Jump to content

klh31

Members
  • Content Count

    59
  • Joined

  • Last visited

  • Days Won

    16

Everything posted by klh31

  1. Well, after some difficulties (slide difficult to go back to its original position) and some harsh solutions applied (mainly oil and strong manipulation), everyting went back to order and it is still working fine. Therefore nothing special to report on the Bell.
  2. klh31

    Bullpups

    Addition to my collection: a russian VSSK (Co2);
  3. The G17 Bell version: The G34 WE version: The G17 SA version: The G18C TM version:
  4. klh31

    Bullpups

    The latest addition: SRS
  5. With pleasure: It is a modified LR300 stock.
  6. My collection: Sten AGM P08 Luger WE Sterling (a bit after WW2 but tested in 44-45) PPSH Snow Wolf P38 WE Mosin Nagant M44 based on Red Fire version Webley Wingun Tokarev SRC Browning 1935 WE 1911A1 Tercel Lee Enfield based on M40 Snow Wolf
  7. My collection: Mini Tavor based on Umarex / VZ58 Ares / Mini Uzi KWC / MP7 TM / Kriss Vector KWA / VZ61 TM
  8. My collection: Webley Wingun / 357 Magnum Tanaka S&W 38 Tanaka
  9. My collection: M16 SPR build from various parts available M16 G&P XM177 ViperTech M4 Israeli version ViperTech M4 PTW M4 DBoys HK416 TM Massada A&K
  10. My collection: Mosberg M500 ? Long Entry Shotgun G&P Spas12 TM M870 APS XM26 PPS
  11. My collection: 1911A1 Tercel / 1911 TM / MEU Socom Gear MEU Socom Gear Infinity Capsicum TM / Infinity WA / Baby Highcapa WE
  12. My collection: It includes one or two cousins, sorry for this.
  13. klh31

    Other pistols

    My collection: Stechkin Gletcher / Grach Gletcher Glock C18 TM / Makarov Gletcher Makarov KSC / Tokarev SRC Desert Eagle TM / Browning WE UPS ? / P226 TM P38 WE / P08 WE
  14. My little collection: Samurai Edge TM / M93R KSC / M9 WE M9 Sword Cutlass WE / M190 HFC / M9 Socom Gear M84FS Cheetah WE / Bulldog WE / Storm HK
  15. Decent after a paint job, but I had to reinforce everything inside by some aluminium rails and putty. But, to be fair, I would not jump on it as it is a cheap plastic (even cheaper than the S&T Tavor...) I lost the single/auto capability as the original plastic gearbox was replaced as well as the electric switch that was replaced by an electronic push style contactor. It shoots only auto but I will try to find a solution with a mofset.
  16. Here is my small collection: TM with Zeke kit: ICS Galil: Same as above, but with a more tacticool look: Mini Uzi KWC with metal kit: Micro Tavor X95 Umarex with p90 metal gearbox : Tavor S&T: M4 ViperTech with Israeli look:
  17. klh31

    Bullpups

    @CapnNukem: Well a lot of work before the first firing tests: The nozzle of the P90 gearbox had to be inverted from the original upper position to a down position (see pic below) , then the tappet plate has been modified accordingly (reduction of high). Then the new metal gearbox had to be locked into its place with long screws (replacing the screw used to close the gearbox) and position had to be adjusted with a number of bolts (the aim was to place the gearbox right in the middle of the available space, exactly in the axis of the hop-up system), the buttplate had to be opened in order to a
  18. klh31

    Bullpups

    And the latest newcomer: a Micro Tavor. A custom made from an all internal plastic gearbox, replaced by a P90 metal gearbox and a 6.01 internal barrel. and the making of:
  19. A Saiga 12 custom based on a Cyma:
  20. Webley MK VI from wingun: Wonderfull replica with very nice finish. One of the rare CO2 that could be used in game (power around 320 Fps for mine). A hop-up and a AEG barrel could even be fitted inside to increase the performances.
  21. Not sure the plastic to be strong enough to support a moving stock. The rear of the gearbox is very close to the stock and there are really no place to create a metal support here. The replacement of the internals (gearbox V3, hopup and barrel) was very easy. Original: After mods and paint work:
  22. @ Blobface: Yes you've got it. It was a Blackviper in clear plastic. The only advantage was the price. All internal have been changed by standard material (I mean metal, reliable and strong enough to support our hobby): Gearbox, hop-up bloc, hop-up, precision barrell, replacement of plastic parts by metal such as sights (F&R), installation of a red-dot and grenade launcher to add some weight and a paint work (inside and outside). Now this replica is working fine, the only outstanding issue is the weight feeling in your hands, still on the light side. I will surely not treat this
  23. Unusual AK-12 finished this week-end: and 1 9A-91 even if not directly related to the AK family:
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.