hugh_b
Forum guru-
Content Count
512 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by hugh_b
-
Hi guy's, i'm thinking of purchasing the we tech m4 cqb co2 ready version. I've tried to read through this thread but haven't got alot of time right now and 300 pages takes along time! I'm hopeing someone can help... -How are the latest c02 ready versions of this gbb? What should i be looking at upgrading or are they good out of the box apart from pprehaps an n-pas? Thanks Hugh
-
Tried one of these at a site today and ordered one from tactical quartermaster when i got home! From what I can see here i'm going to need: -N-pas -Stinger hop unit -Possibly a lighter bolt? Anything else you chaps would reccomend? Hugh
-
The G&P Lewis Machine & Tool Co. Monolithic Rail Platform CQB Carbine
hugh_b replied to hwagan's topic in Rifles (AEG)
Mine all sorted now...Moe stock, grip, asap plate, pts m version p-mags, madbull h nub. I fitted a guarder sp90 spring but this dropped the fps down to 290, so i trimmed 2 coils from the standard spring which has dropped it to 350. Also had to solder on new motor connectors as the magul motor plate wouldn't sit over the end of the motor properly with the screw in style connectors. -
The G&P Lewis Machine & Tool Co. Monolithic Rail Platform CQB Carbine
hugh_b replied to hwagan's topic in Rifles (AEG)
Received mine today...it's the nicest aeg i have had by far, shoots amazingly although it chronoed just a touch hot...400fps!! So i'll be ordering an sp90 spring and running a 7.4v li-po. Hugh -
The G&P Lewis Machine & Tool Co. Monolithic Rail Platform CQB Carbine
hugh_b replied to hwagan's topic in Rifles (AEG)
Well, have been sitting here ummmming and arrrring over what to do.....I took the plunge and ordered one! It will have to wait until the end of the month/some more of my stuff sells to purchase a moe stock, some ladder rail covers and mbus but hopefully it will be lovely to use anyway! WHat li-po's are you guy's running? 7.4v stock tube? -
The G&P Lewis Machine & Tool Co. Monolithic Rail Platform CQB Carbine
hugh_b replied to hwagan's topic in Rifles (AEG)
Sounds pretty good! Would have to part with my new l85 to fund one though -
The G&P Lewis Machine & Tool Co. Monolithic Rail Platform CQB Carbine
hugh_b replied to hwagan's topic in Rifles (AEG)
Just looked at this thread having not read it for a while and saw uscmCorps lmt.... I think i may have to purchase one! Has anyone actually measured the range of one of these? Most aeg's i've had have reached out to 150-180ft max, how would this compare? I'd be wanting to use it for both woodland and urban you see! Hugh -
My new ares l85a2 with acm 4x acog and ares 20mm rail adaptor. I thought the new ares came with the parts shown in the split diagram on their website but mine came with a pretty poor cylinder kit but fire support really helped me out and sent me the upgraded parts such as stainless cylinder head and air nozzle etc. I re-shimmed it, fitted a fireworks airsoft mosfet and madbull hop rubber. The standard motor doesn't give me a very good rate of fire (only 18rps with an 11.1v!!). Ordered a g&p m120 high speed to go in it so should be able to run it on a nice big 7.4v li-po but get a decent
-
The G&P Lewis Machine & Tool Co. Monolithic Rail Platform CQB Carbine
hugh_b replied to hwagan's topic in Rifles (AEG)
Fantastic review! This was on my shopping list until i spent a ridiculous amount on building an l119a1 (mainly from g&p bits). Something i've noticed, this batch now has a brass cylinder again, my m4 from LWA came with a black coated cylinder and i think the sentry's did as well. Probably something that doesn't make much difference but odd that they have changed again! What is the rate of fire like using the li-po? Thanks Hugh -
Seems very nicely made buddy! Very bright, more of a concentrated beam as opposed to a flood, but that suits me fine! Lights up rooms easily. A fair bit brigther than a standard real one. It even has surefire trades! Only £26 delivered from rsov too!
-
started out as a g&p m4a1 a few months back. Now has: MOE stock, grip, handguard and ASAP sling plate. Dragon red eotech xps, element surefire m600 replica flashlight. Prometheus tightbore and hop rubber with scs nub. Latest g&p internals running off a 7.4v li-po.
-
With regards to the afg, i've seen it fitted to a RS moe hand guard so assuming it will fit the pts handguard. Does it need a rail the full length of the handguard? I have a 115mm, same spec as magpul pts rails to go on the under side but the afg is longer, will it matter if it mounts to a shorter rail? Hugh
-
Condor Soft Shell Jacket
hugh_b replied to sierra hotel's topic in Clothing and Load-Bearing Equipment
Just wondering what the sizing is like on these guy's? I'm 6ft, slim/medium build. Normally have medium size t-shirts/jackets etc? Would they medium be ok or do these come up small? -
The battery i reccomended fits in a crane stock. If you want a battery to fit in a stock tube you need look at smaller stick type batteries. Component shop do one in both 7.4v and 11.1v in 1200mah 20c capacity. These will alow you to run a standard stock. Hugh
-
R5t2, that is perfect.....couldn't be any nicer! Did it all go together smoothly or was modding required? Hugh
-
Depends what size you want. I have used a hot power 15c 3000mah 7.4v lipo in a crane stock. E-hobby do them, they fit in pretty much every crane stock i think. Hugh
-
Thought this was the best place to ask...Can i use a rear mbus with a standard m4 front triangle sight or will the mbus be too low/high? Hugh
-
Madbull Ultimate Hopup Assembly
hugh_b replied to aznriptide859's topic in Tactical Equipment and Accessories
Anyone else tried this yet or does anyone have some accuracy/set up reviews? Looking to fit it into a g&p m4a1 which i'm told it will? Hugh -
Sorry for the poor quality pic...lighting was bad! My warrior ricas compact. I'm currently running 6 g&p mid-caps and one in the gun. I may purchase another 2 and add one more of my mag pouches but not sure yet. Fitted to the rear i have a warrior hydration pouch and adjustable radio pouch. Out of interest what do you guy's actually put in your utility pouches? The only things i'll need even for large weekenders are food, ammo, speed loader etc.
-
the tracking number for my ricas compact says out for delivery today but doesn't look like it's coming now Not uk tacs fault, i think the courier just hasn't bothered!
-
thanks for that, hopefully i'll be getting a text tomorrow then!