kruck

Try it outdoors, see if it is similar to my photos posted at the start. Could be to do with the ambient light. I don't have the sight any more (I don't really use the gun it was attached to anymore) so I can't provide indoor photos for you.

Someone made a post a few pages back, about removing that plunger that makes the hop adjuster click, and shimming the rod with teflon tape, so you can adjust the hop more precisely. I did this and found I could get a perfect hop setting, whereas with the clicky adjuster I couldn't. Something to bear in mind when you take it all apart (and if you lose it).

Look back a few pages, sounds similar to my problems. There is enough info back there to help you take it apart as far as the rubber methinks. You need to soak the rubber in acetone, for a couple of hours, then let it dry for a day or so, then try again. The rubber has expanded with the addition of lubricant, which can get there all sorts of ways, and is jamming the BBs in the barrel. Mine was too far gone and the above method didn't work, had to order in another rubber from den. Since I replaced it its probably fired 5-600rds flawlessly.

GBB MP7, wearing OD jacket + trousers, with a camera on his head..sitting on a blue chair in the safe zone. 8 mins of salvageable footage from sunday Most of it was briefing + waiting for game on, followed by my shooting someone on some stairs and the camera cutting out (think the battery is *fruitcage*ed), which was the start of a ludicrous amount of kills, on a bottlenecked staircase. + I think heroshark should start making airsofting cups

After conveniently missing me Sorry about the balls, I got a 5 shot shotgun blast the day before on my man bits, stung like a *badgeress* My nipples weren't very lucky either. I took a 3rd burst on one, and one on the other from point blank There was me + 2 others who have been 4-5 times, then the rest as you say. Couldn't beat going up a team of people who knew nothing of the site, however. Probably why it was so easy to flank, at times.

Aye, brit tac is a fantastic site, and this sunday's game was especially good, playing against the AC guys, with fantastic scenario to boot (Columbian drugs Cartel vs. British SF, we had about half "regulars" on our team, the rest were all fairly new). Must say the AC guys put up a hell of a fight. I'll see if I can get any freeze frames from the video camera (which the AC guys all but destroyed) I had on my head. Might even see a shot of me in a mirror, if I'm lucky...

Yea, just ordered one of the FAB ones, cheers.

Fantastic performance all round, however...bad news. After finally getting a sling that fitted the teeny tiny sling loops on the MP7, about 2hrs before the end of the day, I noticed my gun was moving a tad free from the sling: Sling loop snapped off! I tried it on the other side, 30 seconds later: Going to have to get some RIS Sling mounts now!

Spare parts arrived, fully working MP7 again Going to give it a good skirmishing this weekend

Apologies for the delay. Anyway, it all started with this thread. My post is #14, yea I ordered it after seeing it in the news thread, whatever, it was shiny. I like shiny. After getting stopped at customs, having to pay the vat charge (about £8) and the Parcel Farce RANSOM fee (£13.50), the grand total was £95 shipped from Redwolf airsoft. Quite an expensive impulse buy, I'll admit - but worth every penny. It's about the same price as a TM Colt Python revolver is in the UK, for reference. I don't know *suitcase* about revolvers really, but I liked the look of it, and as I said.

ehobbyasia, favourite HK retailer of all time

With shipping and tax, my MP7 came to around £220 imported. You may save around £30, or £70 if it doesn't get stopped at customs - but no warranty.

They are in at dentrinity. Product # is KSSAR148

Don't have a dremel. I do have a drill though

Alright then, may as well. Send me a PM if you want one + how many and I'll order tuesday (if I can).

Anyone know where I can get a replacement hop rubber from? The acetone solution didn't work with mine unfortunately. Edit: found them at den, however they only do express shipping

Tried the heating method, didn't work. Once this thing is working, that's it. I ain't doing anything to it again

I had the same problem, ended up stripping the screw. I ended up drilling a little hole at each side, that could be used with a flat head screwdriver. Still very stiff to move though, but I got it out eventually.

Good news After opening the box up (I put it in the box, to protect it from me) I noticed that some acetone had got on the MP7s body, and in places wrecked the finish. (that's not the good news). I was going to sell it, but in the condition it's in, I doubt I'd get a decent amount for it, and the wrecked finish just made that worse. So I decided, fudge it - gonna have to fix it. Took it apart, again, got to the pin, and decided I wasn't going to take no for a mother*fruitcage*ing answer. Drilled about 2mm in with a drill bit (the smallest I had) about 1mm wider than the pin, on both

This happens to me when the battery is running low, fresh batteries sorts it.

It's stuck, it won't budge either way now. And yea, I put it in in the wrong way.

I tried hammering it out, pulling it out with pliers, I even tried to drill the locking spring out from the opening (didn't work). It's now stuck about half an inch out, not budging either way. I'm leaving it alone now, I'm just going to break something even more, as I said it's going to a professional now. I might even sell it it's pissing me off so much

Ahem, false alarm. Still not working. One of the rear body pins is now completely stuck too, can't disassemble at all now. I give in, it's going to a professional.

Good news, by judicious application of acetone it now appears to be working. Just emptied a couple of mags in full auto, and a couple of mags in single, no misfeeds all working well. Once I get some cheaper BBs to test with (I'm burning through these .28g, I have only 3000 left ), I'll dump a bunch of mags through it to verify.

Right, that *fruitcage* pin won't come the *fruitcage* out. I finally resorted to drilling it out, broke all my drill bits. *Ubar*