in the 2nd pic) If you look closely, you'll see where I filled in the counterbore that holds the colt medallion (still needs a bit of putty and sanding to blend it in) edit:speeeling and Thanks

I took some fresh pics of my Kimber micros. Working on the RCP II

Correct on the matte-ness. The new UC2 is extremely matte. It appears to be lightly sandblasted prior to anodize. This results in leaving a bit of skin on the parts when you handle them. The fitting went very well. The slide was tight, but the rest went together without needing any filing/fitting. As opposed to the cdp which required a bit of polish for almost every part. Another nice touch was the grip bushings are threaded for real steel bushings. The R/S Chip McCormick ultra slim grips installed effortlessly. Also redesigned is the housing that holds the slidestop/safte

The kimbers are prime/boomarms kits. Officer frame with short dustcover and micro slide. Both are the same size, the angle of the pic and the color of the guns make them look different. The WE is actually officer sized, it just looks huge in comparison.