millest

shriven - which version of the mich is that? cheers

badly browned, thanks for the pics saved me spending money whilst in doubt, youve now shown me how awesome CB interceptors are with ACU, looks like ill be getting one for both my acuucp and my marpat. cheers bud looks good. is there any chance of a quick kit list cheers millest

i really like that, shame they dont have it in OD, mind you its also a shame that i dont understand the website as i was quite taken by this one as well: http://www.idefixteko.se/open_produkter/pr...8&aktbild=1 but something says to me that would be quite noisy where as the other one looks softer. any chance on letting me know if they have the od one and the sizes etc i just really cant under stand the site cheers millest

on its way bud

true their also much more costly, hence running thermolds with main aeg and then when im sniping taking a couple or three pmags, would definately recommend the pmag though if your not bothered about costs cheers

a few older ones of me at Ravens nest, my local site, in my Propper ACUs with an ACM OD ciras and my A&K M249 - i apologise for the campness in them, and they are my older rig so bare with me, hope to get some of my newer ones up once i get some taken: reading an apology from the mrs after her ringing me got me shot in the danglies at close range: trying to be serious: pimping wit my saw!: yes i did manage to look that camp cheers millest

they look cool and at 450rds a piece they do the job well. i do like the look but for the g36 hybrid dmr im planning i intend on using a couple of the p-mags from further up the page on my post as they just look that little techier! millest

as promised some more pics of my g36, i think any that use m4 magwells should be designated g36c4 im a geek i know. lol anyway with out further ado: on floor with thermold mag and c-mag next to it C-mag installed another C-mag picture a stand up shot the business end clearly showing the foam inside the silencer :D cheers millest

as promised some more pics of my g36, i think any that use m4 magwells should be designated g36c4 im a geek i know. lol anyway with out further ado: on floor with thermold mag and c-mag next to it C-mag installed another C-mag picture a stand up shot the business end cheers millest

as promised some more pics of my g36, i think any that use m4 magwells should be designated g36c4 im a geek i know. lol anyway with out further ado: on floor with thermold mag and c-mag next to it C-mag installed another C-mag picture a stand up shot the business end redscare - if your going for an m4 c-mag from dboys i can recomend them even though they are somewhat fragile but i cant say about the g36 one, though one would hope its of a similar quality. cheers millest

my g36 with pmag, m4 adaptor, acog red dot and zombie silencer. also showing my themold mags and TM tracer unit internals are stock apart from a system piston and piston head, considering the short barrel its spot on for range, though acuracy does suffer. time to order myself a twisted TM barrel to see if that helps with the acuracy cheers millest

cheers, its looks good with the thermolds in too, ill try to get one up of it later. the pmags are nice to use and the clear window in the side really adds to the effect. redscare - i own the m4 one from dboys for my g36 (go figure, lol) and its good, that good in fact i plan on using it on my g36 dmr when i finish it! cheers millest

my g36 with pmag, m4 adaptor, acog red dot and zombie silencer. also showing my themold mags and TM tracer unit internals are stock apart from a system piston and piston head, considering the short barrel its spot on for range, though acuracy does suffer. time to order myself a twisted TM barrel to see if that helps with the acuracy My M249 with added Samurai Elcan, its pretty much stock other then a CA hop unit that i dont thing is much better then the standard A&K one and a guarder advanced hop rubber i know i need to paint the front end but other then that i thi

My M249 with added Samurai Elcan, its pretty much stock other then a CA hop unit that i dont thing is much better then the standard A&K one and a guarder advanced hop rubber i know i need to paint the front end but other then that i think she works well, though have considered adding a mk1/2 barrel and a longer inner barrel but not sure if its worth it as shes a lovely gun to start with. also my TM tracer unti does fit when i remove the lower knob on the front which is nice and looks sweet on night games cheers millest

my g36 with pmag, m4 adaptor, acog red dot and zombie silencer. also showing my themold mags and TM tracer unit internals are stock apart from a system piston and piston head, considering the short barrel its spot on for range, though acuracy does suffer. time to order myself a twisted TM barrel to see if that helps with the acuracy cheers millest

i thought it was something different, looks cool though, now to see if i can find on that will work with both marpat and acu! lol i can dream cant i cheers guys

nice look guys. im loving these tad hoodies but not only can i seem to find them in shops anywhere but i really cant work out what colours they actually are, help! lol cheers millest

a few of me at Ravens nest, my local site in my Propper ACUs with an ACM OD ciras and my A&K M249 - i apologise for the campness in them: reading an apology from the mrs after her ringing me got me shot in the danglies at close range: trying to be serious: pimping wit my saw!: cheers millest

a few of me in my OD ACM ciras - i apologise for the campness in them: reading an apology from the mrs after her ringing me got me shot in the danglies at close range: trying to be serious: pimping wit my saw!: cheers millest

a few pics i dug up from a few months ago over at ravens nest: me managing to make myself as visable as possible: what can only be described as a "shack attack" - shack doing his zebade impressions in the apc: more to come from gunman when i get them millest

my two latest toys in their basic versions ill get some pics today of them with all their new toys cheers millest

my m249 in its basest format ill see about getting some pics later with my elcan on cheers millest

billytehbob - ill try to get you one when i get in from work as i want to get some pics of my g36c up. for now to keep the flow heres may g36c in its most base format cheers millest

does anyone have pics of any with grenade launchers, a ag36 is ok but i would really like to see one with the mosquito molds launcher on and what you think of them if possible cheers millest

interesting pic there, anyone know anything about the stock on that it looks very cool. still deciding whether to get the long 6 hole conversion kit (http://www.rsov.com/index.php?target=products&product_id=1575) for my jg g36 but cant decide, mainly cos ive no idea what role it would fit!!!