QDRenegade

Oh!.. You are absolutely correct on the latter. Both the AEG and GL barrel were cut down to the rail. I wanted the suppressor to sit rather flush with the rail and the Madbull 2 piece barrels with a compound saw ended up being great for this.

Whatcha talking bout Willis?

Love that combo Hate that the M203 trigger guard doesn't fit, though!..

Moar Tupperware! Airsoft up close. 9mm further away.

Not mine but those of you that dont surf ARFCom are missing a real diamond in the rough... New Keymod rail! Everyone *knew* they looked like shelves but seeing it really makes it great!

Got my +2 and some better springs across the board. Really (surprisingly so) impressed with everything else in the WE.

That extension is this only thing on the WWW that I have seen to give the +2s scale! I am amazed they are not documented anywhere despite being popular!

Those +2 extensions look a lot larger on the gun than in the retail photos. That said, the G is awesome!

Random musing... Geissele. Guy-Sell or Jih-Zell? Actually pronounced by their SHOT employees "Guys-Lee" - not even in my list of guesses. Mkay back to work.

Happy Tuesday gentlemen. Except you guys with awesome RMR slides and Ospreys... pound sand, jerks! Sincerely, my humble (and humiliated) we19.

@Leon I was in a similar predicament as you a few months ago - I do my best to make sure parts really fit together. I dont know details about your budget or resources but plan C is ~$40 and 10-60 minutes of work depending on your tools. IMHO given the level of personal detail in your AEG, this could be right up your alley. That or Im just nuts. Anywho... Get an appropriately sized Madbull Daniel Defense barrel, sold by other retailers simply as Madbull adjustable barrels, that is made up of two parts. The first part is the portion that goes into the upper receiver and is held in place b

Neither artsy nor dim but it highlights the magazine collection. It sucks - magazines are the lifeblood of a good shooting gun but, in the airsoft world, a proper amount costs as much as another good shooting gun! Took this a while ago for the Magpul thread but never put it anywhere. This poorly shows a growing QD collection. QD Surefire, QD RMR, and QD M203 are mounted. ETA this probably doesnt fit the thread. Im feeling inspired to do a few proper-like. ETA Ive always been curious what a " youve acquired, dont use, and havent been bothered to sell" thread would

I owned a real one for approximately two weeks. Im pretty sure if I went to an airsoft event in that time, I would have a black eye in the first hour That said, Im tempted to try a totally legit Chinese version! Also, beautiful blaster! Kinda goes without saying nowadays. ETA - Before anyone jumps on me, I know military personnel have used the ACOG successfully for many years! Its totally me. Accupoint is a better fit and personally an all around better optic! Though it may not take a bullet...

I like that better than buy once cry once! Well since today is so lively and Ive mostly been posting , heres a little something I drew up a month or so ago. Its a response to my receiver extensions that are a pain the *albatross* to install given one needs a long screw driver and needs the screw inside to align with the spring guide AND has to manage a wire inside the tube without destroying or otherwise pinching it. Then the LiPo has to share the tube with said wire leaving the connectors dangling out the back. In a nutshell, its a QD receiver extension that allows for quick insertion

Only a mere $575 with an appropriate QD mount. Itd go well with my RMR and TR24. My name is Rob and I have a problem.

I already waste too much money on this stuff! Every time i get ready to get my rails, i see it as two skirmishable AEGs or one nice optic! I really want an RX30

It sounds like a company to company issue. Since Madbull goes for licenses, the OEMs get a say in how the airsoft parts are made. In the case of Troy, they dont want anyone to get an airsoft part at a gun show. With the airsoft text on the body and a blocked gas port (because a low profile gas system going all the way into the upper receiver in an AEG is just as meaningless as anti-rotational pins) should keep even the clueless real steel buyer from getting ripped off with a Madbull product. I am certain thats an OEMs primary goal. Im glad to hear the DD rails are pretty solid now, though! I

Whoops yeah thats a nice detail I left out. Long day! Has anyone CNC engraved the missing elements onto a TM/WE/KSC slide? It seems the G on the WE slide needs another stroke then a few letters as well as "Gen4" to be complete. Seems like that would take a mill or engraver all of 30 seconds after getting set up. Im thinking the process may cost as much as a replacement slide but all the Prada parts, in my experience, always seem to offset the better looks with shittier performance. Cheers

I *fruitcage* love Tupperware Two recent additions to the collection! The WE's trades kinda suck but it is a blast to shoot. Good pop and all! On a side note, the Madbull HEMS, Trinity, and Tident all share the same tube diameter so you can mix and match ends. The HEMS knurled end has a spring loaded mech that prevents the POI from shifting as it does with every other one of my suppressors. The WE and KSCs also fit fine in the Crye Gunclip but only the KSCs fit in the comparable SERPA. Anywho... I was shooting a little wide so photos with the suppressor are ju

Its my understanding that Madbull receivers are made by VFC then engraved by Madbull. At the very least, all the receivers are designed to use VFC bolt releases, charging handles, etc. Ive had no luck getting spare VFC parts to test, though.