1st Commando

Yes I have and to be honest the G36 is much more consistant in the cold .

I noticed while testing my M16 that the hop was great for a few rounds and then would drop on both auto and semi. I have now removed both o rings and the barrel is more stable and hopefully my hop will be better as you guys have found. I'll test it later in the week when I have some decent range to shoot over

Has anyone found a reliable way of reducing fps at the valve without using npas ? I'm not a big fan of npas and used reduced valves on my closed bolt WE rifles . Is it a case of adding shim to the rocket valve or is npas still our best bet ? Many Thanks

they are out but no idea of where you might find them in stock

grips for WA can be made to fit but you will need to drill that small hole for the detent spring (i've done it on several . Real pistol grips should have the hole pre-drilled (I know all of mine did)

My RF nozzle arrived, fitted, secured the springs an dhad to file the top rib a little as it was catching on the securing block. I now have a working MP7

Yes mate, they have been around for quite some time

they dont wobble around but are made realistic to the M16 and are therefore cheap plastic . I'd go as far as to say they are real handguards to be honest

Update on my replacement nozzle. It was indeed a KSc as it blew itself apart after 20 rounds. Does anybody know anywhere in the Uk for either Rf nozzle or KWA nozzle ?

Just a note on the foregrips of the M16-A1 ,theyare identical to the real ones we compared them to. same plastic and same seam lines . I would go as far as to say they didn't make any of their own and instead decided to buy a load of real foregrips . Even the heat sheild is identical .

Don't panic, they are apparently moving premises closer to town. In fact a 5 minute walk from where I live I would never mail order from them but they are not a bad shop to drop into so i'm safe

I just recieved my new nozzle from a retailer and fitted it fine etc. My worry is that is looks the same as my existing one(KSC JAP) as it still has "MP7" legend on the nozzle. Do the KWA black nozzles also have this legend stamped into them as well ?

Bah , i feared as much . Cheers for your reply. I guess I had better try and track down a KWA piston cup

74 pages read over the last 2 days and I still need some answers I have bought a KSC Japan version MP7 and predictably the stock cylinder gave out after a few shots. The retailer is kindly sending me a replacement KWA cylinder which should arrive today or tomorrow. Has anyone here ran a Jap version KSC with KWA nozzle with the original piston cup and valves on green/propane ? If so have have there been any problems in the long or short term or will I need to replace the piston cup with the KWA version ? Many Thanks Gaz

He does acually mention stanags at 4.20mins

I'll have a go in a bit but it is the same as aegs in as far as aeg top rails fit

I have the army code and the WE body sat here and the finish is near identical and definitely both polymer

oh dear i had no such tool

I'm getting frustrated with this barrel assembly . How exactly do we remove the inner barrel from the outer ?

He has them in stock Rabbit

Ahh cool , it's good to put names to faces

I knew someone on here would have been on site . ARe you one of the newer lads from Bromsgrove ?

Very sure , I'm sure some of the players that were there yesterday will be along shortly . I was shocked as we had taken aegs up for the outdoor bit in the morning as we thought the G36s would stand no chance but as my aeg died straight away I had no choice . That said I did lie my gun on the floor for a while while helping players down a slope and it was sluggishish on the first shot after being lay down on the icy carpark for 10 mins. After the first shot it was fine as it had been cradled back in my arms for 5 mins before the next shot

yeah really easy mate ! I had to use 0.28g minimum in my other WE rifles to make them shoot level (aside from my M14)