Livoniairsoft

KSC M9 V2 Owners beware. Here is a side by side comparison of my destroyed V2 recoil guide base and the V1, a more robust piece. My Version 2 still works fine with the part removed, but there is slop in the outer barrel when the slide is locked back.

Just screwing around with the camera.

Here are my KSC M9's. I figured they may be worthy, however I've never taken photography class. They aren't perfect.

I believe they may have completely fixed it because I have used my V.2 much more often and never had it happen.

The safety on the KSC/KWA's aren't the best. Apparently they tried clearing up the problems with the V.2, but comparing my two it seems like they didn't fix anything except the screw design. I take the mag out, lock back the slide then put on the safe. When you close the slide the hammer will decock, I found that is the most efficient way to clear an M9. When you hear that little surge of gas and a bb is in the chamber it will fire, this is why you want to take the magazine out before the hammer decocks. I have had safety malfunctions before with my V.1 causing it to misfire, no

Thanks man, I was really surprised how well they came out but it seems they could have been focused better. Ive still got some more things to do with my Suppressed one, I'm thinking Hogue grips and a lower rail with a M3 light. I will use my metal one in the summer as a sidearm for my rifle and the abs one in CQB, since the metal one shoots 360fps. If anyone would like to touch them up in Photoshop I would appreciate it. In the last picture the harsh light on the suppressor could be toned down and the white lettering brought out.

My old pictures have vanished, so here is an Update. KSC Twins. Version 2 Full metal -Super Enhanced Recoil Spring -Extra Mag Version 1 ABS HW -Enhanced Recoil Spring -G&G Threaded Outer Barrel -NiteSights -Nineball Tightbore -KA AAC 9mm Suppressor. Ive never taken photo class, so don't flame.

The hammer assembly and spring guide are the same, but the new one has a better feeding system that calls for a different outer barrel. The inner barrel is different too, I haven't taken it apart, but the tip of it is fully round not slotted to fit into the outer barrel. The outer barrel on the Full Metal is plastic and the slide is made of a super light metal. Feels like plastic at first. I bought my Full metal one and the G&G outer at the same time coming to find out the new outer barrel was completely different ticked me off. I ended up buying my friends M9Hw off him and thr

KSC M9 HW -NineBall tightbore -King arms AAC suppressor -G&G threaded barrel KSC M9 Gen2 Full metal -Extra Mag Comes 340fps

Suppressed KSC M9: G&G threaded outer Nineball tightbore KA AAC suppressor Unsuppressed KSC M9: Gen 2 full metal Extra mag

Well, I decided to trade my old 87' 944 plus some cash for this 1991 Porsche 944 S2. Twin cam 3.0L Inline 4 85,000 miles 210rwhp 205tq 2880lbs Brembo brakes Much better suspension than the old one Only 510 imported into America Here is the old one.

It shoots 545 with a .20g. BB of choice are Straight .43's & .36's A comfortable effective range I can hit someone at is around 80 yards, this is with no lob. Roughly 105 yards maximum range. I haven't fully tested the grouping with my 650mm, but it was 5" @ 73 yards with my old 590mm. It is very long I know, but totally necessary and will out range any AEG on the field. Its not my fault the barrel runs half way through the suppressor

Some really nice replicas all around. About $1600 so far and not afraid to get it dirty. Maruzen Tye 96 Everything internally upgraded Fiberglass coated stock 650mm tightbore Mojji Killer Elite Pro Scope Fluted barrel

They shoot solid out of the box, with a high flow and hammer spring its upwards 380-400fps. Very accurate and very quiet. I know you can get tightbores for them too.

Yeah, just a TM Mk23 with some internal goodies.

A modified Systema right now, need to be a little skinnier to fit in the hopup. The bucking on these guns are trash, I'm trying to innovate a little and see what I come up with. Ive got a rail mount for it, except nothing to mount on it yet. Looking for a little reflex sight.

Just a little something.

Just a little something I made, got bored with it. Needs some polished looking paint and it will be all set. Tanaka M500, 9" Tightbore. 470fps.

My old KSC M9 I had with a few upgrades, nothing special. I'm looking into one of the new all metal M9 to turn into a comp pistol.

Michigan rules are 550 limit for rifles usually, we play just a little hotter on our teams field because its bigger and calls for longer shots. My teamate did build a 720fps Mechbox for a guy in South Carolina... Thats hardcore.

We must play a little bit higher fps. Rifles can shoot up to 550-600fps, and aren't allowed for night games because at night there are generally closer engagements. We still allow 430fps full auto for night games, my M500 and the other M500 shoot similar fps... were just an exception because its not full auto.

Yeah I know, It was an odd idea but I needed something quieter for the night games we play since I cant use my rifle due closer engagements. The revolver shoots 470fps though with a 9" tightbore, pretty wicked. I'm not a fan of flashy weapons but I got it for a reasonable price and made it an SD with threading for a suppressor, does its job.

Here is my teams arsenal, mine is the Maruzen Type96 in the back with the burlap and the silver Tanaka M500SD Every gun is upgraded internally and most are externally. M14 EBR x2 M14's M4RIS w/ Gemtech BHD M4 w/ Aimpoint AK RIS Mossberg M500 MP5k Sig552 M4 w/Halo M4RIS M4SIR M15RIS MP5 MP5SD P90 SPR Mod1 APS2 SV Real steel M1100 G3 Offizer countersniper Type96 M249 M24 Type 96 APS2 SV Pistols P99 suppressed x2 P226 Mk23 M500SD x2 1911 x2 Inifity's M500

Here is an RPK I made for my friend, the wood is all real steel, along with the gas tube. 360fps 10.8v battery. All Systema internals. All Metal.