rallymad_nad

Last post nearly 10 years ago. I'm just waiting for Facebook to die and forums to make a comeback!

Right, regardless of the DIY mods, when purchasing a new open bolt Scar, what other bits are recommended to fit from new, or is it a case of just replace when broken? Secondly, where can these bits be had from. The TSC hammer seems sold out at most places. Thanks Nad

Right, been reading round and really interested in a Scar GBBR. Fancy a change, got tired of playing around with the internals of my elec guns. I've read through most of what I can find but would like some things clarifying. I assume there is now a latest version of this platform, how will I ensure I get this version and how different is it from the earliest models? Did they start from a certain serial number? In relation to upgrades, are the ones listed below still required on the latest versions and what other tweaks are needed? I found the WEM4 wiki, just wondering which twea

Well they were only taken with a phone and a diffused light, no flash used. It was only a quick idea while I was cleaning it. If I was really that bothered would have popped down to the photography lab but the UK isnt exactly gun friendly so I cant just go there and start photographing guns etc. There is a model gun section in the reviews but not sure elsewhere. I couldnt care less if ppl want to use it or not, was just an idea. Anyway point made, no point wasting bandwidth so I'll remove them.

Well took me a while to strip down and lay out so thought an 1911 lover would like it. If you can find another relevant thread I'll stick it in it.

Not sure if this is of any interest to anyone for wallpaper etc. Im sure one of the photoshop whizz's could add on an extra two cartridges and play with the colours etc. L8rs Nad

After shooting on a sheltered range with .2's and .25's in a modified VSR, the .25's did travel the last leg flatter and you could hear that when they hit the target they had a lot more force behind them still. I would have liked to try this in the AEG's but didnt have enough ammo. L8rs Nad

Couldnt you just get the standard one and remove the internal bits?

Cool a car with so much electronics that as soon as you try driving it like you would do a 'proper' car it crashes for you. Reminds me why the RS Diffs are so sought after. Nad

And adjusted to right length by some Not sure why it is how it is because the flashider is even threaded all the way inside yet the outer barrel wont let it sit on far enough unless modified. Cant remember what measurements I took off what, looks close enough for me. Nad

And adjusted to right length by some

It also comes off when u try to wind the long screws used for mounting the sling hooks all the way in the front holes when putting rails on and u dont have enough short screws.... Nad

I was waiting for someone to notice that, but the fact that 5.56 goes down 9 a lot better than 9 down 5.56, I can see how it would be an issue When its screwed on properly u cant see it anyway as it faces the bottom. Only reason it is there is to cover the barrel and was the cheapest one I could get that fits, simple as really. Nad P.S. That and it fits my MP5, which would be the right caliber. Why carry 2 when 1 fits both

Well as the UK has limits, apart from upgrading the internals inc barrel for tighter one etc what else can u do that isnt bolted onto the gun? What is the point to stronger gears etc? A sight has more use that a fancy slide etc. Most things are 'bolted' to or attached to the gun incl different stocks grips RIS etc. Most are just RS replacements which cost more but what is the point. Apart from making it look nicer. I brought mine to perform, not to look nice. Depends which side of the fence ur on I suppose. And tbh I wish mine cost a lot less, some of the prices for bits are a right rip o

Yeah I remember u saying that before, had taken a photo of the 3 straps to see which one you thought was best but never got round to posting it. TBH I had one on at first but found it hung too far away from my body.... and bits flapping around Will try it out tomoz again. Nad P.S. Thanks Firefox

As on the MP5 and G36 threads: Shows gun modified to correct length Nad

CA G36K KA HK Silencer Prometheus 6.03 barrel TM Rubberised vert grip GRS Lower rail Streamlight M6 Guarder Tac Sling TM Handguard, upper rail and front sling mount KA Scope mount Guarder Aimpoint CA Low Cap Around $1378 rrp, think I got it all together for a little less with some shopping around.

Few new bits including KA HK Silencer just to cover inner barrel, had to mod TM handguard to fit it properly, also got new mags as well. Nad

Just takes some time with a lathe, dremel, file and some time. Just need to get some Matt black paint to finish it off. Never did find the proper length for the flashider so just guessed. Ended up at 70mm in the end. Couldnt take anymore off the outer barrel extension without having a new thread cut which would have ended up costing me money I havent got rather than getting it done for free so the extra 1mm can stay Nad

Standard with a few tweaks.

Just for Uni, spot the difference Came with a burnt finger though L8rs Nad P.S. Thats 861 mm, close enough I say

Ah that would be why u said it was a wise choice before I purchased it then. Does the ARMS #22 come with set of spacers as well to offer adjustment then? Nad

That ARMS #22 mount looks like my KA one

What conversion kit is that?

Lol I only spent all afternoon swappin bits over and takin pics because you said that about the M6 lol that and it cost so much may as well show it off. U lost me a bit on the second bit. Which G36 muzzle?? The barrel extension does unscrew off the gun, and the flashider off the extension. I say this as I just went to take the flashider off and for the first time the extension unscrewed lol. Im not paying $50 for a flashider, thats daylight robbery!! Cant I just cut mine down to size?? How long is it meant to be?? Also what do you think of this, will it fit over the barrel??