mightyjebus

74M was a soviet program to Modernise the rifle and was carried forward under the Russian Federation when the cold war ended. AK-12 and 15 finished troop trials at the end of 2017 and officially adopted as the new infantry rifle for the Russian Federation however it has only been seen in limited numbers, possibly down to financial reasons. Qatar armed forces have purchased 800 AK-12's for their army and these have been delivered and seen at a parade recently in Qatar. I haven't seen any info on the AK-12 appearing in Syria yet as most of the RUS SF seem to be running the AK-74M

Don't know how long I've been coming here. It's long enough that I bought Arnies TM G3 SG1 (still got it in the pile). Looking at the skirmish field the levels of people haven't really changed much but social media is different for the newer generation of softers. Imgur/Reddit/Facebook have diluted the sources of information and probably explain why not so many people come to the forums. Photobucket being a *rickroll* and charging people to host photos hasn't helped. Airsoft forums UK seems to get a decent amount of new posts and reminds me of the early days with lots of new player q

The blonde furniture gives it a Hungarian look and my 2 cents would be to replace the pistol grip with the Ares slim motor and grip to finish it off.

3D printed rail

I would like to but in Cuba right now.. I might stick them on shapeways so people can order them direct

yeah I can get a 7.4v 1300mah in there without problem.

Tokyo MArui NGRS L119A2 with 3D printed stock pad to hold 7.4v 1300Mah LIPO

Tokyo Marui HK 416 Delta Custom in Dark Earth with 3D printed stock pad to hold a 7.4v 1300maH LIPO

I've had this TM with Guarder aluminium frame and slide for ages and have been meaning to polish it up at some point. That some point was today. I was going to do the lower frame as well but I quite like the 2 tone look.

Finished work on the Lower Hand Guard. I've made a few different versions of the lower with various RIS options. Only 1 small RIS on the left for example. Next project is a M4 Stock Tube adapter for the AK.

http://www.asiaairsoft.com/index_eproduct_view.php?products_id=10231

They seem to be good. I've just ordered another 2 as I really like the size of them and fitting is a breeze.

Gas or Electric? Electric. It's the new ARES slim high torque AK V3 gearbox motor. The grip is the same size as a RS pistol grip.

thxs. I'll probably make a lower as well with rails on the side and bottom

So i really wanted to change the plastic wood-like furniture on my TM NGRS AK47 but it turns out that TM have made the handguards 3mm longer than the real thing so after a bit of thinking I tried something new for me. I bought some wood effect sticky backed vinyl and using a heat gun added it to the plastic furniture. I didn't turn out too bad and the vinyl comes in different wood types if anyone is interesting in trying it. I didn't add the vinyl to the pistol grip as that would have been too difficult. So I'm happy with it but I have an idle 3D printer and thought to myself "

really good review. thanks.

3 or 6 shot and I just double checked (anything to fire this thing again)

and with a bit of filing you can fit the GE grip to the TM breacher

Golden Eagle M870 Sebru 5 shells worth of BB's with each charge. Gas is held in the pistol grip and cooldown is minimal due to the heat of your hand on the grip. Grip will fit other GE M870's but not the TM models. I haven't had a chance to see what stops it fitting but I'll investigate.

all taken with a samsung S8+

Tokyo Marui NGRS Type 3 AK47

Yeah they are solid pistols that are TM/Aftermarket compatible.

Wingman try here: https://www.octagonairsoft.com/gbb-1

decided to paint the GE M870 so that most of the parts matched. I used Halfords FDE then a coat of clear matt varnish (Halfords) to seal the finish. I've got a new top rail coming in the post so the current G&P one on there will be replaced.

messing around with the Golden Eagle M870. Parts, M870 Tan, G&P Long tan top rail, Golden Eagle gas stock tube, PTS grip, magazine extender and ACM tan stock. Probably going to swap the G&P for a more compatible one and add a lightweight buttstock to the gas tube.