Cali

Sorry, I should have specified. Yes, that is using .2g bb's, and the PDW is stock. Hmm..seems too long. The space above the barrel is wider than below. There's two rods there (gas tubes?) They're easily removed, leaving a space between the 'gas block' I think it is, and a part that is a a little less than 1 1/2" from the magwell that supports the gas tubes, in front of the gearbox. Takes a few seconds to remove the tubes (the gas block will take longer, to get the battery in there). That space is about 3 5/8" long, smaller that 1 1/2" wide close to the barrel (and gets narrower ab

Just did a quick test. Ten shots with my 120rnd Magpul. All shots between 361 to 371 (I think 8 out of 10 from 363-368). About the same for one of the metal mags, although I did have one at 352.

OK, I didn't fill these mags fully, maybe 20-30 bb's per; my loader is apparently broken, so I had to use the old loading tube... Magpul PTS 120 RND - Fed flawlessly STAR Magpul 75 RND - Fed flawlessly CA high cap - Fed flawlessly misc. metal midcap - Fed Flawlessly Mag midcap - Fed flawlessly, but it would sometimes stick in the magwell and not seat and catch; I think it was because the plastic texture of the mag had more friction, so I'd have to push it in harder. VFC PDW 120RND mag - The gun chewed up the first bb...after clearing it, it fed flawlessly. I did a second test w

I wasn't sure it was going to look good either, but I like it. I can't fire the gun here at my apartment complex, but I'll try to shoot it into a box with newspaper or something later after work. Thanks. I do have the silencer it came with, but since UNCompany didn't give me the proper flashhider, I guess I'll have to hunt for one that works with it. I probably have one buried somewhere. Hah, so did my family, friends and teammates. Working 7 days a week on & off for a few months can do that. But at least all that OT helps me afford my toys.

Glad to be home on a day this came; been on the road for work most of the past six months. Would have driven me crazy if I was gone all week, knowing it had been delivered. KAC PDW in the config I'd LIKE to use Aimpoint Micro T-1 clone. TangoDown short grip on a QD mount Magpul PTS PMag (very slight wobble left to right, but definitely doesn't let it drop) MadBull DNTC Aggressive Compensator (from another gun; for some reason it only came with a plastic orange one, which I immediately removed, no Knights-style flashhider) KAC PDW in the config I'm likely to run it

I had one of the stocks on mine, but ended up removing it for the same battery issues you mention. No way I was going to battery bag one, either. I did try a battery sling, but had issues. I'm surprised the stock didn't fit...mine fit fine. Was yours a G&P or CA? Mine is G&P.

XxChRiSxX - Thank you, glad you like them. Interesting, I recently (about 2 weeks ago) contacted someone at Magpul who said they CURRENTLY have no plans to make an airsoft version of the mag. However, he did specify that it did not mean that they would never make one in the future. Hopefully they do make one. I'll still try to mod one or more when I get a little more time away from work. At a first glance, it actually looked rather easy for AEG's (with tools that I don't have, lol), a little more difficult to get right for PTW's. And it wouldn't surprise me if s

P-Mag is currently for the pic only, I haven't converted it for airsoft yet. Need to get a Miad and mod it for the PTW.

Wow, EBR's with Magpul CTR's...interesting. I think it would look good with a VLTOR E-Mod stock, or an UBR (whenever those come out)

Nice Tangodown Stubby, got a couple of them on the way myself.

Glad you like it. Yeah, I may change my mind and put the stock back on. I can put the battery bag on the left side of the stock, towards me, so that to others it's not as obvious, but I'm not sure. There's already a small channel cut out of the bottom of the base of the Magpul stock for the wires. Thanks yet again to my buddies Denis & Nick for various help working on it.

Like this? I had the stock on there before (still have it) but the problem is the battery. Didn't want to use a battery bag. A custom battery might fit into the handguard, but probably not. Plus the build of it would make it rather hard to access.

The green/gray of the 10th anniversary is pretty nice, I like it more than the ME Green. It's probably my imagination, but the main material seems a little different also, sligtly less rough. Buy it. You know you want to.

The rank should have been 'Private.'

I don't think I posted mine in this thread: G&P SR-25 JP Rifles V-Tac Handguard Harris Bipod Larue scope mount with a cheapy scope (needs to be upgraded) and a red-dot.