ninja828
-
Content Count
50 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by ninja828
-
-
Thats odd. The Pro Wins work OK in some WOCs and not in others it seems?
The four that my friends and I purchased don't...in three different WOCs too. They'll either first fire in semi properly, then a burst then vent or vent the entire reservoir on full auto and that's only if they fire. With the mags inserted in my WOC (stock BC and nozzle), tried it w/ the stock and a stronger hammer spring, did the fix prowin suggested and it looks like the hammer isn't even depressing the valve anymore. I double checked this w/ the upper receiver off and instead of it venting all the gas on semi as w/ my other working mags, I just get a slight puff noise, no significant gas expulsion...any ideas?
-
check dentrinityshop.com or www.wgcshop.com, both should have metal slides.
Anyone know if those slides work for the System 7 SP2022?
-
I picked up the 2022 when it first came out and it fires great but I've run into a problem where the slide does not lock back anymore because the notch on the slide where the slide lock catches, it has sheared off that part of the slide due to the powerful recoil this beast is putting out...anyone know of a place that sells replacement slides? or maybe even a metal slide?
-
Hello all,
Hope someone could help me...I'm trying to take out gearbox from the lower receiver. I try and managed to opened till this step :
http://s224.photobucket.com/albums/dd100/G...DAxMjIuanBn.jpg
Then I stucked.
Need guidance....
Tx all
You see that triangular metal plate right above the trigger in that pic? You bend the center piece away from the body slighty then slide the metal plate towards the rear of the body. There's another pin that you will see that holds the gb in place (it's the pin at left-most part of the triangular metal plate in the pic above the trigger) just pop that out then you're done! Took me a while of fidgeting to completely disassemble too
-
You guys seem to be forgetting that this gun is running a 7.4 volt battery (at least i think it is).
7.4 volt lipo's are basically equivalent to a decent quality 9.6. Trigger arcing isnt really a major issue with those voltages.
Ukau is using a 11.1v 900mah lipo to whom the question was initially intended for, guess I should've specified
uscmCorps: Your PDW looks so clean w/o a PEQ box! Lucky!
-
+ 100000000000000000
Thats why I ran mine in the PEQ15 box, so I could use a mosfet. The trigger switch is gonna be FUBAR within a couple outings. My buddy ran one of his aegs with a lipo but no mosfet. You could here the arching of the switch at the end of a long weekend of playing.
Have you switched out that aluminum piston head yet? Especially since you're running a li-po?
-
How's the mosfet situation look? I couldn't imagine running a li-po on any aeg, even the PDW, w/o a moseft unless I wanted crispy contacts after a day of use...
-
Awesome, usmc. Way better than that railed atrocity pictured earlier, with the knife and all that.
Hey, to each their own pal. It's nice to see a unique weapon on the field every now and then.
umsc: nice job w/ shottie, sweet and simple!
-
hows the durability of the lens on the ACM eotech? Once in a while when I'm getting shot at, someone will nail my red dot right in the lens. Luckily my G&G aimpoint replica hasn't shattered yet but I've seen some of my friends' reflex sight lenses get cracked by incomming fire
-
That's the first shotgun i've seen with a sight that didn't look silly,i'm impressed.
My thoughts exactly when I first saw it....now I want to recreate it...on a relatively decent shotgun platform that would compliment it's look, but if we start seeing a rising lemon rate of these ACM M500s then I may just have to scrap it...
-
just out of curiosity what were you planning to do with this gun?
I know it's an 870 but there's a stock adapter for mossberg 500s w/ an upper rail adapter that would go on there for the full length upper rail
-
and here I was all excited and planning my next shotgun project doing a full cost analysis for all the parts I was planning on getting for it....man that was a real downer post (no offense chas). Anyone else who has this shottie run into a similar problem?
WA M4 GBBR Magazine Test
in Rifles (Gas)
Posted
Think you'd be able to post some results from GHK mags maybe? I'd love to see the comparison of what you've done including GHK's mags