Jump to content

mrcheetos

Regular Poster
  • Content Count

    30
  • Joined

  • Last visited

Everything posted by mrcheetos

  1. I just need to find a combination of a mag and slide catch, safety and hammer that I like now. As my first "semi-custom" project, I've gained a lot of respect for you guys who build pistols from scratch. I also want to know what job you have, and if they're hiring. The base gun is a KJW KP-08.
  2. If you can, raise the frames per second on your camera and it should look smoother.
  3. So, from what I can gather, this thread is for any double stack/hi-capa based 1911 style gun? If I'm wrong, let me know, and I can move this to the 1911 thread. Started out as a KP08, but I decided I hated the squared slide and how hard it was to manipulate the snubby controls, so I canabilized my old KJW and transplanted the slide, catch and safety onto the grip. Can anyone recommend some good replacement sights? I've got my eye on a few, but I'd like to know if there are any underrated gems out there. I'm also looking to replace the mag release with a low profile one, all I can
  4. Not at all. You gotta go at it with a dremel, namely the catch and the ridge on the back.
  5. After about 3 months it still runs strong. Hasn't exploded yet. D-Boys Scar-H
  6. With these fancy new combat shirts and pants, people will finally realize just how awesome m81 is again. Great kits!
  7. I dremeled off half the rib on the back of the pmag. An example of this is shown a page earlier. The rib inside the magwell is still present.
  8. Not the best retailer. I've never had any trouble with the two times that I've ordered items from them, but other players locally have. It's a risk. If you can find the Madbull barrel at a store in your country, I would recommend going with that one. I've always loved Madbull products because of their high quality, and I don't doubt the threaded barrel is any less.
  9. http://www.evike.com/product_info.php?manufacturers_id=&products_id=35516 That's where I bought it. I'm not sure if you can find it anywhere else, my searches for one have only led me to the million dollar nineball barrel, and the madbull barrel with the extended innner. It's alright, the barrel isn't one piece, the actual threaded piece screws into the barrel. The finish of paint was terrible, too. I had to repaint mine. But hey, it's the cheapest solution for a threaded barrel on a 1911 right now. If you're going to get the barrel from Evike, get another product you need, they sh
  10. Yep. Flash hider from a Scar. The threaded barrel is made by WE.
  11. I guess I'll have to break out the power tools after all! I was hoping you found some unicorn site selling lowers cut for co2. Thanks, I've been looking all over for someone who has worked on replacing the body.
  12. Details on it? I have a KJW 1911, and I've been looking to replace the body..
  13. The mag catch + the ridge on the back of the mag (or the spine inside of the magwell, but I'd rather dremel a $26 magazine than a $100+ gun) Halestorm from airsoft canada did a great job with his.
  14. I looped para cord through the sling mounts and use my usual sling. I noticed a lot of people have been using beefy key rings to mount their slings as well.
  15. Nope, a little editing goes a long way. The uniformity of the color and finish of the entire gun are fairly close to the picture though. Thanks for the input. I'll have to tinker around with it once I start messing with the gearbox. For me, the orange plastic flash hider was a piece of cake to remove once you loosen the set screw and use a little elbow grease to wrench it off. The barrel extension behind it though, I had a hell of a time removing it. It's secured with thread locker, and I'm sure if you use a heat gun, it will be a thousand times easier to remove it. The metal
  16. D-Boys Scar-H Picked this up as an early christmas present before it went out of stock on ASGI. (Got the base aeg for $130!) Anyone have experience with the Magpul aftermarket selector switch? I'm really disliking the one on this, I feel like I'm going to break it off every time I disengage the safety.
  17. Awesome SCARS everyone. This thread inspired me to get one! Also, if you reside in the US, Airsoft GI restocked the SSR.
  18. KJW MEU Original Size so you can see how fake the bezel on the light is lol Real beat up, but real reliable.
  19. Well, if it isn't falling apart under heavy use and you got it for a fraction of the price, I'd say it's money well spent.
  20. Sidearmor holsters look great, I'll consider buying one. Thanks!
  21. Interesting 226 Clockwork. Did you do the engraving your self?
  22. Very cool 1911's everyone. The hybrid slides look pretty BA. I own a KWA 1911 Mk3. It's a decent gun, but not amazing.. It's cool that KWA made their own style of airsoft 1911s, the disassembly of it all feels a lot simpler than a TM style. I'm getting a KJW 1911 for the Co2, as the cold Washington State weather isn't very propane friendly. Since I'm getting that, I have a question for those of you running lights on your pistols: What kind of holster do you recommend? I'm very used to using Blackhawk! Serpas, and I want a similar style, but I don't know where to start. I'
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.