Jump to content

mamba17

Regular Poster
  • Content Count

    89
  • Joined

  • Last visited

Everything posted by mamba17

  1. Finally! the project is completed, Re tuned as I don't thrust stock shimming(always way off). Set up for UK limit of 350FPS with a very conservative ROF of 18-20 using 7.4V 15C lipoly. By the way both lower receivers have different serial nos.
  2. It's great, got a shaved 2nd tooth of PB, stock, black cylinder (not the typical brass). Not happy with the shimming though( always way off),tuned it up. Hopefully! they have addressed the problem of gear shafts constantly breaking. No complain though as G&P's are always great platform for upgrades. And by the way all import G&P already have 8mm bearing GB. I opened and tuned one of my team mates G&P M16A3 with M203 and it got an 8mm bearing GB. I always buy straight from hongkong, at least this way your guaranted to have the brand new stocks or models.
  3. Bro! I only own a couple, the rest are orders from my teammates .
  4. My G&P Magpul DX, completely stripped down. ( all External parts change with either Magpul nor G&P parts) The AEG Started like this! Very Dull! Then Stripped it down! Changed every stock externals 1. Magpul PTS ACS Carbine Stock 2. G&P TD M16/4 grip with Heat Sink(preference) 3. Magpul PTS MOE Handguard 4. Stick a G&P Zombie Killer Silencer (sand) 5. Troy style rear sight 6. G&P 552 red/green dot 7. Kept the G&P Magpul lower receiver and the Vltor MUR upper receiver A very nice Magpul AEG! Wth its big brother
  5. You can compare it with TM AKS 74U EBB, It is really good.
  6. Yup! It so virgin, I need to devirginized it first............. Pretty hot for UK FPS limit (Take it down first to change spring to SP90 and Guarder V3 SG with bearing.
  7. Here's my CYMA 046 Electric Blowback, awesome piece of hardware, the blowback system is better than the KA Galil, Built quality is great, woobles are already a thing of the past.
  8. Check this out bro. http://www.kongpower.com/product_en/produc...pkind_recno=MKP
  9. I have read a lot of horror stories about lipoly's didn't live airsofters expectation, their playing life was shortened. Is it the lipoly or how we maintain them? Lipolies are great to use but we should know how to take care of them, or we are just wasting our hard earned money by not looking after this next generartion AEG batteries. Lipolies are used basically by battery powered RC cars and planes. Without proper maintenance by balancing each cell, we are shortening its life cycle. I have been using lipolies for almost 2 years now not knowing that any imbalance would waste my lipo.
  10. We have an indepth review of this sorbo's on one of the Popular Airsoft Internet magazine, I forgot what issue though. Face of between a regular/stock set up compared to the one with sorbo pads. Hands down, they are a lot quiter. Here's the link then scroll down to check out the sound test done by Matt Lawson from Alabama, http://www.airsoftresearchsyndicate.com/ Note: Putting this on could significantly loss FPS due to decrease cylinder air volume capacity. What we suggest is putiing on a stiffer spring which is legal on your country.
  11. And if you are a Tech guy and wants to do your own, they're readily available ARS Sorbo pads. Sorbopads Installed on Bore Up Cylinder Head and Stock Cylinder Head You need to reinforced it with stock cylinder head pads by supergluing them together. Set up on Bore up cylinder head for perfect AOE (Hi ROF set up), I have used mine for my 500FPS semi locked SAM R. After Several months, still looks great, no signs of wear and tear.
  12. Oh, and mamba: that's a really nice piece, but pleeease remove the picture with it in the MEU box, it ruins it all Just showing where it all started. But ya! I shouldn't have put it on the MEU box. @ everyone Thanks guys for appreciating a piece of art.
  13. It's a King Arms QD Rail, I am getting all my stuff in Hongkong(AirsoftGlobal)
  14. Highly Customized Springfield TM 1911 (MEU Base) Internals - LCT Barrel Bushing For Marui 1911 / MEU ( Type 2 / Stainless ) - LCT Recoil Spring Plug & Guide For Marui 1911 / MEU - KM Stainless Steel Hammer For Marui MEU ( Delta - Silver ) - Shooters Design Steel Chamber (S.A. 45 Auto) For Marui Hi Capa 5.1 Series ( SV ) - Shooters Design 5 Inch Steel Outer Barrel For Marui Hi-Capa 5.1 ( Straight ) - Guarder Enhanced Recoil/ Hammer Spring For MARUI MEU/M1911 ( 150% ) - Stock TM hop up Externals Specs. Tokyo Marui M1911 MEU
  15. My G&P collections. Commando! CQBR!
  16. Japanese technology have landed on British soil several months ago. Intruducing the ARS MASK (mechbox anti shock kit). It helps prevent premature GB hairline cracks and helps reduce signature muzzle noise. Close up pics of MASK Cylinder head Close Up Mask Piston Head with Bearing Review on MASK on 2 different GB set up (450FPS semi locked and 350FPS at 25-30ROF) during the winter months and summer months. Each set up had consumed 1000 rounds of .3 and 20,000 rounds of .2, split up at 2 different time of the year. I started this test last December where temperatur
  17. We have done an extensive field test since its first release last year and it passed with flying colors. First this came, the SW Panther (Came in October last year, the guinea pig) Then came its sister feline ( the SW Cheetah....Came a couple of months after receiving the panther ), same function but reduced in size. Can easily fit any butt tube. Welcome to the innovations of AEG computers with Active Breaking and 2-3 round burst depends on your set up not sacrificing your full auto by holding the trigger .4 of a second after the burst rounds. Now you can convert any AEG by repr
  18. Before anything else I am not connected to any manufacturer, I am just sharing what I've got. Several tango's are coming fast to take the bunker that you are depending. Adrenalin's rushing, full of mixed feelings of being excited and nervous. Took off all your magazines from your vest's mag pouches, lined them all up, ready to engage the OPFOR, then the inevitable happened, you were engage in a fierce exchange of hot bb's, suddenly on your second magazine your AEG stopped firing. You were so frustrated and annoyed that it let you down, walked back to the safe zone and start analyzi
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.