hitmanhigger

The battery wires are routed to the stock tube. So unless you can find a nihm battery that can fit inside the stock tube, your best bet is a 7.4V lipo.

So I couldn't wait and I dropped some money on a 416c this past weekend. Sadly, the bolt catch no long works after like 3 mags. The nozzle was also sticking a lot after the bolt catch stopped working and i'm wondering if it's dude to the corner of the bolt where the bolt catch locks onto being worn out is causing all these problems. For the couple mags that I put through it, it was pretty solid. The gun is at home in Hong Kong while i'm away at work during the week. So don't get to test it anymore until next weekend. A shame that Umarex and VFC use metal that is so bad that even G&P pot me

Thanks lonewolf!! It sounds promising, full mag dump with the zparts bolt would be greatly appreciated. I actually don't play with full auto when i'm running around with a GBBR, but it's nice to know that it will work. Thanks again!! oh btw... i see that you got one of the newer vfc bolts with that pin the bolt lock corner... how is that bolt holding up? Thanks.

I look forward to reading about your tests. I almost got myself a 416c the other day, they are basically out of stock in hk right now besides one or 2 stores. But i decided to wait to see what you came up with with your tests and also to see if the second batch of these guns that come to hk will have little improvements. Thanks for doing this!!

@Lonewolf I asked about the replacement BCG at WGC, they are out of stock of the original vfc ones right now, but they should get them back in stock sometime, don't know when though. The other one is the steel BCG like everyone is talking about now, and that is going for like 1K HKD around that.

@Lonewolf I haven't been able to find a number for VFC either, and they are also a Taiwanese company. What I do know is that apparently there is a Steel bolt with the HK marking for 416 guns that should be out very soon at www.wgcshop.com . You can probably email them about it, I know they posted it on their FB page, but ppl have been commenting on it with Chinese and I'm not very good with reading it. haha.

Thanks for the test and the update Lonewolf! Much appreciated.

hahaha... I wish I lived in the states and had access to all the real steel stuff. But your right... Ho Jiang Ah here in HK for all the airsoft stuff. haha.

Thanks Lonewolf.... at 40+ mags without jamming is already pretty good. I can't even come close to that with my WA system Gbbr's. I've like kinda given up on them. Your review has given me hope on the 416c... I'll keep an eye out on what ppl are doing to their guns here in HK and see what happens. Thanks for your review.

Quick questions... Have you tried emptying a whole mag in full auto? Have you had many jams when you shoot the gun? I was looking into getting a 416c and was actually at the stores in Hong Kong to buy one. But like you mentioned, lots of ppl have had problems with VFC gbbrs and my friends talked me out of it, and I went for a GHK AKS-74U which I have fallen in love with. But I'm still very interested in this 416c. I have loads of ppl here in HK telling me to stay away from VFC guns or they need modding before they will run smoothly.

Wow... the gun looks good. I was interested in one of these or the longer 16 inch version. Looking forward to your performance review. Another question, can you only get these from WGC shop in HK right now?

Anyone know if there is a enhance recoil spring that will fit this gun. I can only find a 160% enhanced recoil spring for a Marui P226. Was wondering if that marui recoil springs will fit into this gun. Any help would be nice, thanks.

Just Picked up my King Arms M7A1 Dark Earth Edition today... love it so far.

The only problem I had putting it together was the front hand guard. It's a little bit too long and too tall so you have to cut down a bit of the material... it's not hard with some modeling pliers. And also had to shave down a little bit of metal on the metal piece that holds the hand guard in place for the set screws to go back in.

My SR-16... I've had it like that for probably 3-4 years now.. I'm thinking if I should turn it back to stock and get a crane stock. But then I'm also thinking about getting a new G&P M4 Oh... sorry for the bad Pic.. it's from a couple years back. I haven't been home in a year now, so I haven't even played with them for that long. the gun beside it is a Sun Project M40 XB.

My TM AK... it's been like that for awhile... haven't been home from Uni for a year now. After some cosmetic mods I did