Jump to content

swannie_2006

Regular Poster
  • Content Count

    552
  • Joined

  • Last visited

Everything posted by swannie_2006

  1. swannie_2006

    G&P GBB M4A1 family

    You won't lose accuracy. There is just much of a difference in the barrel length. If it was between 300mm or 500 mm then sure you'll have noticable grouping differences. What it makes all the diffrence in the GBBR world is the fps. Longer the barrel higher the fps you get.
  2. swannie_2006

    G&P GBB M4A1 family

    1J ? Holy ######... That is worse than here. In this case I suggest you go for the shorter barrel (210mm) . It will still be way over your limit. Mine is shooting 400 fps on green gas when the NPAS is turned off Shoots 280 on duster gas. But it does not like the duster because the RA-Tech BGC is steel not alu.
  3. swannie_2006

    G&P GBB M4A1 family

    Yepp. That would be your best bet. RA-Tech sells a hop-up+prec barrel combo at a -sort of - reasonable price. Go for the longer barrel if you don't have such low fps limits in your country as in the UK..
  4. swannie_2006

    G&P GBB M4A1 family

    yeah. You might want to have a precision barrel and either change the hop-up or mod the G&P one because it sucks.
  5. swannie_2006

    G&P GBB M4A1 family

    I'd say anything that does not need its own delta ring would be just fine. It was said previously that all standard front ends (king arms, etc) would fit just fine. recently bought a King Arms CASV-M front end. Still waiting for it to arrive but according to WGC guys it should be good. So I assume all others should be fine too. Except for the JP Rifles front ends. They don't .
  6. swannie_2006

    G&P GBB M4A1 family

    Right, Then let me re-phrase the question: what FPS does it produce with that RA-Tech prec. barrel on HFC and red/green/propane (whatever you call it) ?
  7. swannie_2006

    G&P GBB M4A1 family

    New question popped into mind: Did anyone fit a tight bore barrel into a WOC ? Say the 6.03 from RA-Tech. How much does it increase the FPS ?
  8. swannie_2006

    G&P GBB M4A1 family

    Hey RManiac, Oh yeah, I still need this info., Thanks for the extra tip on the recoil spring.
  9. swannie_2006

    G&P GBB M4A1 family

    Anyone tried the 5KU mags yet in a G&P WOC ? On other forums they say it is already Top gas ready so no need to fiddle with the o-rings. My only concern is : does it have a bolt catch function ? If so, I might jump to it and give it a go
  10. swannie_2006

    G&P GBB M4A1 family

    Hello all, Since this topic seem to be the most active on Arnies regarding G&P GBBRs I'like to pop the question here. I recently bought my G&P WOC (me is very happy, though I need to learn a lot about their proper maintenance and how to fix the initial issues (double feed, BBs rolling out of the barrel, etc). I am planning to upgrade my WOC with an RA-Tech NPAS. Should I buy the complete bolt or would just the aluminum nozzle be enough to make my gun a bit more reliable and to have the NPAS? Also, is there any advantage to the RA-Tech bolt carrier ? I am very happy with the ROF and recoil of my WOC as it is now I don't want to have less recoil. And as far as I know the RA-Tech bolt carriers are some light-weight ones to increase ROF, decrease recoil. Would the nozzle set itself be compatible with the "original" G&P one? Thanks
  11. swannie_2006

    pictures

    er...
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.