-=OGGY=-

Additional Pictures & Info: Inside the chamber: The numbered upper receiver: Thread adaptor for the barrel. This can be switched with the current one. I believe it is CCW thread: Just to let everyone know, I will be following up this review periodically. Firstly, I will let you know what stuff fits and what doesn't. I will update with pics of the Hop-Up unit and of the inside of the RAS once I get the proper tools. Eventually I will do a shooting test. If anyone has ANY questions or REQUESTS for pictures, just post in this thread. -OGGY

Internals Continued: The nozzle itself has a nice finish. The machining looks excellent. It appears to be anodized. The color is a bit light. Inokatsu was obviously going for a steel color for the nozzle but as I said, it came out a bit too light. Unfortunately, this is where I see a few problems. The gun must have been test fired at some point by either RedWolf or by Inokatsu themselves. I can tell because the nozzle is starting to wear. I think most of the wear is normal from use but near the top of the nozzle two sharp corners of the bolt carrier are digging into the nozzle. This shoul

Internals Continued: I like that on the selector, Inokatsu not only made the circular indents for the selector detent pin but also made a ‘track’ for the pin to travel in between positions. This keeps the selector in place while switching positing and while doing just about anything. The stock bolt stop assembly came with a spring positioned under the bolt stop rather than in the WA position. All the springs are nice and fit perfectly. (The opposite of what I found in my ’08 set; the springs looked stretched to the right size.) (Remember, the black firing block shown

Further Examination Continued: The pistol grip really isn't too special. Then again it really doesn't need to be, it looks nice. I was a bit surprised to find a hole drilled in the top of the pistol grip for the selector detent and spring. This is weird because on a WA system guns (including the INO) the selector detent and spring are located inside the body. I guess it just adds to the realism. Finally there is the front set. This is really one of the nicest parts of the gun. The barrel is absolutely stunning. The color is perfect is the machine marks are just lovely. The barrel mar

The pictures in this review are huge; it may take some time to load. 2009 Inokatsu M4 "Superversion" Background: Yes it's finally here! It was late July when I first heard of Inokatsu's second attempt at the GBB market and to be honest, I didn't think much of the announcement. By most standards, the original 2008 version was a failure; the negative reports far outnumbered the positive ones. Despite this, I decided to keep an eye on the 2009 Inokatsu. I soon found out that the 2009 M4 was entirely different from its earlier relative. With the promo pictures alone, Inokatsu had sh

EoTech on Mk12? Some lovely guns there.

I like it! (except for the neon of course, but that's not your fault.)

It looks like the real article, nice job!

*cough* the Inokatsu does! *cough*

Oh *fruitcage*, I wanted one!

Just buy a WE CQB-R barrel and put the extention from the WA barrel on it. Problem solved.

What SF you got on there? I think it's a clone... If so what do you think of it?

Personally I think the round/flat end looks 100% better. The sharp one makes everything look fuzzy IMO.

Please get a better pic of that mate; I can't tell if it's tan or canary yellow. The wear looks pretty good though.

I agree; I think a Vortex flash hider would suit that weapon well. Personally I would use a PRI sight but the Vltor one looks good.

Both 10.3 and 10.5in barrels are used (10.5 is more common in airsoft). The Mk12 gas block is used with the rail. (It's made by KAC). Link to replica: http://shop.ehobbyasia.com/gandp-ras-gas-b...free-float.html (Please note I don't think the real one is pinned) EDIT: The real thing: http://www.bravocompanyusa.com/Knights-KAC...gas%20block.htm

+1 Agreed, that rifle is insane. If you post up more pics could you also post pics of your M4?

Reaper whats with all the paint pen? I understand putting on the screws and stuff but why would it go on the fire control pins?

Awesome! Not awesome! BTW I'm just joking, we don't need to have this thread turn into another GBBr war.

Just out of pure curiocity, would anyone who has the Ares MARS want to sell it? There is a small chance I *might* want one for a project.

Looks good Pantopes. It's a shame those G&P receivers don't have more a a grey tone though.

A shortage? I cheap chinasoft store that just opened near me selling nothing but UTG and JLS has an Ares TAVOR!

I know I would be if I had some extra cash. I'm actually after one to put on an M4 for a USMC kit. Hopefully the TSI MARS will be nice (although it's unlikley after seeing the reveiw of their TAR ).

It sounds like all you need to finish the gun off is this guy right here: http://cgi.ebay.com/ITL-MARS-Laser-Aiming-...=item4a9c796f39

Hey does anyone here have the Ares XM110? I want to try to convice one of my friends to buy it. (we need a DM)