tinydata

An enhanced hop-up design lol The WE SCAR seems pretty good. Price wise, its pure gold. My friend got one and I like it (despite being a firm believer in the WA system). It kicks hard, shoots reliably (for now) and has a pretty good FPS output. Not sure how much range it gets but we'll figure it out. If WE made a steel trigger group they'd have some really, really good guns. When was the last time you heard of an Inokatsu breaking something serious?

Don't want to steal your show oggy, but I figure this is the best place to post info first I got my Ino 2009 Super Version today. First things to note right away that differ from a WOC: -the gun is much, much heavier -finish is darker, more realistic to real AR-15s I've shot -delta ring spring is much stiffer -recoil spring is much stiffer, action doesn't seem as smooth So I fired it a few times. The stock trigger spring is complete trash. Its too weak to fire a pro-win mag, hence the upgrade kit. I do not have it and simply took my AGM trigger spring (ridiculously stiff)

Just wanted to do a little reporting on the Pro-win mags. They work fine with duster and a squirt of greengas. (very cost effective and still provides a decent cyclical rate while preserving your internals) I tested a mag on full auto today with snow on the ground and it wasnt too bad.

I own two GHKs (both broke...and have been repaired since) and three pro-wins. I would take the Pro-win any day over a GHK Here's why: Feed lips: GHK is plastic- BAD The pro-win is metal and exceedingly sturdy Fitting: GHK requires a bit of sanding to fit. Pro-win does not Performance: GHK is alright, with solid blowback. Pro-win, however, blows it away in this category. Excellent mag-nozzle seal. As for cool down, I stepped outside (35-ish degrees F) and let loose with dry fire. It must have cycled 60-70 times without much slowing down. Remember, this is in the cold.

My G&P loading nozzle promptly wore out on green. One of my G&P bolt carriers cracked with an aluminum nozzle after quite a few mags. So overall, they're good but not the best. As for pro-win mags, the three I ordered all work amazingly well in my WOC

For people looking for mags, the Pro-win is epic win!

Did you get around to stripping the loading nozzle?

Andrew March, first off, stop taking dumps on someone who was nice enough to take his time to share details about his gun. Go take a **** in your own thread. Second off, you go get a life, seeing as you PMSed about Ehobbyasia screwing you out of $10. I still love them. Finally, Oggy, have you fired it at all yet? I can't wait to see this.

I personally hate GHK mags now. The feeds lips are plastic and will break and wear down- causing misfeeds, jams, and failures. My AGM mag worked amazing with G&P o-rings till I cannibalized it to fix a bomber magazine Don't know why people hate them so much...

Luis21, I'm using the new Gen 2 black anodized NPAS nozzle. I just got it today but I will say it cycles more smoothly with GHK mags than the 2Roy one does. However, I'm using it in my G&P so don't quote me on that. Also...got a bomber mag...seems to be nice. Not leaking on green yet either.

That's what I'm assuming...

What magazines are you guys using? My SECOND GHK mag just failed on me...feed lips aren't holding BBs in...so I get a chamber full of 6mm plastic every time I fire... And where can you get magazines other than the WA and GHK? Can't seem to find any... If anyone has AGM/5KU/KUI mags for sale...I want em

Swerve, the damn gun WORKS, ok? Get your act together and go look online for videos... Redwolf did a nice review of a stock Inokatsu M4 and it fires very, very well. I also handled one in Taiwan...it fires, ok? Don't complain that he hasn't gotten a mag for the gun. If you can afford a $890 gun plus a $40 mag, all at once, then go buy the rifle and write your own review. Otherwise, stow it. Also...I looked back at a picture of the one I played with in Taiwan...doesn't seem to be that flash on the magwell. Strange...who knows what the reason is... Don't criticize the OP for tr

I'd love to know that too...can't seem to find any extra uppers. If I buy a G&P body kit, does someone want the lower and I'll take the upper? lol

Yeah...but you're sort of missing the point. The Inokatsu, while built to perform and dish out punishment, also has THE NICEST externals on a stock M4 to date. It is also supported by a LOAD of aftermarket support unlike the KJW. Now that my rant is done I'M SO JEALOUS

My vote goes with the 2Roy POM nozzle. Its $30 and pretty reliable. It survived a couple hundred in my AGM and has survived way more in my G&P. All on green gas with a NPAS set to 330 fps. It wore a little bit the first 100 rounds but hasn't worn down ANY more.

Can't answer the first part, but the recoil is pretty nice. Heavier than a G&P, but still less than an AR-15. (real guns generate FAR more energy than the Inokatsu)

I have a G&P M4 and the RIS isnt that hard to pull off the bottom. (KAC style)

Luis, can you point me in the direction of a clockwise extension? I can only find negative ones. Swannie, PM inbound! Also, are the G&P barrel nuts loctited? I can't get mine off with pliers

What would you guys recommend for an aftermarket outer barrel? I currently have a 10.5 inch stock G&P barrel, but I want a 14.5 inch setup. (G&P delta ring, G&G KAC RIS) I do have a barrel extension but it is 14mm negative. I have seen the Pro-Arms 5 piece barrel and the Guarder barrel. Do they fit? Otherwise...if you have a spare G&P 14.5 inch barrel (steel or aluminum), I'm interested! Thanks.

magsz, lets see you make a better body Anyways, thanks for the review. I got to fire one in Taiwan and I must say it beats the ###### out of my G&P

That's great for you. You can be an @$$ all you want. Way to change your post too

It depends. I play both outdoors and indoors so being able to adjust FPS up and down is a must.

I love mine, they seem to be the most reliable M4s currently out. Just need to watch the charging handle and DEFINITELY get the RA-tech NPAS by the way guys, I got my 5ku charging handle today and it fits without mods!

Gamed with the G&P M4 again in CQB...holy ###### its so pointable. Anyways, I ordered the 5Ku charging handle from Ehobby so I'll let you guys know how it works